I. Installation of Vu+

1. Connecting Signal Cable
Vu+ UNO 4K SE is designed to integrate Pluggable Dual FBC(Full-Band Capture) DVB-S/S2 tuner or
FBC DVB-C(Cable) Tuner which supports up to 8 demodulators. For the best use of Vu+ UNO 4K SE
the following under combination are recommended.


1. 1) Dual FBC DVB-S/S2 Tuner



2. 2) FBC DVB-C Tuner (Cable)




2. Connecting the TV
Vu+ provides a variety of audio/video connection methods.


1. 1) Connecting TV via HDMI cable
For the sake of the best picture quality, especially for digital TV, HDMI connection is recommended.
Most HDTVs have HDMI connectors to ensure the highest picture quality. In the rear panel of Vu+
one HDMI connector is available for this purpose. Connect your TV to Vu+ using a HDMI cable as
follows.





2. 2) Connecting TV vis S/PDIF connection
Vu+ provides S/PDIF connectors. When you have an A/V receiver with S/PDIF digital audio input,
this connection is recommended to enjoy the best audio quality.








3. Connecting Power
A power cord is provided as one of the basic accessories of Vu+.

1. - Connect the power cord to the connector at the rear panel of Vu+.
2. - Connect the power cord to a power outlet.
3. - Turn on the power switch at the rear panel.

NOTE : DC input condition
* 12V 5A


NOTE : means Remote control operation order.




4. Power ON/OFF
[ : Press Power key / Press MENU key > Select Idle Server Mode/Reset]
There are several ways to turn your Vu+ ON or OFF.

• Complete Power Shutdown
There is a Power Switch in the rear panel and once it is ON, you do not need to turn it on or off each time.
It takes a longer time to boot the system if you turn it off by this switch.
• Idle Server Mode
POWER key is normally used to turn the power of Vu+ on or off. If you press POWER key, it instantly
switches your Vu+ off or on. In this mode, the system is not completely shutdown and thus it takes a
shorter time to turn it on and off.

• Standby Mode [ : Menu > Idle Server Mode/Restart > Standby]
Standby is used to reduce the standby power consumption. Vu+ is designed to be energy-efficient
and to guarantee the power consumption to be under 1W in the standby mode.