Vu+ UNO 4K SE supports multiple recordings up to 16 at the same time.

• 1) Instant Recording

[ : Press REC key]

Press REC () key to start the recording of the current program.



Five recording options are given.

- Add recording (stop after current event)
  This option is used when you want to end recording when the current program ends.

- Add recording (enter recording duration)
  This option is used when you want to manually set the length of recording by entering a certain number as below:



- Add recording (enter recording end time)
  This option is used when you want to define a certain date and time when the recording is stopped.



- Add recording (indefinitely)
  This option is used when you want to keep recording running without a specific end time. Recording will
continue unless you stop it.

- Don't record
  This option is used to exit from this menu without recording.

• 2) Recording by Timer

[ : Press MENU key > Select Timer]

You can manage recording process using Timer List menu. Press MENU key and select Timer on the menu.





In this menu, COLOR keys are assigned for each different function.

- RED (Delete)
  This option is used to delete a timer.

- GREEN (Add)
  This option is used to add a timer.



- YELLOW (Disable)
  This option is used to disable the timer and X mark will appear.



NOTE : if you want to enable the disabled timer, press YELLOW key again.

- BLUE (Cleanup)
  This option is used to remove those finished timers from the Timer List .



NOTE : Make sure that the HDD on your Vu+ has enough free space available for recording. If the free space on the HDD is not sufficient, recording might stop before the defined end time.

- Stop Recording [ : Press REC key > Select "Stop Recording"]
  If you want to stop recording, press REC again while recording is running. Select Stop Recording .