Suchergebnisse

Now everything is back to normal. Subtitlle is working again without crashing enigma. Thanks

hello, I have an issue and I do not know how to handle it. I have a Vu Zero receiver with VTI 14 installed. Since yesterday when I try to zap on Filmbox Extra HD ( thor 0,8 W, freq 12.034 V) my enigma (VTI) creshes. After several tests I observed that it crashes every time subtitle is activated on this channel. I can not explain why? I have also crashed log. (Versteckter Text)I tried also with other images (openpli, open vti, black hole) and the result is the same: enigma2 crashed. (Versteckter …

I just use cccam..I'm not an expert of oscam :). I read my card with cccam. When error appeared I used cccam2.1.3, cccam 2.2.1, cccam 2.3.0 and also a combination of oscam and cccam (but oscam is not used) oscam 1.20-cccam 2.2.1. Now I switched to osscam 1.00-CCcam 2.2.1 and also I created a swapfile of 256mb for memory... What can I tell you also is that error appeared also on old VTI images. Before VTI 8.2.3 a had an old VTI 3.0 image on my vu uno and that error appeared. I have also a vu duo …

Yes all equipment is ok. Strange is that when error appears when I zapp between channels no metter the channles are scrambled (but are opened by my local card) or are free channels that error appears. On scrambled channles I get no picture and error, on free channles I get picture and also that error on tv screen. But after I reboot the receiver all is back to normal. Very very strange.... I think that this error is related to that kernel error...

hello, I have a vu uno stb and I'm using VTI 8.2.3 image. I use my local card in this STB with cccam. Sometimes when I'm zapping between channels I'm getting this error:"No Data on Transponder (Timeout reading Pat)".Then I get no picture on channels that are opened with my card and that error appears on my screen. The signal is good. Also when I switch to a free tv channel I get picture but also that error appears.I tried to restart cccam but the error is there. Just after I reboot completly my …

Hello, I have an Vu Duo and Vu Uno and VTI image installed. Can you please tell me if in VTI image is it possible to select the EPC language and audio and subtitle language by default like in open pli image? I use and old VTI image (VTI 2.6) but I can not select my default EPG language, for example. There are a lot of channels that use 3 EPG language (because the same channel is broadcasted for 3 countries) and my image selects de default one.... Or is it a plugin to install in order to solve my…

hello, I have a question: I understood that if I have installed VTI 3.0 image and I want to upgrade my Vu Duo box to VTI 4.1 a need first to flash a file....Do I need also to reflash my box in case of downgrade from VTI 4.1 to VTI 3.0? thanks

Zitat: „Originally posted by Humorator I´m not an CCcam expert, but you can try to set the priority in the cccam.prio file ... not sure if it solves your PID problem, not even sure you can set a PID prio in cccam, but it´s worth a try ... Quellcode (1 Zeile) I only know that it´s (theoreticly) possible with OSCam and dvbapi ... there you can config the priority as followed: Quellcode (1 Zeile)never tried, because of no need to setting up oscam just for this channel ... don´t know if it´s worth i…

hello, I have an original Focussat card (CAID B02) and a Vu Duo (VTI image) receiver with cccam as reader and I have a problem with one channel from this package. On Filmbox Basic (freq 12034V, 7/8, 28000, sat. thor 0.8W) I have no sound, only image. Another guy from other forum discovered that on this channel there are 2 ECM PID (15E6, 15EE) assign on the same SID(772B). When I'm using cccam I only use ECM PID 15E6. The other ECM PID it is not used by cccam. Somebody said that when ECM PID 15EE…

Now,with Fancontrol2 plugin my Vu Uno fan stops in standby.

hello, Today I had a strange problem with my VU Uno. Let me explain a bit. I have installed on my Vu Uno VTI3.0 image. After I configured everything , installed my plugins...so on...I want to backup my entire image on usb stick. Everything was ok, my backup succeded. After that I want to restore my image to verify the backup. After restoration, my STB started ok, without any issues BUT I observed something very strange: my STB did not show correct my time zone. Before backup my time zone was set…

No. I'll try. Thanks

Hi, I have a Vu Uno and I have installed VTI 3.0 image. I have a problem: when I try to stop the fan during stand-by it doesn't stop. I installed fun control plugin and I set the option FAN basic action OFF. Am I put my receiver in stand by mode the fan doesn't stop. I have also a VU DUO and everything works well regarding the fan control (it stops on stand-by mode). Is there a solution for this issue? regards

Hello, I have a VU DUO STB and I check my logs on /VAR/LOG/messages. I founded many of these: Jun 14 22:06:30 bm750 user.debug kernel: out of order segment: rcv_next DF382759 seq DF382792 - DF382D32 Jun 14 22:06:30 bm750 user.debug kernel: ofo requeuing : rcv_next DF382792 seq DF382792 - DF382D32 Jun 14 22:06:33 bm750 user.debug kernel: out of order segment: rcv_next DF384C4A seq DF384C8A - DF38522A Jun 14 22:06:33 bm750 user.debug kernel: ofo requeuing : rcv_next DF384C8A seq DF384C8A - DF38522…

Is it possible that in next releases to apperar CAID info(what CAIDs are available) for the encrypted channels (even if a channel is not opened).Now the available CAIDs are shown only when a channel is decrypted. In HDglass14 this info was available. thanks

hello, Was it found a sollution to the problems described by me? Today I made a BIG mistake: a restart my GUI when I was zapping on a scrambled channel. NEVER, NEVER restart GUI or receiver when you are on a channel which we can not decode. The result: I was unable to use my receiver. When I was trying to zap to another channel my receiver blocks because on each restart it was on same scrambled channel. The solution: I deleted the scrambled channel and then it works. regards

Maybe I was not so clear when I gave the description of the problem, so please make the following tests: 1)-when you watch a scrambled channel (for example with a valid card subscription) turn off the receiver from de power supply and then unplug your subscription card -or if we are connected to a server (for example: cccam server witch we are able to decode the channel), after receiver turn off , unplug your ethernet cable - turn on the receiver - we will see that after enigma is loaded, if we …

hello, I encountered 2 problems using VTI 2.3 image with DD subtitleplayer 3.02 installed and without DD 3.02 installed. - without DD subtitleplayer installed: if we switch off (from power) the receiver when we are on a scrambled channel (and for example we can not decode this channel, we do not have a valid card or we do not have internet connection in order to have acces to a valid card) and after switch on the receiver, then we are blocked (no green screen). We can not go to another channel. …

Hello, I can confirm these bugs on VTI 2.3 image. Also if we switch off (from power) the receiver when we are on a scrambled channel (and we can not decode this channel) and after switch on the receiver, then we are blocked (no green screen). We can not go to another channel. The only way is to switch off and then to switch on on a free channel.

yes I use anather skin and until now everything is ok.