Suchergebnisse
Suchergebnisse 1-20 von insgesamt 31.
Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen
-
I have just done this...(added the vu+ to my network) I can see the various recordings, and the vlc logo,s they do play, via vlc, but its stop go I notice there are several files that are part of the various films and assume that the stop go, is where the various segments start stop so although related to the thread, my question is, how do i convert the files to a watchable format on my comp?? eric
-
RE: Device name and mode
Beitragjust an update my smartgo readers/hub is now fully working Thankyou now all I need is a few fully working cards eric
-
RE: Device name and mode
BeitragI am very gratefull to you, and RealMagic I will reset the readers and use the lines posted (the oscam problem ((fried my card on my 800)) has been resolved, via the internal reader on the VU) many thanks eric
-
usb hub/and smartgo+ readers
BeitragThankyou very much (ps thanks also to your football team, it put us out of our misery) I have also downloaded the cccam tool, and will have a play around, and see what I can find out for myself eric
-
usb hub/and smartgo+ readers
Beitragthat was a fast responce, thank you looks like the unit is not seeing the hub/reader eric
-
usb hub/and smartgo+ readers
BeitragThanks for your reply RealMagic But I am not sure how to do that would you be good enough to post a "how to" once I have this working, my plan is to use Oscam on the smartgo but to start with, it will be cccam, on a fta card eric
-
usb hub/and smartgo+ readers
Beitragbeen a while since I have been here, (holidays/work) I was wondering if its possible to use a usb hub with a few cards in the smartgo readers one card is a n%s fta card current image is the dreamelite and the usb kernal module manager is set to yes on the various usb modules the hub is externally powered and when connected to the front usb socket, all 7 reader lights are on (only 2 readers) SERIAL READER : /dev/usb/0 smartreader+ SERIAL READER : /dev/usb/1 smartreader+ the set does work on my db…
-
Sky UK Italia cards
Beitragwell if he did,..like me, his card will be fried eric
-
One for all 7960 remote
Beitrag@ cycloxit I also have slingplayer running, currently i change channels via the web interface could you post a bit more info regarding the virtual remote?? eric
-
best epg plugin??
Beitragthanks for your reply cytrax I did have Dream Elite, but had a few issues with it I have set up multy boot, via meo, and I did reload Dream Elite as a multy boot image but it would,nt boot up HDFreaks seems to work ok as a multyboot image Think I need a second VU+ unit eric
-
best epg plugin??
BeitragWhat I was looking for, is a epg plugin that allows a 7 day+ listing, prefribly via download, rather than updating via say hip hop on 28 east and if such a plugin exist, which is the best image to get such a plugin eric
-
Picture Quality
Beitragsd pictures as far as I can see, are as good/bad on either the 800/vu+/500 hd piccys, again are on a parr with the 800 but, the kathy units piccy quailty is best on both HD and sd but a difficult unit to get on with also when comparring picture quality, it needs to be done viewing the some channels as diferent providers offer differing piccy quality but these are only my opinions, rather than expert eric I have also edited my post... thanks for the explination
-
Smargo
BeitragSERIAL READER : /dev/usb/tts/0 smartreader+ SERIAL READER : /dev/usb/tts/1 smartreader+ this defo works, ...I have a conex card running here, in the smartgo reader (using CCcam) eric
-
RE: Smargo
BeitragZitat: „Originally posted by sapi100 What is the good frequency settings for Smargo reader for Conax cas 7 card (CD Nordic & Hello HD)? I can just read my cryptoworks card with Smargo.I have no frequency settings now. Any body try new firmware 1.05 to Smargo?“ I am not sure that I understand your question, the smartgo reader, reads cards so are you talking about mhz settings?? you do need to get the reader into dreambox mode and after that, it should read the card eric
-
best epg plugin??
BeitragThankyou again looks like I need to invest in a translator eric