Suchergebnisse

Es tut mir leid, wenn mein Deutsch schlecht ist, aber ich keine Antwort auf meine Anfrage in der English Corner hatte. Cannot record TNTSat Ich kann TNTSat nicht aufnehmen.Ich habe jetzt entdeckt, ich denke, dass TNTsat dvbapp2 crash macht. Ich habe ein crash log, aber verstehe ich es nicht. Kann jemand mich helfen?

After many years of trying I have finally got a TNTsat card working with OScam only to find I cannot record anything. It goes through all the motions of recording but but I end up with empty files as below.\Users\F\Desktop\untitled.jpg 9k= It is the same whether I try it with the recorder or just press record. I have no problem with other channels just TNT. I don't know whether it is my Oscam configuration or what.

I can use 28. It is running perfectly well when I try to update crossepg only to be told there is no NIM. It is only when I change the my satellites.xml file that I am told my configuration is wrong although it was alright before and no matter how I try to reconfigure it does not want to know. That is why I thought I might need a satellites.xml specifically for a VTi image. I would add that I have refreshed the image and still get the problems.

I have been using crossepg but now when I try to update Astra 28 I get the message “No valid NIM found”. I haven’t the slightest idea what a NIM is where it should be found. It is mentioned in my attached settings file.I have tried replacing my satellites.xml but while 19 and 13 work the message for channels on 28 is ‘’Service unavailable check tuner”. This applies whether I set it up as simple or advanced. I presumably need a satellites.xml peculiar to my VTi image 8.2 but on this website there…

Thanks for that. I'll give them a go. I've found all three in the Plugin section in case you cannot download them directly.

Sorry they don't seem to work at all today. However a typical one was #EXTINF:-1,TF1 179.ts which suggests x284 transport stream. I'll get back If get seething workable

I wouldn't mind Oscam 1.20 and Cccam 2.1.3 which was available on older images. I am using Oscam for TNT clines but would welcome Cccam as well to read my NC+ card. I've tried adding it to Oscam.server but I cannot get it to work in Oscam

I've tried putting entries from a M3u into a bouquet using dreamedit. When I tried playing them whilst the sound was perfect the image just froze. I know nothing about IPTV. Do I need anything else to make them work on a VU+ Uno with a VTi 11 image? Since the M3u was freely available from another site I accept that its probably not the best of sources.

I had CCcam 2.3.0 installed and the Cyfra+ card ran without a problem. The dummy card was just not recognised although my Atlas read the dummy just as if it was an original Cyfra+ card. However I have found a solution. I downgraded to CCcam 2.1.3 and guess what it works. Somebody who understands the CCcam software might be able to explain although I probably will not understand it. I realise I could use f and clines with another enigma box but I just wanted something cheap and cheerful (a Fergus…

I have been trying to use one of these with my VU+ Uno. blue1.jpg If I put the Cyfra+ card in the second slot the STB decrypts without problem. With the dummy card from the splitter it does not want to know. The dummy card works in my Atlas 200 without any problem so that is not the problem. Presumably I must configure my Uno somehow. Any suggestions? I am using latest Vti image.

Short and sweet. Thanks speedy_j. I can stop looking.

I used to use a Diablo for TNTSaT (it was easier than configuring Oscam) but even Oscam seems to be out now. Is there any way of now using a TNTSat or a Fransat card in a Uno?

I manage to delete all the channels but when I loaded Cyfra+ it still did not work. However afterwards I did do a factory reset and loaded a default service list for Hotbird. This seems to have solved the problem. What is more I have managed to delete channels with dreambox edit whereas I could not before.

The problem is with Cyfra+ H. Strangely it is not on Cyfra's HBO chanels. As I mentioned I have only had just over a week so I was not aware of 'Clear before scan.' Automatic scans fill me with terror - all those sailing and "watch the paint dry" channels in Arabic. What I could do is disconnect the satellite first so it does not find anything then manual scan afterwards. I'll try it tomorrow when I have more time. Thanks for your help.

Ich habe jetzt mein Profil entsprechend ausfüllen, Entschuldigung. I also apologise - my image is VTI. I see it enough times when I reboot I have added satellites.xml to etc/tuxbox, rebooted and rescanned the channels but with no luck. It might help if I knew to get a revised channel list to work so I can delete them and scan fresh.

I have a recently purchased VU+ uno and I am using a vix image I am getting the above error on a few HD channels. Google shows this to be quite a common problem but not much practical advice. Of the advice that does seem practical I have upgraded the FPGA via internet with "SUCCESS" I have added satellites.xml to etc/enigma2. I am not sure this is right because there was no satellites.xml there in the first place. I have rescanned the channels but I have been unable to delete them first. I have …

Danke, SweetMP4 I formatted it using the UNO first to EXT3 but when I tried to initialise it I got the response "Error at creating file system at device/ dev/sd1. Please create file systm manually." So I took it to the computer to manually make a folder named movie. The computer did not recognise the HD I then formatted in fat. This time it initialised. I then set the Device in Device Manager mounted to /media/usb. However I still got "No HDD found or HDD not Initialised" when I tried to record.…

Can anyone explain how to change the recording path on the above image. There does not seem to be anything in device manager. I have had a go at the advice @ Make my usb as HD for receording but I am not having much luck. One problem is that I do not know on a VU+ Uno which USBs are 1 2 and 3 but trying all three I always get "not found". root@vuuno:~# 1s /dev/sd* -sh: 1s: not found root@vuuno:~# 2s /dev/sd* -sh: 2s: not found root@vuuno:~# root@vuuno:~# 3s /dev/sd* -sh: 3s: not found root@vuuno…