Enigmalight / Ambilight für 4K-Boxen (ARM)

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Hallo zusamen

      ich hätte mal kurz ne frage, würde meine 8 Kartelight wieder gerne in Betrieb nehmen auf einer Uno 4K SE die am Dienstag kommet wie muss ich hier genau vorgehen.
      wenn ich das Plugin von hmmmdada installiere läuft dann schon alles oder muss speziel noch was angepasst werden?

      Hab die letzten Seiten gelesen aber aber kann mir nicht wirklich vorstellen wie ich genau vorgehen muss.
      Schonmal danke für die Untetrstützng.
      :325:

    • @hmmmdada Ich bastle mir schon Tagelang nen Wolf ! Habe leider auch wirklich keine Ahnung von dem Zeugs. Kann nur lesen und mit copy und past versuchen. Hier mal die Ausgaben der Box

      lsusb

      Spoiler anzeigen
      root@vuuno4kse:~# lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


      dmesg

      Spoiler anzeigen

      root@vuuno4kse:~# dmesg
      [ 0.000000] Booting Linux on physical CPU 0x0
      [ 0.000000] Linux version 4.1.20-1.9 (plnick@build-plnick) (gcc version 4.9.2 (GCC) ) #1
      SMP Mon Nov 27 14:24:54 CET 2017
      [ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
      [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
      [ 0.000000] Machine model: UNO4KSE
      [ 0.000000] moving dtb from 0x0000000007628000 to 0x00000000008ecc2c
      [ 0.000000] bmem: Reserved 633 MiB at 0x0000000016600000
      [ 0.000000] bmem: Reserved 616 MiB at 0x0000000099700000
      [ 0.000000] cma: Reserved 16 MiB at 0x0000000098400000
      [ 0.000000] Forcing write-allocate cache policy for SMP
      [ 0.000000] Memory policy: Data cache writealloc
      [ 0.000000] On node 0 totalpages: 516096
      [ 0.000000] DMA zone: 700 pages used for memmap
      [ 0.000000] DMA zone: 0 pages reserved
      [ 0.000000] DMA zone: 89600 pages, LIFO batch:15
      [ 0.000000] HighMem zone: 426496 pages, LIFO batch:31
      [ 0.000000] PERCPU: Embedded 12 pages/cpu @d4dac000 s16896 r8192 d24064 u49152
      [ 0.000000] pcpu-alloc: s16896 r8192 d24064 u49152 alloc=12*4096
      [ 0.000000] pcpu-alloc: [0] 0 [0] 1
      [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515396
      [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=jour
      nal rootwait rw coherent_pool=2M vmalloc=658m bmem=633m@358m bmem=616m@2455m
      [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
      [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
      [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
      [ 0.000000] Memory: 741940K/2064384K available (6221K kernel code, 299K rwdata, 2068K ro
      data, 308K init, 199K bss, 1306060K reserved, 16384K cma-reserved, 409572K highmem)
      [ 0.000000] Virtual kernel memory layout:
      [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
      [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
      [ 0.000000] vmalloc : 0xd6000000 - 0xff000000 ( 656 MB)
      [ 0.000000] lowmem : 0xc0000000 - 0xd5e00000 ( 350 MB)
      [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
      [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
      [ 0.000000] .text : 0xc0008000 - 0xc0820bdc (8291 kB)
      [ 0.000000] .init : 0xc0821000 - 0xc086e000 ( 308 kB)
      [ 0.000000] .data : 0xc086e000 - 0xc08b8dd8 ( 300 kB)
      [ 0.000000] .bss : 0xc08bb000 - 0xc08ecc2c ( 200 kB)
      [ 0.000000] Hierarchical RCU implementation.
      [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
      [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
      [ 0.000000] NR_IRQS:16 nr_irqs:16 16
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd6002000, parent irq: 93)
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd6008000, parent irq: 64)
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd600aa00, parent irq: 65)
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd600c640, parent irq: 95)
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd600e200, parent irq: 58)
      [ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s):
      2)
      [ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd6010380, parent IRQ(s):
      3)
      [ 0.000000] MCP: Enabling write pairing
      [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
      [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3
      , max_idle_ns: 440795203123 ns
      [ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
      [ 0.000011] Switching to timer-based delay loop, resolution 37ns
      [ 0.000342] Calibrating delay loop (skipped), value calculated using timer frequency.. 5
      4.00 BogoMIPS (lpj=27000)
      [ 0.000353] pid_max: default: 32768 minimum: 301
      [ 0.000450] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
      [ 0.000455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
      [ 0.000892] CPU: Testing write buffer coherency: ok
      [ 0.001104] CPU0: update cpu_capacity 1024
      [ 0.001109] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
      [ 0.001321] Setting up static identity map for 0x8480 - 0x84d8
      [ 0.003860] CPU1: update cpu_capacity 1024
      [ 0.003864] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
      [ 0.003922] Brought up 2 CPUs
      [ 0.003932] SMP: Total of 2 processors activated (108.00 BogoMIPS).
      [ 0.003936] CPU: All CPU(s) started in SVC mode.
      [ 0.004284] devtmpfs: initialized
      [ 0.013286] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
      [ 0.013505] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1
      911260446275000 ns
      [ 0.014714] NET: Registered protocol family 16
      [ 0.016163] DMA: preallocated 2048 KiB pool for atomic coherent allocations
      [ 0.023121] cpuidle: using governor ladder
      [ 0.029135] cpuidle: using governor menu
      [ 0.036082] No ATAGs?
      [ 0.036111] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
      [ 0.036118] hw-breakpoint: maximum watchpoint size is 8 bytes.
      [ 0.036348] Broadcom Brahma-B15 readahead cache at: 0xd6314478
      [ 0.048092] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
      [ 0.048311] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
      [ 0.048705] SCSI subsystem initialized
      [ 0.048858] libata version 3.00 loaded.
      [ 0.049060] usbcore: registered new interface driver usbfs
      [ 0.049101] usbcore: registered new interface driver hub
      [ 0.049156] usbcore: registered new device driver usb
      [ 0.049223] Linux video capture interface: v2.00
      [ 0.049294] pps_core: LinuxPPS API ver. 1 registered
      [ 0.049299] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giomet
      ti@linux.it>
      [ 0.049320] PTP clock support registered
      [ 0.049726] Advanced Linux Sound Architecture Driver Initialized.
      [ 0.050769] Switched to clocksource arch_sys_counter
      [ 0.050981] FS-Cache: Loaded
      [ 0.052515] thermal thermal_zone0: failed to read out thermal zone (-22)
      [ 0.052609] NET: Registered protocol family 2
      [ 0.053086] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
      [ 0.053111] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
      [ 0.053152] TCP: Hash tables configured (established 4096 bind 4096)
      [ 0.053228] UDP hash table entries: 256 (order: 1, 8192 bytes)
      [ 0.053243] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
      [ 0.053379] NET: Registered protocol family 1
      [ 0.053602] RPC: Registered named UNIX socket transport module.
      [ 0.053606] RPC: Registered udp transport module.
      [ 0.053609] RPC: Registered tcp transport module.
      [ 0.053612] RPC: Registered tcp NFSv4.1 backchannel transport module.
      [ 0.053625] PCI: CLS 0 bytes, default 64
      [ 0.053943] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
      [ 0.053973] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters availabl
      e
      [ 0.054711] futex hash table entries: 512 (order: 3, 32768 bytes)
      [ 0.055911] NFS: Registering the id_resolver key type
      [ 0.055944] Key type id_resolver registered
      [ 0.055950] Key type id_legacy registered
      [ 0.055964] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
      [ 0.055971] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
      [ 0.056980] bounce: pool size: 64 pages
      [ 0.057026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
      [ 0.057037] io scheduler noop registered
      [ 0.057044] io scheduler deadline registered
      [ 0.057065] io scheduler cfq registered (default)
      [ 0.057301] brcm-gisb-arb f0400000.gisb-arb: registered mem: d633c000, irqs: 261, 262
      [ 0.058054] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
      [ 0.058443] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
      [ 0.058491] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
      [ 0.158629] brcm-pci f0460000.pcie: link down
      [ 0.158682] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
      [ 0.158721] brcm-pci f0490000.pcie: no identity map; PCI drivers may fail
      [ 0.258853] brcm-pci f0490000.pcie: link down
      [ 0.260210] brcmstb_memc f1102000.memc-ddr: registered
      [ 0.260250] brcmstb_memc f1182000.memc-ddr: registered
      [ 0.260439] brcm-waketimer f0417580.waketimer: registered, with irq 263
      [ 0.260652] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
      [ 0.261813] console [ttyS0] disabled
      [ 0.261838] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) i
      s a 16550A
      [ 0.993275] console [ttyS0] enabled
      [ 0.997101] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) i
      s a 16550A
      [ 1.006347] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) i
      s a 16550A
      [ 1.018670] loop: module loaded
      [ 1.022660] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 0
      [ 1.029224] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 1
      [ 1.035797] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM
      [ 1.043210] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
      [ 1.049254] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
      [ 1.066784] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl pla
      tform mode
      [ 1.075768] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
      [ 1.085455] scsi host0: brcm-ahci
      [ 1.089022] scsi host1: brcm-ahci
      [ 1.092500] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
      [ 1.100434] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
      [ 1.108371] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
      [ 1.115518] brcmstb_qspi f03e3400.spi: using bspi-mspi mode
      [ 1.121158] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found
      [ 1.127195] brcmstb_qspi: probe of f03e3400.spi failed with error -22
      [ 1.133674] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode
      [ 1.139844] m25p80 spi32766.0: found mx25l3255e, expected m25p80
      [ 1.145869] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
      [ 1.151126] 5 ofpart partitions found on MTD device spi32766.0
      [ 1.156969] Creating 5 MTD partitions on "spi32766.0":
      [ 1.162119] 0x000000000000-0x000000200000 : "flash0.bolt"
      [ 1.168039] 0x000000200000-0x000000210000 : "flash0.macadr"
      [ 1.174057] 0x000000210000-0x000000220000 : "flash0.nvram"
      [ 1.179985] 0x000000220000-0x000000230000 : "flash0.devtree"
      [ 1.186072] 0x000000000000-0x000000400000 : "flash0"
      [ 1.192103] libphy: Fixed MDIO Bus: probed
      [ 1.196623] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
      [ 1.202518] bcmgenet f0b00000.ethernet: failed to get enet-mux clock
      [ 1.221767] libphy: bcmgenet MII bus: probed
      [ 1.246589] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
      [ 1.252441] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
      [ 1.258564] xhci-brcm: xHCI BRCM driver
      [ 1.277262] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
      [ 1.283047] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
      [ 1.291167] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0
      x00010090
      [ 1.300076] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
      [ 1.306714] hub 1-0:1.0: USB hub found
      [ 1.310502] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
      [ 1.317776] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
      [ 1.323541] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
      [ 1.331433] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
      [ 1.339884] hub 2-0:1.0: USB hub found
      [ 1.343664] hub 2-0:1.0: 2 ports detected
      [ 1.348056] ehci-brcm: EHCI BRCM driver
      [ 1.352024] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
      [ 1.357813] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
      [ 1.375820] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
      [ 1.387776] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
      [ 1.394364] hub 3-0:1.0: USB hub found
      [ 1.398142] hub 3-0:1.0: 1 port detected
      [ 1.402322] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
      [ 1.408086] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
      [ 1.426049] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
      [ 1.437775] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
      [ 1.444341] hub 4-0:1.0: USB hub found
      [ 1.448201] hub 4-0:1.0: 1 port detected
      [ 1.452423] ohci-brcm: OHCI BRCM driver
      [ 1.456371] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
      [ 1.462147] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
      [ 1.470074] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
      [ 1.531153] hub 5-0:1.0: USB hub found
      [ 1.534935] hub 5-0:1.0: 1 port detected
      [ 1.539087] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
      [ 1.544866] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
      [ 1.553312] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
      [ 1.614156] hub 6-0:1.0: USB hub found
      [ 1.617937] hub 6-0:1.0: 1 port detected
      [ 1.622175] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      [ 1.628733] ehci-pci: EHCI PCI platform driver
      [ 1.633239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      [ 1.639444] ohci-pci: OHCI PCI platform driver
      [ 1.644041] usbcore: registered new interface driver usb-storage
      [ 1.644782] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
      [ 1.656418] mousedev: PS/2 mouse device common for all mice
      [ 1.662322] i2c /dev entries driver
      [ 1.666426] IR NEC protocol handler initialized
      [ 1.670984] IR RC5(x/sz) protocol handler initialized
      [ 1.676059] IR RC6 protocol handler initialized
      [ 1.680609] IR JVC protocol handler initialized
      [ 1.681779] ata1.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
      [ 1.681782] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
      [ 1.698315] IR Sony protocol handler initialized
      [ 1.702948] IR SANYO protocol handler initialized
      [ 1.707667] IR Sharp protocol handler initialized
      [ 1.712384] IR MCE Keyboard/mouse protocol handler initialized
      [ 1.718231] IR XMP protocol handler initialized
      [ 1.723149] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
      [ 1.731311] brcmstb-cpufreq f03e257c.cpu_clk_div: registered
      [ 1.737188] sdhci: Secure Digital Host Controller Interface driver
      [ 1.743389] sdhci: Copyright(c) Pierre Ossman
      [ 1.747766] sdhci-pltfm: SDHCI platform and OF driver helper
      [ 1.754672] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
      [ 1.760791] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
      [ 1.796775] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
      [ 1.804427] usbcore: registered new interface driver usbhid
      [ 1.812033] usbhid: USB HID core driver
      [ 1.816359] NET: Registered protocol family 17
      [ 1.820959] Key type dns_resolver registered
      [ 1.825337] Registering SWP/SWPB emulation handler
      [ 1.835829] ALSA device list:
      [ 1.838812] No soundcards found.
      [ 1.884415] mmc0: MAN_BKOPS_EN bit is not set
      [ 1.895007] mmc0: new high speed MMC card at address 0001
      [ 1.900684] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
      [ 1.905300] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
      [ 1.911295] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
      [ 1.917277] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
      [ 1.926367] mmcblk0: p1 p2 p3 p4
      [ 1.929787] usb 5-1: new full-speed USB device number 2 using ohci-brcm
      [ 2.040065] ata1.00: configured for UDMA/133
      [ 2.044590] scsi 0:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
      [ 2.053193] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
      [ 2.053307] sd 0:0:0:0: Attached scsi generic sg0 type 0
      [ 2.066278] sd 0:0:0:0: [sda] 4096-byte physical blocks
      [ 2.071624] sd 0:0:0:0: [sda] Write Protect is off
      [ 2.076429] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
      [ 2.076476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
      DPO or FUA
      [ 2.100572] sda: sda1 sda2
      [ 2.103998] sd 0:0:0:0: [sda] Attached SCSI disk
      [ 2.168778] ata2: SATA link down (SStatus 0 SControl 300)
      [ 2.176549] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and
      O_DIRECT support!
      [ 2.191346] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: dat
      a=journal
      [ 2.200267] VFS: Mounted root (ext4 filesystem) on device 179:4.
      [ 2.207256] devtmpfs: mounted
      [ 2.210368] Freeing unused kernel memory: 308K (c0821000 - c086e000)
      [ 2.424051] udevd[685]: starting version 182
      [ 2.607575] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
      [ 2.659205] random: dd urandom read with 49 bits of entropy available
      [ 3.041877] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
      [ 3.073864] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommende
      d
      [ 3.082790] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
      [ 3.244290] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
      [ 3.302710] procmk_init
      [ 3.307285] bcm_event: module license 'Proprietary' taints kernel.
      [ 3.307294] Disabling lock debugging due to kernel taint
      [ 3.514032] nexus.ko: virtual irq: enabled (273)
      [ 3.514091] nexus.ko: shared gpio banks: enabled
      [ 5.284410] random: nonblocking pool is initialized
      [ 7.373977] DVB: registering new adapter (_vuplus_uno4k_)
      [ 7.722847] bcm7252s: hotplug_callback():
      [ 7.722847] Hotplug - status.connected 1:0:1
      [ 7.722865] bcm7252s: hotplug_callback():
      [ 7.722865] Hotplug - connecting HDMI to display 0xe
      [ 7.835802] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
      [ 7.856901] [MPVR]: >> misc_pvr_init
      [ 7.858229] [VID]: 6bcm7335_video_init
      [ 7.920133] [AUD]: 6bcm7335_audio_init
      [ 7.920318] [AUD]: >> bcm_audio_capture_init
      [ 7.923857] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d378c000 state=d
      256c000 config=bf69ebd8
      [ 7.937217] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.938283] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37ec800 state=d
      25f1800 config=bf69ebe0
      [ 7.947439] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.948385] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37ec000 state=d
      25f1000 config=bf69ebe8
      [ 7.957690] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.958628] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3793800 state=d
      25f5800 config=bf69ebf0
      [ 7.967718] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.968572] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3793000 state=d
      25f5000 config=bf69ebf8
      [ 7.977828] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.978719] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37e5800 state=d
      25f6800 config=bf69ec00
      [ 7.987924] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.988803] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37e5000 state=d
      25f6000 config=bf69ec08
      [ 7.998046] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.999215] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37e6800 state=d
      25fa800 config=bf69ec10
      [ 8.008783] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 8.009820] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9
      [ 8.027229] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
      [ 8.028340] BKNI_Malloc(linuxkernel) top users:
      [ 8.028340] blocks, bytes, filename:line
      [ 8.028348] 1205, 264868, BSEAV/lib/utils/balloc.c:31
      [ 8.048024] input: dreambox advanced remote control (native) as /devices/virtual/input/i
      nput0
      [ 8.051917] [LCD]: registered
      [ 8.411793] >>I2CDeviceInitialize
      [ 8.668809] [CI]: registered ci0
      [ 8.674542] [CI]: CI interface initialised
      [ 8.674542]
      [ 8.680824] [DFP]: registered dbox fp
      [ 8.684135] [SC]: registered sci0
      [ 10.124772] system_time_set wakeup mode get
      [ 10.184777] system_time_set wakeup mode get 0xc2
      [ 10.611078] [VID]: VIDEO_SET_STREAMTYPE 0
      [ 10.611090] [VID]: VIDEO_SELECT_SOURCE 1 0
      [ 10.611129] [VID]: VIDEO_PLAY 1 2 0
      [ 10.616454] [VID]: VIDEO_CONTINUE 1 1
      [ 10.616465] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      [ 10.837776] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
      [ 10.839626] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
      [ 10.891669] [VID]: VIDEO_STOP 0 1
      [ 10.912721] [VID]: VIDEO_SELECT_SOURCE 0 0
      [ 12.841871] bcmgenet f0b00000.ethernet eth0: Link is Down
      [ 13.492522] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/t
      x
      [ 16.636879] NET: Registered protocol family 10
      [ 18.366557] [VID]: VIDEO_SET_STREAMTYPE 0
      [ 18.366571] [VID]: VIDEO_SELECT_SOURCE 1 0
      [ 18.366611] [VID]: VIDEO_PLAY 1 2 0
      [ 18.371947] [VID]: VIDEO_CONTINUE 1 1
      [ 18.371954] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      [ 18.648389] [VID]: VIDEO_STOP 0 1
      [ 18.652279] [VID]: VIDEO_SELECT_SOURCE 0 0
      [ 28.489673] [AUD]: AUDIO_SET_MUTE 0
      [ 28.490184] [AUD]: AUDIO_SET_MIXER -768557424
      [ 28.490194] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
      [ 28.490198] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
      [ 28.490201] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      [ 28.853060] [AUD]: AUDIO_SET_MIXER -768557424
      [ 28.853073] [AUD]: AUDIO_SET_MIXER : amixl 48, amixr 48
      [ 28.853077] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      [ 28.853081] [AUD]: AUDIO_SET_MIXER : next left volume -3498, right volume -3498
      [ 31.725997] FE tune
      [ 32.142523] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      [ 32.154908] [AUD]: AUDIO_SELECT_SOURCE 0
      [ 32.154959] [AUD]: AUDIO_SET_BYPASS_MODE 0
      [ 32.154965] [AUD]: AC3 downmix 0 state : 0
      [ 32.154975] [AUD]: AUDIO_PAUSE 0
      [ 32.154983] [AUD]: AUDIO_PLAY 0 decoder start : 0
      [ 32.156119] [VID]: VIDEO_SELECT_SOURCE 0 0
      [ 32.156154] [VID]: VIDEO_SLOWMOTION 0 0
      [ 32.156166] [VID]: VIDEO_FAST_FORWARD 0 0 0
      [ 32.156174] [VID]: VIDEO_CONTINUE 0 0
      [ 32.156183] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd22aee80
      [ 32.156186] [AUD]: Mute : 0
      [ 32.156589] [AUD]: AUDIO_CHANNEL_SELECT 0
      [ 32.159827] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      [ 32.159836] [VID]: VIDEO_GET_SIZE aspect: 1 0
      [ 32.436147] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      [ 32.443260] [VID]: VIDEO_SLOWMOTION 0 1
      [ 32.443305] [VID]: VIDEO_FAST_FORWARD 0 1 0
      [ 32.443328] [VID]: VIDEO_CONTINUE 0 1
      [ 32.443339] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd22aee80
      [ 32.443343] [AUD]: Mute : 0
      [ 32.658647] FE tune
      [ 33.148390] FE tune
      [ 33.677467] FE tune
      [ 34.349431] FE tune
      [ 34.625420] BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080
      [ 34.627213] BKNI_Malloc(linuxkernel) top users:
      [ 34.627213] blocks, bytes, filename:line
      [ 34.627222] 2254, 480200, BSEAV/lib/utils/balloc.c:31
      root@vuuno4kse:~# dmesg
      [ 0.000000] Booting Linux on physical CPU 0x0
      [ 0.000000] Linux version 4.1.20-1.9 (plnick@build-plnick) (gcc version 4.9.2 (GCC) ) #1
      SMP Mon Nov 27 14:24:54 CET 2017
      [ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
      [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
      [ 0.000000] Machine model: UNO4KSE
      [ 0.000000] moving dtb from 0x0000000007628000 to 0x00000000008ecc2c
      [ 0.000000] bmem: Reserved 633 MiB at 0x0000000016600000
      [ 0.000000] bmem: Reserved 616 MiB at 0x0000000099700000
      [ 0.000000] cma: Reserved 16 MiB at 0x0000000098400000
      [ 0.000000] Forcing write-allocate cache policy for SMP
      [ 0.000000] Memory policy: Data cache writealloc
      [ 0.000000] On node 0 totalpages: 516096
      [ 0.000000] DMA zone: 700 pages used for memmap
      [ 0.000000] DMA zone: 0 pages reserved
      [ 0.000000] DMA zone: 89600 pages, LIFO batch:15
      [ 0.000000] HighMem zone: 426496 pages, LIFO batch:31
      [ 0.000000] PERCPU: Embedded 12 pages/cpu @d4dac000 s16896 r8192 d24064 u49152
      [ 0.000000] pcpu-alloc: s16896 r8192 d24064 u49152 alloc=12*4096
      [ 0.000000] pcpu-alloc: [0] 0 [0] 1
      [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515396
      [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=jour
      nal rootwait rw coherent_pool=2M vmalloc=658m bmem=633m@358m bmem=616m@2455m
      [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
      [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
      [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
      [ 0.000000] Memory: 741940K/2064384K available (6221K kernel code, 299K rwdata, 2068K ro
      data, 308K init, 199K bss, 1306060K reserved, 16384K cma-reserved, 409572K highmem)
      [ 0.000000] Virtual kernel memory layout:
      [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
      [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
      [ 0.000000] vmalloc : 0xd6000000 - 0xff000000 ( 656 MB)
      [ 0.000000] lowmem : 0xc0000000 - 0xd5e00000 ( 350 MB)
      [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
      [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
      [ 0.000000] .text : 0xc0008000 - 0xc0820bdc (8291 kB)
      [ 0.000000] .init : 0xc0821000 - 0xc086e000 ( 308 kB)
      [ 0.000000] .data : 0xc086e000 - 0xc08b8dd8 ( 300 kB)
      [ 0.000000] .bss : 0xc08bb000 - 0xc08ecc2c ( 200 kB)
      [ 0.000000] Hierarchical RCU implementation.
      [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
      [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
      [ 0.000000] NR_IRQS:16 nr_irqs:16 16
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd6002000, parent irq: 93)
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd6008000, parent irq: 64)
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd600aa00, parent irq: 65)
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd600c640, parent irq: 95)
      [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd600e200, parent irq: 58)
      [ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s):
      2)
      [ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd6010380, parent IRQ(s):
      3)
      [ 0.000000] MCP: Enabling write pairing
      [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
      [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3
      , max_idle_ns: 440795203123 ns
      [ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
      [ 0.000011] Switching to timer-based delay loop, resolution 37ns
      [ 0.000342] Calibrating delay loop (skipped), value calculated using timer frequency.. 5
      4.00 BogoMIPS (lpj=27000)
      [ 0.000353] pid_max: default: 32768 minimum: 301
      [ 0.000450] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
      [ 0.000455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
      [ 0.000892] CPU: Testing write buffer coherency: ok
      [ 0.001104] CPU0: update cpu_capacity 1024
      [ 0.001109] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
      [ 0.001321] Setting up static identity map for 0x8480 - 0x84d8
      [ 0.003860] CPU1: update cpu_capacity 1024
      [ 0.003864] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
      [ 0.003922] Brought up 2 CPUs
      [ 0.003932] SMP: Total of 2 processors activated (108.00 BogoMIPS).
      [ 0.003936] CPU: All CPU(s) started in SVC mode.
      [ 0.004284] devtmpfs: initialized
      [ 0.013286] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
      [ 0.013505] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1
      911260446275000 ns
      [ 0.014714] NET: Registered protocol family 16
      [ 0.016163] DMA: preallocated 2048 KiB pool for atomic coherent allocations
      [ 0.023121] cpuidle: using governor ladder
      [ 0.029135] cpuidle: using governor menu
      [ 0.036082] No ATAGs?
      [ 0.036111] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
      [ 0.036118] hw-breakpoint: maximum watchpoint size is 8 bytes.
      [ 0.036348] Broadcom Brahma-B15 readahead cache at: 0xd6314478
      [ 0.048092] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
      [ 0.048311] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
      [ 0.048705] SCSI subsystem initialized
      [ 0.048858] libata version 3.00 loaded.
      [ 0.049060] usbcore: registered new interface driver usbfs
      [ 0.049101] usbcore: registered new interface driver hub
      [ 0.049156] usbcore: registered new device driver usb
      [ 0.049223] Linux video capture interface: v2.00
      [ 0.049294] pps_core: LinuxPPS API ver. 1 registered
      [ 0.049299] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giomet
      ti@linux.it>
      [ 0.049320] PTP clock support registered
      [ 0.049726] Advanced Linux Sound Architecture Driver Initialized.
      [ 0.050769] Switched to clocksource arch_sys_counter
      [ 0.050981] FS-Cache: Loaded
      [ 0.052515] thermal thermal_zone0: failed to read out thermal zone (-22)
      [ 0.052609] NET: Registered protocol family 2
      [ 0.053086] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
      [ 0.053111] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
      [ 0.053152] TCP: Hash tables configured (established 4096 bind 4096)
      [ 0.053228] UDP hash table entries: 256 (order: 1, 8192 bytes)
      [ 0.053243] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
      [ 0.053379] NET: Registered protocol family 1
      [ 0.053602] RPC: Registered named UNIX socket transport module.
      [ 0.053606] RPC: Registered udp transport module.
      [ 0.053609] RPC: Registered tcp transport module.
      [ 0.053612] RPC: Registered tcp NFSv4.1 backchannel transport module.
      [ 0.053625] PCI: CLS 0 bytes, default 64
      [ 0.053943] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
      [ 0.053973] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters availabl
      e
      [ 0.054711] futex hash table entries: 512 (order: 3, 32768 bytes)
      [ 0.055911] NFS: Registering the id_resolver key type
      [ 0.055944] Key type id_resolver registered
      [ 0.055950] Key type id_legacy registered
      [ 0.055964] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
      [ 0.055971] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
      [ 0.056980] bounce: pool size: 64 pages
      [ 0.057026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
      [ 0.057037] io scheduler noop registered
      [ 0.057044] io scheduler deadline registered
      [ 0.057065] io scheduler cfq registered (default)
      [ 0.057301] brcm-gisb-arb f0400000.gisb-arb: registered mem: d633c000, irqs: 261, 262
      [ 0.058054] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
      [ 0.058443] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
      [ 0.058491] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
      [ 0.158629] brcm-pci f0460000.pcie: link down
      [ 0.158682] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
      [ 0.158721] brcm-pci f0490000.pcie: no identity map; PCI drivers may fail
      [ 0.258853] brcm-pci f0490000.pcie: link down
      [ 0.260210] brcmstb_memc f1102000.memc-ddr: registered
      [ 0.260250] brcmstb_memc f1182000.memc-ddr: registered
      [ 0.260439] brcm-waketimer f0417580.waketimer: registered, with irq 263
      [ 0.260652] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
      [ 0.261813] console [ttyS0] disabled
      [ 0.261838] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) i
      s a 16550A
      [ 0.993275] console [ttyS0] enabled
      [ 0.997101] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) i
      s a 16550A
      [ 1.006347] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) i
      s a 16550A
      [ 1.018670] loop: module loaded
      [ 1.022660] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 0
      [ 1.029224] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 1
      [ 1.035797] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM
      [ 1.043210] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
      [ 1.049254] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
      [ 1.066784] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl pla
      tform mode
      [ 1.075768] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
      [ 1.085455] scsi host0: brcm-ahci
      [ 1.089022] scsi host1: brcm-ahci
      [ 1.092500] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
      [ 1.100434] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
      [ 1.108371] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
      [ 1.115518] brcmstb_qspi f03e3400.spi: using bspi-mspi mode
      [ 1.121158] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found
      [ 1.127195] brcmstb_qspi: probe of f03e3400.spi failed with error -22
      [ 1.133674] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode
      [ 1.139844] m25p80 spi32766.0: found mx25l3255e, expected m25p80
      [ 1.145869] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
      [ 1.151126] 5 ofpart partitions found on MTD device spi32766.0
      [ 1.156969] Creating 5 MTD partitions on "spi32766.0":
      [ 1.162119] 0x000000000000-0x000000200000 : "flash0.bolt"
      [ 1.168039] 0x000000200000-0x000000210000 : "flash0.macadr"
      [ 1.174057] 0x000000210000-0x000000220000 : "flash0.nvram"
      [ 1.179985] 0x000000220000-0x000000230000 : "flash0.devtree"
      [ 1.186072] 0x000000000000-0x000000400000 : "flash0"
      [ 1.192103] libphy: Fixed MDIO Bus: probed
      [ 1.196623] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
      [ 1.202518] bcmgenet f0b00000.ethernet: failed to get enet-mux clock
      [ 1.221767] libphy: bcmgenet MII bus: probed
      [ 1.246589] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
      [ 1.252441] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
      [ 1.258564] xhci-brcm: xHCI BRCM driver
      [ 1.277262] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
      [ 1.283047] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
      [ 1.291167] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0
      x00010090
      [ 1.300076] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
      [ 1.306714] hub 1-0:1.0: USB hub found
      [ 1.310502] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
      [ 1.317776] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
      [ 1.323541] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
      [ 1.331433] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
      [ 1.339884] hub 2-0:1.0: USB hub found
      [ 1.343664] hub 2-0:1.0: 2 ports detected
      [ 1.348056] ehci-brcm: EHCI BRCM driver
      [ 1.352024] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
      [ 1.357813] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
      [ 1.375820] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
      [ 1.387776] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
      [ 1.394364] hub 3-0:1.0: USB hub found
      [ 1.398142] hub 3-0:1.0: 1 port detected
      [ 1.402322] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
      [ 1.408086] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
      [ 1.426049] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
      [ 1.437775] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
      [ 1.444341] hub 4-0:1.0: USB hub found
      [ 1.448201] hub 4-0:1.0: 1 port detected
      [ 1.452423] ohci-brcm: OHCI BRCM driver
      [ 1.456371] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
      [ 1.462147] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
      [ 1.470074] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
      [ 1.531153] hub 5-0:1.0: USB hub found
      [ 1.534935] hub 5-0:1.0: 1 port detected
      [ 1.539087] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
      [ 1.544866] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
      [ 1.553312] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
      [ 1.614156] hub 6-0:1.0: USB hub found
      [ 1.617937] hub 6-0:1.0: 1 port detected
      [ 1.622175] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      [ 1.628733] ehci-pci: EHCI PCI platform driver
      [ 1.633239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      [ 1.639444] ohci-pci: OHCI PCI platform driver
      [ 1.644041] usbcore: registered new interface driver usb-storage
      [ 1.644782] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
      [ 1.656418] mousedev: PS/2 mouse device common for all mice
      [ 1.662322] i2c /dev entries driver
      [ 1.666426] IR NEC protocol handler initialized
      [ 1.670984] IR RC5(x/sz) protocol handler initialized
      [ 1.676059] IR RC6 protocol handler initialized
      [ 1.680609] IR JVC protocol handler initialized
      [ 1.681779] ata1.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
      [ 1.681782] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
      [ 1.698315] IR Sony protocol handler initialized
      [ 1.702948] IR SANYO protocol handler initialized
      [ 1.707667] IR Sharp protocol handler initialized
      [ 1.712384] IR MCE Keyboard/mouse protocol handler initialized
      [ 1.718231] IR XMP protocol handler initialized
      [ 1.723149] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
      [ 1.731311] brcmstb-cpufreq f03e257c.cpu_clk_div: registered
      [ 1.737188] sdhci: Secure Digital Host Controller Interface driver
      [ 1.743389] sdhci: Copyright(c) Pierre Ossman
      [ 1.747766] sdhci-pltfm: SDHCI platform and OF driver helper
      [ 1.754672] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
      [ 1.760791] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
      [ 1.796775] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
      [ 1.804427] usbcore: registered new interface driver usbhid
      [ 1.812033] usbhid: USB HID core driver
      [ 1.816359] NET: Registered protocol family 17
      [ 1.820959] Key type dns_resolver registered
      [ 1.825337] Registering SWP/SWPB emulation handler
      [ 1.835829] ALSA device list:
      [ 1.838812] No soundcards found.
      [ 1.884415] mmc0: MAN_BKOPS_EN bit is not set
      [ 1.895007] mmc0: new high speed MMC card at address 0001
      [ 1.900684] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
      [ 1.905300] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
      [ 1.911295] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
      [ 1.917277] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
      [ 1.926367] mmcblk0: p1 p2 p3 p4
      [ 1.929787] usb 5-1: new full-speed USB device number 2 using ohci-brcm
      [ 2.040065] ata1.00: configured for UDMA/133
      [ 2.044590] scsi 0:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
      [ 2.053193] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
      [ 2.053307] sd 0:0:0:0: Attached scsi generic sg0 type 0
      [ 2.066278] sd 0:0:0:0: [sda] 4096-byte physical blocks
      [ 2.071624] sd 0:0:0:0: [sda] Write Protect is off
      [ 2.076429] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
      [ 2.076476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
      DPO or FUA
      [ 2.100572] sda: sda1 sda2
      [ 2.103998] sd 0:0:0:0: [sda] Attached SCSI disk
      [ 2.168778] ata2: SATA link down (SStatus 0 SControl 300)
      [ 2.176549] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and
      O_DIRECT support!
      [ 2.191346] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: dat
      a=journal
      [ 2.200267] VFS: Mounted root (ext4 filesystem) on device 179:4.
      [ 2.207256] devtmpfs: mounted
      [ 2.210368] Freeing unused kernel memory: 308K (c0821000 - c086e000)
      [ 2.424051] udevd[685]: starting version 182
      [ 2.607575] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
      [ 2.659205] random: dd urandom read with 49 bits of entropy available
      [ 3.041877] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
      [ 3.073864] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommende
      d
      [ 3.082790] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
      [ 3.244290] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
      [ 3.302710] procmk_init
      [ 3.307285] bcm_event: module license 'Proprietary' taints kernel.
      [ 3.307294] Disabling lock debugging due to kernel taint
      [ 3.514032] nexus.ko: virtual irq: enabled (273)
      [ 3.514091] nexus.ko: shared gpio banks: enabled
      [ 5.284410] random: nonblocking pool is initialized
      [ 7.373977] DVB: registering new adapter (_vuplus_uno4k_)
      [ 7.722847] bcm7252s: hotplug_callback():
      [ 7.722847] Hotplug - status.connected 1:0:1
      [ 7.722865] bcm7252s: hotplug_callback():
      [ 7.722865] Hotplug - connecting HDMI to display 0xe
      [ 7.835802] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
      [ 7.856901] [MPVR]: >> misc_pvr_init
      [ 7.858229] [VID]: 6bcm7335_video_init
      [ 7.920133] [AUD]: 6bcm7335_audio_init
      [ 7.920318] [AUD]: >> bcm_audio_capture_init
      [ 7.923857] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d378c000 state=d
      256c000 config=bf69ebd8
      [ 7.937217] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.938283] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37ec800 state=d
      25f1800 config=bf69ebe0
      [ 7.947439] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.948385] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37ec000 state=d
      25f1000 config=bf69ebe8
      [ 7.957690] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.958628] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3793800 state=d
      25f5800 config=bf69ebf0
      [ 7.967718] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.968572] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3793000 state=d
      25f5000 config=bf69ebf8
      [ 7.977828] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.978719] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37e5800 state=d
      25f6800 config=bf69ec00
      [ 7.987924] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.988803] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37e5000 state=d
      25f6000 config=bf69ec08
      [ 7.998046] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 7.999215] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d37e6800 state=d
      25fa800 config=bf69ec10
      [ 8.008783] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      [ 8.009820] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9
      [ 8.027229] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
      [ 8.028340] BKNI_Malloc(linuxkernel) top users:
      [ 8.028340] blocks, bytes, filename:line
      [ 8.028348] 1205, 264868, BSEAV/lib/utils/balloc.c:31
      [ 8.048024] input: dreambox advanced remote control (native) as /devices/virtual/input/i
      nput0
      [ 8.051917] [LCD]: registered
      [ 8.411793] >>I2CDeviceInitialize
      [ 8.668809] [CI]: registered ci0
      [ 8.674542] [CI]: CI interface initialised
      [ 8.674542]
      [ 8.680824] [DFP]: registered dbox fp
      [ 8.684135] [SC]: registered sci0
      [ 10.124772] system_time_set wakeup mode get
      [ 10.184777] system_time_set wakeup mode get 0xc2
      [ 10.611078] [VID]: VIDEO_SET_STREAMTYPE 0
      [ 10.611090] [VID]: VIDEO_SELECT_SOURCE 1 0
      [ 10.611129] [VID]: VIDEO_PLAY 1 2 0
      [ 10.616454] [VID]: VIDEO_CONTINUE 1 1
      [ 10.616465] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      [ 10.837776] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
      [ 10.839626] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
      [ 10.891669] [VID]: VIDEO_STOP 0 1
      [ 10.912721] [VID]: VIDEO_SELECT_SOURCE 0 0
      [ 12.841871] bcmgenet f0b00000.ethernet eth0: Link is Down
      [ 13.492522] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/t
      x
      [ 16.636879] NET: Registered protocol family 10
      [ 18.366557] [VID]: VIDEO_SET_STREAMTYPE 0
      [ 18.366571] [VID]: VIDEO_SELECT_SOURCE 1 0
      [ 18.366611] [VID]: VIDEO_PLAY 1 2 0
      [ 18.371947] [VID]: VIDEO_CONTINUE 1 1
      [ 18.371954] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      [ 18.648389] [VID]: VIDEO_STOP 0 1
      [ 18.652279] [VID]: VIDEO_SELECT_SOURCE 0 0
      [ 28.489673] [AUD]: AUDIO_SET_MUTE 0
      [ 28.490184] [AUD]: AUDIO_SET_MIXER -768557424
      [ 28.490194] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
      [ 28.490198] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
      [ 28.490201] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      [ 28.853060] [AUD]: AUDIO_SET_MIXER -768557424
      [ 28.853073] [AUD]: AUDIO_SET_MIXER : amixl 48, amixr 48
      [ 28.853077] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      [ 28.853081] [AUD]: AUDIO_SET_MIXER : next left volume -3498, right volume -3498
      [ 31.725997] FE tune
      [ 32.142523] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      [ 32.154908] [AUD]: AUDIO_SELECT_SOURCE 0
      [ 32.154959] [AUD]: AUDIO_SET_BYPASS_MODE 0
      [ 32.154965] [AUD]: AC3 downmix 0 state : 0
      [ 32.154975] [AUD]: AUDIO_PAUSE 0
      [ 32.154983] [AUD]: AUDIO_PLAY 0 decoder start : 0
      [ 32.156119] [VID]: VIDEO_SELECT_SOURCE 0 0
      [ 32.156154] [VID]: VIDEO_SLOWMOTION 0 0
      [ 32.156166] [VID]: VIDEO_FAST_FORWARD 0 0 0
      [ 32.156174] [VID]: VIDEO_CONTINUE 0 0
      [ 32.156183] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd22aee80
      [ 32.156186] [AUD]: Mute : 0
      [ 32.156589] [AUD]: AUDIO_CHANNEL_SELECT 0
      [ 32.159827] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
      [ 32.159836] [VID]: VIDEO_GET_SIZE aspect: 1 0
      [ 32.436147] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      [ 32.443260] [VID]: VIDEO_SLOWMOTION 0 1
      [ 32.443305] [VID]: VIDEO_FAST_FORWARD 0 1 0
      [ 32.443328] [VID]: VIDEO_CONTINUE 0 1
      [ 32.443339] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd22aee80
      [ 32.443343] [AUD]: Mute : 0
      [ 32.658647] FE tune
      [ 33.148390] FE tune
      [ 33.677467] FE tune
      [ 34.349431] FE tune
      [ 34.625420] BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080
      [ 34.627213] BKNI_Malloc(linuxkernel) top users:
      [ 34.627213] blocks, bytes, filename:line
      [ 34.627222] 2254, 480200, BSEAV/lib/utils/balloc.c:31
      [ 440.651828] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      [ 440.659072] [VID]: VIDEO_SLOWMOTION 0 1
      [ 440.659118] [VID]: VIDEO_FAST_FORWARD 0 1 0
      [ 440.659142] [VID]: VIDEO_CONTINUE 0 1
      [ 440.659154] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd22aee80
      [ 440.659158] [AUD]: Mute : 0
      root@vuuno4kse:~#

    • sieht so aus als ob du nen nodemcu mit CH340 chipsatz hast - dafür fehlt im Moment noch das Kernel Module am Feed

      entweder warten bis es am Feed liegt oder aber zurückschicken und eine nodemcu mit cp210x chipsatz bestellen - dafür liegt das kernel module am feed der uno4kse
      VMC
      EPG Share
      VU Alexa Skill
      Fluid Next
      Global Search

      Spenden sind immer herzlich willkommen... einfach hier klicken und das ganze an sbeatz76@googlemail.com schicken

    • so danke für die info nochmal neue nodemcu mit cp2102 ist bestellt !

    • Wenn es inzwischen für die Uno4kSE da ist, liegt das Kernelmodul für die cp210x nodeMCU inzwischen auch auf dem Feed für die Uno 4k?
      Wenn ja welches ist es denn? cdc-acm? cdc-ncm?

    • Sollte der ACM sein.

      @all !! warum gibts denn keine Treiber für den ch340 chip ?? Habe inzwischen gelesen das die Treiber ab 2.6 im Linuxkernel drin sein sollen .

    • NEIN...
      es ist kernel-module-cp210x

      warum es das kernel modul für ch340/341 noch nicht gibt? weil bisher keiner danach gefragt hat! nur weil es das gibt heisst das doch nicht dass man es auch automatisch mitbauen muss...
      VMC
      EPG Share
      VU Alexa Skill
      Fluid Next
      Global Search

      Spenden sind immer herzlich willkommen... einfach hier klicken und das ganze an sbeatz76@googlemail.com schicken

    • @hmmmdada
      Gibt es schon einen ungefähren Releasetermin, damit die LEDs mit dem NodeMCU auch über WLAN funktionieren?

      Bei mir hängt so ein blödes USB-Kabel vom TV runter was optisch echt kacke bei ins aussieht. Der Rest ist nämlich alles unter Putz. :crazy3:

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von DJFlaxi ()

    • so ich nehme alles zurück ,hab doch noch den Treiber gefunden kann weiter basteln. Die anderen Teile zu früh bestellt. Bin immer zu ungeduldig.

    • Shelli schrieb:


      Die Error entstehen jeweils beim Umschalten auf ein DVT2-Signal. Das Backlight geht dann aus, sobald man wieder einen SAT-Kanal wählt geht es wieder an.
      Interessant auch das auch Aufnahmen die mit DVBT2 gemacht wurden nicht funktionieren, SAT-Aufnahmen dann wieder schon.


      Log von enigmalight hier
      Würde es helfen wenn ich eine kurze DVT2-Aufnahme zur Verfügung stelle, mit der der Grabber scheinbar nicht kann?
      DVBT2 nutzt den HEVC-Codec, liegt es daran?
      Aber das tun 4K-Filme auch und die sollen ja gehen.

    • @ hmmmdada: Fettes Danke an Dich für das anpassen. Spendier Dir nächste ANGA Nachbesprechung gerne ein paar Bier :)
      Und ich vermute mal das "HDMI in" nicht gehen kann weil es gar nicht "grabbbar ist" innerhlab der Box, oder ?

      Und für alle die es interessiert im Anhang ein mp4 Video wie das ganze mit 4x Fussball auf der Uno 4k SE so aussehen kann.
      Einfach genial und das mit "nur" 8 Kanal Karatelight.

      Das einrichten war aber tatsächlich ein wenig tricky und insgesamt ist es noch nicht "plug and Play".
      ich habe einen ganzen Tag dran verbracht weil das Thread doch auch ganz schön lang geworden ist und der Hinweis auf das nachinstallieren des CDC-ACM im ersten Posting ca. 3h gespart hätte :)

      Das Plugin von hmmmdada ist perfekt, es stimmen aber die Farben nicht mit der Konfig über ein bzw. wenn es über die Gui konfiguriert wird werden die Daten ignoriert.
      Das lässt sich aber ja durch manuelles handanlegen in der Config rundziehen und das macht man ja auch nur einmal.
      Dafür ist es 100% synchron.

      Das "andere release 0.40" passt ( nur bei mir?) gar nicht.
      Die Farben stimmen darin zwar (via Gui Konfig), dafür ist es aber vollkommen asynchron zum Bildinhalt.

      Ich bin ich voll zufrieden mit dem Ergebnis und kann es nur jedem empfehlen.
      Dateien
      is there a live without dreams ? I´m sure !!!

    • elektronikfreak schrieb:



      Das "andere release 0.40" passt ( nur bei mir?) gar nicht.
      Die Farben stimmen darin zwar (via Gui Konfig), dafür ist es aber vollkommen asynchron zum Bildinhalt.
      Kann ich nicht bestätigen, selbst bei Binary "original" laufen die Lichter gut, man kann einen Farbabgleich machen, einzig UHD läuft nicht.
      Somit habe ich auch auf die hmmmdata binary umgestellt (Farbreihenfolge muss angepasst werden) wegen UHD. Aber synchron laufen hier beide!
      Gr hm

    • Kleine Rückinfo:

      Ich hab auf sedulight zurückgerüstet, hmmmdadas ipk installiert, enigmalight geöffnet, config erstellt, fertig. Läuft

      Ich muß nur noch die Feinjustierung machen.

      Wirklich super. Jetzt hab ich nen Raspi über zum Spielen :))

      Besten Dank an alle Beteiligten.
      Hard-Software
      2x VU+ Solo4k
      VU+ Zero
      Samsung UE65JU7090 4kUHD
      Teufel Impaq 7300M
      Samsung SPF-107h
      Netatmo
      HD+ HD02
      Hyperion
      -------------------------
      VTi 11.0.x
      Fluid Skin
      VMC
      AutomaticFullBackup
      Serienrecorder
      Netatmo
      LCD4Linux
      MQB
      EMC
      OScam 1.20 rev: 11277
      OscamButler

      Use Filebot!

    • hmmmdada schrieb:

      ich kann da nicht helfen, du nutzt die Dima-Version...
      Ok. Habe jetzt wieder auf deine Version umgerüstet und siehe da damit geht es auch mit DVBT2-Quellen.
      Das ist gut, leider sind jetzt aber wie bekannt die Farben Rot und Blau vertauscht.
      Was in der /etc/enigmalight.conf steht ist im Netzbetrieb für die Pi egal, was ja auch Sinn macht da nur die Grabber-Images an die Pi gehen.
      Korrigiert habe ich das indem ich in der Hyperion-Config auf der PI in der device-Section die colororder auf brg statt rbg gesetzt habe (also rot und blau vertauscht).
      Damit stimmen zwar die Farben in der Hyperion-App (Colorwheel und Effekte) nicht mehr, aber damit kann ich leben.
      Das Backlight passt aber jetzt super zum Bild der VU.

      Warum Hyperion die Farben aus den Images anders interpretiert, die Images sehen nämlich gut aus wenn man sie nach /temp raus schreiben lässt, verstehe ich allerdings nicht.

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von Shelli ()

    • Ist es normal, dass das Ambilight bei VMC nicht funktioniert? Wäre echt schade.
      Hard-Software
      2x VU+ Solo4k
      VU+ Zero
      Samsung UE65JU7090 4kUHD
      Teufel Impaq 7300M
      Samsung SPF-107h
      Netatmo
      HD+ HD02
      Hyperion
      -------------------------
      VTi 11.0.x
      Fluid Skin
      VMC
      AutomaticFullBackup
      Serienrecorder
      Netatmo
      LCD4Linux
      MQB
      EMC
      OScam 1.20 rev: 11277
      OscamButler

      Use Filebot!

    • elektronikfreak schrieb:

      Und ich vermute mal das "HDMI in" nicht gehen kann weil es gar nicht "grabbbar ist" innerhlab der Box, oder ?
      hast du es probiert? Und falls ja mit was hast du die VU+ gefüttert?
      Was macht das Ambilight wenn du auf den HDMI IN umschaltest?

      Überlege von meiner VU+ UNO 4K auf die SE zu upgraden. Wenn das Enigmalight auch funktioniert, wenn man den HDMI Eingang "durchschleift" wäre das natürlich der hammer!

      Gruß FV

    • ich hätte da einr Frage die vielleicht nicht direkt mit Ambilight zu tun hat....
      kann mir jemand sagen welche datei für den start / stop des ambilights zuständig ist ?

      ich habe mein netzteil für die leds an einer 433mhz funksteckdose hängen damit das netzteil nicht 24h laufen muss.

      im moment steuer ich diese per webinterface meines fhem-server (raspberry mit 433mhz sendemodul).

      Schön wäre es wenn das plugin die seite / befehl direkt an den fhem server beim ein. bzw. ausschalten würde....

      hat da jemand eine idee wo ich es einbauen kann ?