[Erledigt] Asus USB-N13 N300 Welche treiber?

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • [Erledigt] Asus USB-N13 N300 Welche treiber?

    Hallo!

    Habe ausversehen mit vti zero die wlan unterstützung gelöscht... und wollte jetzt den o.g. Stick verwenden leider wird er nicht erkannt und ich weis leider nicht welches modul ich aus dem Feed installieren soll um den zum laufen zu bringen...

    Danke im Voraus

  • Solltest schon auch schreiben, was du jetzt gemacht hast; dass der Stick nicht erkannt wird, hast du ja schon im ersten Post geschrieben. Kernel-Modul installiert? Mit VTi-Zero wiederhergestellt? Box und nicht nur GUI neugestartet?
    Diskutiere nie mit einem Idioten. Er zieht dich auf sein Niveau runter und schlägt dich mit seiner Erfahrung.

  • Dann poste mal die Ausgabe des Befehls "dmesg" (oder die Datei /var/log/messages), wenn du den Stick einmal abziehst und wieder ansteckst. Bitte auch die Ausgabe des Befehls "lsmod" und des Befehls "lsusb" bei aufgestecktem Stick. Und bitte in Spoilern verpackt posten ;)
    Diskutiere nie mit einem Idioten. Er zieht dich auf sein Niveau runter und schlägt dich mit seiner Erfahrung.

  • Habe es jetzt zusätzlich auf der Zero probiert leider auch ohne erfolg...

    Spoiler anzeigen

    Module Size Used by
    ipv6 342617 14
    fpga_directc 493 0
    brcmfb 1590 2
    dvb_bcm7362 6646640 18 brcmfb
    rtl8192cu 91869 0
    rtl_usb 13400 1 rtl8192cu
    rtlwifi 72929 2 rtl_usb,rtl8192cu
    rtl8192c_common 53081 1 rtl8192cu
    mac80211 304997 3 rtl_usb,rtlwifi,rtl8192cu


    Spoiler anzeigen

    root@vuzero:~# lsusb
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 003: ID 0b05:17ab ASUSTek Computer, Inc. USB-N13 802.11n Network
    Adapter (rev. B1) [Realtek RTL8192CU]
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


    Spoiler anzeigen

    Jan 1 01:00:13 vuzero syslog.info syslogd started: BusyBox v1.23.2
    Jan 1 01:00:13 vuzero user.notice kernel: klogd started: BusyBox v1.23.2 (2016-11-27 15:56:38 CET)
    Jan 1 01:00:13 vuzero user.notice kernel: Linux version 3.13.5 (plnick@build-plnick) (gcc version 4.9.2 (GCC) ) #1 SMP Sun Nov 27 17:22:27 CET 2016
    Jan 1 01:00:13 vuzero user.info kernel: Fetching vars from bootloader... found 16 vars.
    Jan 1 01:00:13 vuzero user.info kernel: Options: moca=0 sata=1 pcie=0 usb=1
    Jan 1 01:00:13 vuzero user.info kernel: Using 512 MB + 0 MB RAM (from CFE)
    Jan 1 01:00:13 vuzero user.info kernel: bootconsole [early0] enabled
    Jan 1 01:00:13 vuzero user.info kernel: CPU0 revision is: 0002a065 (Broadcom BMIPS4380)
    Jan 1 01:00:13 vuzero user.info kernel: FPU revision is: 00130001
    Jan 1 01:00:13 vuzero user.info kernel: Determined physical RAM map:
    Jan 1 01:00:13 vuzero user.info kernel: memory: 10000000 @ 00000000 (usable)
    Jan 1 01:00:13 vuzero user.info kernel: memory: 10000000 @ 20000000 (usable)
    Jan 1 01:00:13 vuzero user.debug kernel: bmem: adding 56 MB LINUX region at 7 MB (0x03832000@0x007ce000)
    Jan 1 01:00:13 vuzero user.info kernel: bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
    Jan 1 01:00:13 vuzero user.debug kernel: bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000)
    Jan 1 01:00:13 vuzero user.warn kernel: Zone ranges:
    Jan 1 01:00:13 vuzero user.warn kernel: Normal [mem 0x00000000-0x2fffffff]
    Jan 1 01:00:13 vuzero user.warn kernel: Movable zone start for each node
    Jan 1 01:00:13 vuzero user.warn kernel: Early memory node ranges
    Jan 1 01:00:13 vuzero user.warn kernel: node 0: [mem 0x00000000-0x0fffffff]
    Jan 1 01:00:13 vuzero user.warn kernel: node 0: [mem 0x20000000-0x2fffffff]
    Jan 1 01:00:13 vuzero user.debug kernel: On node 0 totalpages: 131072
    Jan 1 01:00:13 vuzero user.debug kernel: Normal zone: 1024 pages used for memmap
    Jan 1 01:00:13 vuzero user.debug kernel: Normal zone: 0 pages reserved
    Jan 1 01:00:13 vuzero user.debug kernel: Normal zone: 131072 pages, LIFO batch:31
    Jan 1 01:00:13 vuzero user.warn kernel: Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
    Jan 1 01:00:13 vuzero user.warn kernel: Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
    Jan 1 01:00:13 vuzero user.info kernel: PERCPU: Embedded 7 pages/cpu @81407000 s7168 r8192 d13312 u32768
    Jan 1 01:00:13 vuzero user.debug kernel: pcpu-alloc: s7168 r8192 d13312 u32768 alloc=8*4096
    Jan 1 01:00:13 vuzero user.debug kernel: pcpu-alloc: [0] 0 [0] 1
    Jan 1 01:00:13 vuzero user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
    Jan 1 01:00:13 vuzero user.notice kernel: Kernel command line: ubiroot rootflags=sync bmem=192M@64M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs libata.force=1:1.5Gbps
    Jan 1 01:00:13 vuzero user.info kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
    Jan 1 01:00:13 vuzero user.info kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Jan 1 01:00:13 vuzero user.info kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Jan 1 01:00:13 vuzero user.warn kernel: Memory: 315104K/524288K available (6108K kernel code, 319K rwdata, 1224K rodata, 204K init, 116K bss, 209184K reserved)
    Jan 1 01:00:13 vuzero user.info kernel: Hierarchical RCU implementation.
    Jan 1 01:00:13 vuzero user.info kernel: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    Jan 1 01:00:13 vuzero user.info kernel: NR_IRQS:160
    Jan 1 01:00:13 vuzero user.info kernel: Measuring MIPS counter frequency...
    Jan 1 01:00:13 vuzero user.info kernel: Detected MIPS clock frequency: 751 MHz (375.759 MHz counter)
    Jan 1 01:00:13 vuzero user.info kernel: Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
    Jan 1 01:00:13 vuzero user.info kernel: pid_max: default: 32768 minimum: 301
    Jan 1 01:00:13 vuzero user.info kernel: Mount-cache hash table entries: 512
    Jan 1 01:00:13 vuzero user.info kernel: SMP: Booting CPU1...
    Jan 1 01:00:13 vuzero user.info kernel: CPU1 revision is: 0002a065 (Broadcom BMIPS4380)
    Jan 1 01:00:13 vuzero user.info kernel: FPU revision is: 00130001
    Jan 1 01:00:13 vuzero user.warn kernel: Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
    Jan 1 01:00:13 vuzero user.warn kernel: Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
    Jan 1 01:00:13 vuzero user.info kernel: SMP: CPU1 is running
    Jan 1 01:00:13 vuzero user.info kernel: Brought up 2 CPUs
    Jan 1 01:00:13 vuzero user.info kernel: devtmpfs: initialized
    Jan 1 01:00:13 vuzero user.info kernel: NET: Registered protocol family 16
    Jan 1 01:00:13 vuzero user.info kernel: USB0: power enable is active high; overcurrent is active low
    Jan 1 01:00:13 vuzero user.info kernel: bio: create slab <bio-0> at 0
    Jan 1 01:00:13 vuzero user.notice kernel: SCSI subsystem initialized
    Jan 1 01:00:13 vuzero user.debug kernel: libata version 3.00 loaded.
    Jan 1 01:00:13 vuzero user.info kernel: usbcore: registered new interface driver usbfs
    Jan 1 01:00:13 vuzero user.info kernel: usbcore: registered new interface driver hub
    Jan 1 01:00:13 vuzero user.info kernel: usbcore: registered new device driver usb
    Jan 1 01:00:13 vuzero user.info kernel: Linux video capture interface: v2.00
    Jan 1 01:00:13 vuzero user.info kernel: Advanced Linux Sound Architecture Driver Initialized.
    Jan 1 01:00:13 vuzero user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
    Jan 1 01:00:13 vuzero user.info kernel: Switched to clocksource wktmr
    Jan 1 01:00:13 vuzero user.notice kernel: FS-Cache: Loaded
    Jan 1 01:00:13 vuzero user.info kernel: NET: Registered protocol family 2
    Jan 1 01:00:13 vuzero user.info kernel: TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    Jan 1 01:00:13 vuzero user.info kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 1 01:00:13 vuzero user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
    Jan 1 01:00:13 vuzero user.info kernel: TCP: reno registered
    Jan 1 01:00:13 vuzero user.info kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
    Jan 1 01:00:13 vuzero user.info kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    Jan 1 01:00:13 vuzero user.info kernel: NET: Registered protocol family 1
    Jan 1 01:00:13 vuzero user.info kernel: RPC: Registered named UNIX socket transport module.
    Jan 1 01:00:13 vuzero user.info kernel: RPC: Registered udp transport module.
    Jan 1 01:00:13 vuzero user.info kernel: RPC: Registered tcp transport module.
    Jan 1 01:00:13 vuzero user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Jan 1 01:00:13 vuzero user.notice kernel: NFS: Registering the id_resolver key type
    Jan 1 01:00:13 vuzero user.notice kernel: Key type id_resolver registered
    Jan 1 01:00:13 vuzero user.notice kernel: Key type id_legacy registered
    Jan 1 01:00:13 vuzero user.info kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    Jan 1 01:00:13 vuzero user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Jan 1 01:00:13 vuzero user.info kernel: msgmni has been set to 615
    Jan 1 01:00:13 vuzero user.info kernel: io scheduler noop registered
    Jan 1 01:00:13 vuzero user.info kernel: io scheduler cfq registered (default)
    Jan 1 01:00:13 vuzero user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 1 01:00:13 vuzero user.info kernel: serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
    Jan 1 01:00:13 vuzero user.info kernel: console [ttyS0] enabled
    Jan 1 01:00:13 vuzero user.info kernel: bootconsole [early0] disabled
    Jan 1 01:00:13 vuzero user.info kernel: serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
    Jan 1 01:00:13 vuzero user.info kernel: serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
    Jan 1 01:00:13 vuzero user.info kernel: loop: module loaded
    Jan 1 01:00:13 vuzero user.err kernel: ahci strict-ahci.0: can't get clock
    Jan 1 01:00:13 vuzero user.debug kernel: __clk_enable: sata [1]
    Jan 1 01:00:13 vuzero user.info kernel: ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
    Jan 1 01:00:13 vuzero user.info kernel: ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    Jan 1 01:00:13 vuzero user.info kernel: ahci strict-ahci.0: flags: ncq sntf stag clo slum part
    Jan 1 01:00:13 vuzero user.info kernel: scsi0 : ahci_platform
    Jan 1 01:00:13 vuzero user.info kernel: scsi1 : ahci_platform
    Jan 1 01:00:13 vuzero user.notice kernel: ata1: FORCE: PHY spd limit set to 1.5Gbps
    Jan 1 01:00:13 vuzero user.info kernel: ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
    Jan 1 01:00:13 vuzero user.info kernel: ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
    Jan 1 01:00:13 vuzero user.info kernel: brcmstb_nand: NAND controller driver is loaded
    Jan 1 01:00:13 vuzero user.debug kernel: __clk_enable: network [1]
    Jan 1 01:00:13 vuzero user.debug kernel: __clk_enable: enet [1]
    Jan 1 01:00:13 vuzero user.debug kernel: bcm7552_pm_genet_enable 00
    Jan 1 01:00:13 vuzero user.info kernel: bcmgenet: configuring instance #0 for internal PHY
    Jan 1 01:00:13 vuzero user.info kernel: bcmgenet bcmgenet.0 eth0: link down
    Jan 1 01:00:13 vuzero user.debug kernel: __clk_disable: enet [0]
    Jan 1 01:00:13 vuzero user.debug kernel: bcm7552_pm_genet_disable 00
    Jan 1 01:00:13 vuzero user.debug kernel: __clk_disable: network [0]
    Jan 1 01:00:13 vuzero user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 1 01:00:13 vuzero user.debug kernel: __clk_enable: usb [1]
    Jan 1 01:00:13 vuzero user.debug kernel: bcm7552_pm_usb_enable 00
    Jan 1 01:00:13 vuzero user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    Jan 1 01:00:13 vuzero user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    Jan 1 01:00:13 vuzero user.info kernel: ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    Jan 1 01:00:13 vuzero user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    Jan 1 01:00:13 vuzero user.info kernel: hub 1-0:1.0: USB hub found
    Jan 1 01:00:13 vuzero user.info kernel: hub 1-0:1.0: 2 ports detected
    Jan 1 01:00:13 vuzero user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan 1 01:00:13 vuzero user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    Jan 1 01:00:13 vuzero user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
    Jan 1 01:00:13 vuzero user.info kernel: ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
    Jan 1 01:00:13 vuzero user.info kernel: hub 2-0:1.0: USB hub found
    Jan 1 01:00:13 vuzero user.info kernel: hub 2-0:1.0: 2 ports detected
    Jan 1 01:00:13 vuzero user.info kernel: usbcore: registered new interface driver usb-storage
    Jan 1 01:00:13 vuzero user.info kernel: mousedev: PS/2 mouse device common for all mice
    Jan 1 01:00:13 vuzero user.info kernel: i2c /dev entries driver
    Jan 1 01:00:13 vuzero user.info kernel: IR NEC protocol handler initialized
    Jan 1 01:00:13 vuzero user.info kernel: IR RC5(x) protocol handler initialized
    Jan 1 01:00:13 vuzero user.info kernel: IR RC6 protocol handler initialized
    Jan 1 01:00:13 vuzero user.info kernel: IR JVC protocol handler initialized
    Jan 1 01:00:13 vuzero user.info kernel: IR Sony protocol handler initialized
    Jan 1 01:00:13 vuzero user.info kernel: IR RC5 (streamzap) protocol handler initialized
    Jan 1 01:00:13 vuzero user.info kernel: IR SANYO protocol handler initialized
    Jan 1 01:00:13 vuzero user.info kernel: ata1: SATA link down (SStatus 0 SControl 310)
    Jan 1 01:00:13 vuzero user.info kernel: IR MCE Keyboard/mouse protocol handler initialized
    Jan 1 01:00:13 vuzero user.info kernel: gspca_main: v2.14.0 registered
    Jan 1 01:00:13 vuzero user.info kernel: sdhci: Secure Digital Host Controller Interface driver
    Jan 1 01:00:13 vuzero user.info kernel: sdhci: Copyright(c) Pierre Ossman
    Jan 1 01:00:13 vuzero user.info kernel: sdhci-pltfm: SDHCI platform and OF driver helper
    Jan 1 01:00:13 vuzero user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Jan 1 01:00:13 vuzero user.info kernel: usbcore: registered new interface driver usbhid
    Jan 1 01:00:13 vuzero user.info kernel: usbhid: USB HID core driver
    Jan 1 01:00:13 vuzero user.info kernel: TCP: cubic registered
    Jan 1 01:00:13 vuzero user.info kernel: NET: Registered protocol family 17
    Jan 1 01:00:13 vuzero user.notice kernel: Key type dns_resolver registered
    Jan 1 01:00:13 vuzero user.info kernel: PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    Jan 1 01:00:13 vuzero user.info kernel: EBI CS0: setting up NAND flash (primary)
    Jan 1 01:00:13 vuzero user.info kernel: NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix H27U2G8F2CTR-BC)
    Jan 1 01:00:13 vuzero user.info kernel: NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
    Jan 1 01:00:13 vuzero user.info kernel: NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix H27U2G8F2CTR-BC)
    Jan 1 01:00:13 vuzero user.info kernel: NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
    Jan 1 01:00:13 vuzero user.info kernel: brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
    Jan 1 01:00:13 vuzero user.info kernel: Bad block table found at page 131008, version 0x01
    Jan 1 01:00:13 vuzero user.info kernel: Bad block table found at page 130944, version 0x01
    Jan 1 01:00:13 vuzero user.info kernel: nand_read_bbt: bad block at 0x000003080000
    Jan 1 01:00:13 vuzero user.info kernel: nand_read_bbt: bad block at 0x0000030a0000
    Jan 1 01:00:13 vuzero user.notice kernel: Creating 4 MTD partitions on "brcmnand.0":
    Jan 1 01:00:13 vuzero user.notice kernel: 0x000002100000-0x000010000000 : "rootfs"
    Jan 1 01:00:13 vuzero user.notice kernel: 0x000002100000-0x000010000000 : "rootfs(redundant)"
    Jan 1 01:00:13 vuzero user.notice kernel: 0x000000200000-0x000000900000 : "kernel"
    Jan 1 01:00:13 vuzero user.notice kernel: 0x000000900000-0x000000a00000 : "mac"
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: attaching mtd0 to ubi0
    Jan 1 01:00:13 vuzero user.info kernel: usb 1-1: new high-speed USB device number 2 using ehci-brcm
    Jan 1 01:00:13 vuzero user.info kernel: ata2: SATA link down (SStatus 0 SControl 300)
    Jan 1 01:00:13 vuzero user.notice kernel: random: nonblocking pool is initialized
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: scanning is finished
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: attached mtd0 (name "rootfs", size 223 MiB) to ubi0
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: good PEBs: 1778, bad PEBs: 6, corrupted PEBs: 0
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: max/mean erase counter: 200/48, WL threshold: 4096, image sequence number: 2053618119
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 1778, PEBs reserved for bad PEB handling: 34
    Jan 1 01:00:13 vuzero user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 52
    Jan 1 01:00:13 vuzero user.info kernel: ALSA device list:
    Jan 1 01:00:13 vuzero user.info kernel: No soundcards found.
    Jan 1 01:00:13 vuzero user.notice kernel: UBIFS: parse sync
    Jan 1 01:00:13 vuzero user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 55
    Jan 1 01:00:13 vuzero user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    Jan 1 01:00:13 vuzero user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    Jan 1 01:00:13 vuzero user.notice kernel: UBIFS: FS size: 219541504 bytes (209 MiB, 1729 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    Jan 1 01:00:13 vuzero user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
    Jan 1 01:00:13 vuzero user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 1F96F81E-74F7-4898-BCE5-2F6C3F9A8DA8, small LPT model
    Jan 1 01:00:13 vuzero user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:12.
    Jan 1 01:00:13 vuzero user.info kernel: devtmpfs: mounted
    Jan 1 01:00:13 vuzero user.info kernel: Freeing unused kernel memory: 204K (8077d000 - 807b0000)
    Jan 1 01:00:13 vuzero daemon.info kernel: udevd[73]: starting version 182
    Jan 1 01:00:13 vuzero user.err kernel: UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    Jan 1 01:00:13 vuzero user.warn kernel: procmk_init
    Jan 1 01:00:13 vuzero user.info kernel: rtl8192cu: Chip version 0x11
    Jan 1 01:00:13 vuzero user.info kernel: rtl8192cu: MAC address: 14:dd:a9:2f:f0:35
    Jan 1 01:00:13 vuzero user.info kernel: rtl8192cu: Board Type 0
    Jan 1 01:00:13 vuzero user.info kernel: rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
    Jan 1 01:00:13 vuzero user.info kernel: rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
    Jan 1 01:00:13 vuzero user.info kernel: usbcore: registered new interface driver rtl8192cu
    Jan 1 01:00:13 vuzero user.warn kernel: usb 1-1: Direct firmware load failed with error -2
    Jan 1 01:00:13 vuzero user.warn kernel: usb 1-1: Falling back to user helper
    Jan 1 01:00:13 vuzero user.warn kernel: usb 1-1: Direct firmware load failed with error -2
    Jan 1 01:00:13 vuzero user.warn kernel: usb 1-1: Falling back to user helper
    Jan 1 01:00:13 vuzero user.info kernel: rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
    Jan 1 01:00:13 vuzero user.err kernel: rtlwifi: Firmware rtlwifi/rtl8192cufw_TMSC.bin not available
    Jan 1 01:00:13 vuzero user.err kernel: Error: Driver 'rtl8192cu' is already registered, aborting...
    Jan 1 01:00:13 vuzero user.warn kernel: dvb_bcm7362: module license 'Proprietary' taints kernel.
    Jan 1 01:00:13 vuzero user.warn kernel: Disabling lock debugging due to kernel taint
    Jan 1 01:00:13 vuzero user.info kernel: DVB: registering new adapter (_vuplus_zero_)
    Jan 1 01:00:13 vuzero user.warn kernel: bcm7362: hotplug_callback():
    Jan 1 01:00:13 vuzero user.warn kernel: Hotplug - status.connected 1:0:0
    Jan 1 01:00:13 vuzero user.warn kernel: bcm7362: hotplug_callback():
    Jan 1 01:00:13 vuzero user.warn kernel: Hotplug - connecting HDMI to display 0xe
    Jan 1 01:00:13 vuzero user.warn kernel: [GP]:brcm_pwm_init
    Jan 1 01:00:13 vuzero user.info kernel: brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
    Jan 1 01:00:13 vuzero user.warn kernel: [MPVR]: >> misc_pvr_init
    Jan 1 01:00:13 vuzero user.warn kernel: [VID]: ^A6bcm7335_video_init
    Jan 1 01:00:13 vuzero user.warn kernel: [AUD]: ^A6bcm7335_audio_init
    Jan 1 01:00:13 vuzero user.warn kernel: bcm7362: hotplug_callback():
    Jan 1 01:00:13 vuzero user.warn kernel: Hotplug - status.connected 1:1:2
    Jan 1 01:00:13 vuzero user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7362 FE)...
    Jan 1 01:00:13 vuzero user.info kernel: input: dreambox advanced remote control (native) as /devices/virtual/input/input0
    Jan 1 01:00:13 vuzero user.info kernel: [LCD]: registered
    Jan 1 01:00:13 vuzero user.warn kernel: 0:0
    Jan 1 01:00:13 vuzero user.info kernel: [DFP]: registered dbox fp
    Jan 1 01:00:13 vuzero user.info kernel: [SC]: registered sci0
    Jan 1 01:00:13 vuzero user.warn kernel: system_time_set wakeup mode get
    Jan 1 01:00:13 vuzero user.warn kernel: system_time_set wakeup mode get 0xc4
    Jan 1 01:00:13 vuzero user.warn kernel: fpga update driver loaded
    Jan 1 01:00:13 vuzero user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
    Jan 1 01:00:13 vuzero user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1 0
    Jan 1 01:00:13 vuzero user.warn kernel: [VID]: VIDEO_PLAY 1 2 0
    Jan 1 01:00:13 vuzero user.warn kernel: [VID]: VIDEO_CONTINUE 1 1
    Jan 1 01:00:13 vuzero user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1 1 0
    Jan 1 01:00:13 vuzero user.debug kernel: __clk_enable: network [1]
    Jan 1 01:00:13 vuzero user.debug kernel: __clk_enable: enet [1]
    Jan 1 01:00:13 vuzero user.debug kernel: bcm7552_pm_genet_enable 00
    Jan 1 01:00:13 vuzero user.warn kernel: [VID]: VIDEO_STOP 0 1
    Jan 1 01:00:13 vuzero user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0 0
    Jan 1 01:00:13 vuzero user.info kernel: bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
    Jan 1 01:00:13 vuzero user.info kernel: NET: Registered protocol family 10
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Found user 'avahi' (UID 998) and group 'avahi' (GID 997).
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Successfully dropped root privileges.
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: avahi-daemon 0.6.31 starting up.
    Jan 1 01:00:14 vuzero daemon.warn avahi-daemon[409]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Successfully called chroot().
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Successfully dropped remaining capabilities.
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Loading service file /services/sftp-ssh.service.
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Loading service file /services/ssh.service.
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.234.
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: New relevant interface eth0.IPv4 for mDNS.
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Network interface enumeration completed.
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Registering new address record for fe80::21d:ecff:fe08:9c18 on eth0.*.
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Registering new address record for 192.168.0.234 on eth0.IPv4.
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Registering HINFO record with values 'MIPS'/'LINUX'.
    Jan 1 01:00:14 vuzero user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
    Jan 1 01:00:14 vuzero user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1 0
    Jan 1 01:00:14 vuzero user.warn kernel: [VID]: VIDEO_PLAY 1 2 0
    Jan 1 01:00:14 vuzero user.warn kernel: [VID]: VIDEO_CONTINUE 1 1
    Jan 1 01:00:14 vuzero user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1 1 0
    Jan 1 01:00:14 vuzero user.warn kernel: [VID]: VIDEO_STOP 0 1
    Jan 1 01:00:14 vuzero user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0 0
    Jan 1 01:00:14 vuzero daemon.info avahi-daemon[409]: Server startup complete. Host name is vuzero.local. Local service cookie is 396694236.
    Jan 1 01:00:15 vuzero daemon.info avahi-daemon[409]: Service "vuzero" (/services/ssh.service) successfully established.
    Jan 1 01:00:15 vuzero daemon.info avahi-daemon[409]: Service "vuzero" (/services/sftp-ssh.service) successfully established.
    Jan 1 01:00:16 vuzero user.err kernel: [LCD]: unknown cmd 0x1015
    Jan 1 01:00:18 vuzero user.err kernel: UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
    Jan 1 01:00:44 vuzero user.warn kernel: [AUD]: AUDIO_SET_MUTE 0
    Jan 1 01:00:44 vuzero user.warn kernel: [AUD]: AUDIO_SET_MIXER -1353703952
    Jan 1 01:00:44 vuzero user.warn kernel: [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    Jan 1 01:00:44 vuzero user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
    Jan 1 01:00:44 vuzero user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    Jan 1 01:00:44 vuzero user.warn kernel: [AUD]: AUDIO_SET_MIXER -1353703952
    Jan 1 01:00:44 vuzero user.warn kernel: [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    Jan 1 01:00:44 vuzero user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    Jan 1 01:00:44 vuzero user.warn kernel: [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    Jul 9 17:36:49 vuzero user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    Jul 9 17:36:49 vuzero user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0
    Jul 9 17:36:49 vuzero user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 8
    Jul 9 17:36:49 vuzero user.warn kernel: [AUD]: AAC downmix 0 state : 0
    Jul 9 17:36:49 vuzero user.warn kernel: [AUD]: AUDIO_PAUSE 6424656
    Jul 9 17:36:49 vuzero user.warn kernel: [AUD]: AUDIO_PLAY 6424656 decoder start : 0
    Jul 9 17:36:49 vuzero user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0 0
    Jul 9 17:36:49 vuzero user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 1
    Jul 9 17:36:49 vuzero user.warn kernel: [VID]: VIDEO_FREEZE 6424656 0
    Jul 9 17:36:49 vuzero user.warn kernel: [VID]: VIDEO_PLAY 6424656 5 2
    Jul 9 17:36:49 vuzero user.warn kernel: [VID]: VIDEO_SLOWMOTION 0 1
    Jul 9 17:36:49 vuzero user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0 1
    Jul 9 17:36:49 vuzero user.warn kernel: [VID]: VIDEO_CONTINUE 6424656 1
    Jul 9 17:36:49 vuzero user.warn kernel: [AUD]: AUDIO_CONTINUE 6424656 1 aph=0xaedb3880
    Jul 9 17:36:49 vuzero user.warn kernel: [AUD]: Mute : 0
    Jul 9 17:36:49 vuzero user.warn kernel: [AUD]: AUDIO_CHANNEL_SELECT 0
    Jul 9 17:37:02 vuzero cron.err crond[389]: time disparity of 24993576 minutes detected
    Jul 9 17:37:21 vuzero auth.info login[491]: root login on 'pts/0'
    Jul 9 17:40:39 vuzero user.info kernel: usb 1-1: USB disconnect, device number 2
    Jul 9 17:40:39 vuzero user.err kernel: rtl_usb: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x80209200
    Jul 9 17:40:39 vuzero user.err kernel: rtl_usb: reg 0x422, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x80209200
    Jul 9 17:40:39 vuzero user.err kernel: rtl_usb: reg 0x542, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x20
    Jul 9 17:40:39 vuzero user.err kernel: rtl_usb: reg 0x824, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x80
    Jul 9 17:40:42 vuzero user.info kernel: usb 1-1: new high-speed USB device number 3 using ehci-brcm
    Jul 9 17:40:42 vuzero user.info kernel: rtl8192cu: Chip version 0x11
    Jul 9 17:40:43 vuzero user.info kernel: rtl8192cu: MAC address: 14:dd:a9:2f:f0:35
    Jul 9 17:40:43 vuzero user.info kernel: rtl8192cu: Board Type 0
    Jul 9 17:40:43 vuzero user.info kernel: rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
    Jul 9 17:40:43 vuzero user.info kernel: rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
    Jul 9 17:40:43 vuzero user.warn kernel: usb 1-1: Direct firmware load failed with error -2
    Jul 9 17:40:43 vuzero user.warn kernel: usb 1-1: Falling back to user helper
    Jul 9 17:40:43 vuzero user.warn kernel: usb 1-1: Direct firmware load failed with error -2
    Jul 9 17:40:43 vuzero user.warn kernel: usb 1-1: Falling back to user helper
    Jul 9 17:40:43 vuzero user.info kernel: rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
    Jul 9 17:40:43 vuzero user.err kernel: rtlwifi: Firmware rtlwifi/rtl8192cufw_TMSC.bin not available

    Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von son^c ()

  • Ich werde nicht ganz schlau aus dem /var/log/messages - die letzten beiden Zeilen: wird die Firmware geladen oder nicht? Sprich: hast du unter /lib/firmware/rtlwifi die Datei rtl8192cufw.bin stehen? Wenn nein: keine Ahnung in welchem Paket die versteckt ist, findet man aber leicht im Netz; wenn ja: was sagt "iwconfig"? Es sieht nämlich eigentlich so aus, als ob der Treiber geladen wurde...
    Diskutiere nie mit einem Idioten. Er zieht dich auf sein Niveau runter und schlägt dich mit seiner Erfahrung.

  • Spoiler anzeigen

    root@vuzero:~# iwconfig
    lo no wireless extensions.

    eth0 no wireless extensions.


    im rtlwifi ist nur die rtl8712u.bin datei

    Habe jetzt manuel die datei rtl8192cufw.bin in den Ordner gepackt und der Stick wird im netzwerk erkannt muss gucken ob ich auch eine verbindung bekomme melde mich im Anschluß...

    Danke schonmal vielmals

    (wieso ging das jetzt nicht automatisch)

  • Ich hab unter Debian -- Informationen über Paket firmware-realtek in jessie - dann in der rechten Spalte unter "herunterladen" als tar.gz-Datei ein Paket gefunden, in dem die Datei enthalten ist; probier mal was passiert, wenn du die Datei "rtl8192cufw.bin" aus dem Paket in das Firmware-Verzeichnis kopierst.

    Und zu langsam :D
    Diskutiere nie mit einem Idioten. Er zieht dich auf sein Niveau runter und schlägt dich mit seiner Erfahrung.

    Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von rdamas ()