DUO4K SE Astra and Hotbird configuration

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Sorry but i don't tink so....
      If i put Unicable configuration I have to enter the channel scr.

      If i insert olny one scr channel I see only one channel.

      What do you mean by hotbird configuration?

      I have two separate UNICABLE cable,

      Actually i have tuner a and b DBV-T

      Tuner C Unicable SCR 0
      Tuner D Unicable SCR 1 connect to tuner C

      At the moment the antennaists are inserting the second lnb with astra

    • Tunerkonfiguration Vu+ Duo 4K (SE) mit einem DVB-S2X FBC Dual Tuner und einem DVB-T2 Dual Tuner – Vu+ WIKI
      Attention, the linked configuration is for one cable.

      translator

      It´s recommended to put the DVB-T2 tuner in Slot B.
      An alle Neulinge und auch einige alte Hasen: Bitte denkt an eine Sicherung.
      BackupSuite und Image-Backup sind kein Hexenwerk, und ruckzuck erledigt!

      Dieser Beitrag wurde bereits 7 mal editiert, zuletzt von TomKruhs ()

    • I never had a config lilke yours, but I think it should work with this config:
      One cable to tuner/input A, the other one to B
      In Setup:
      tuner A unicable, your LNB
      Hotbird
      SCR0, not connected
      tuner B unicable, your LNB
      astra
      SCR0 , not connected
      Tuner C connected to A
      SCR1
      Tuner D connected to C
      SCR2
      Tuner E connected to D
      SCR3
      Tuner F connected to B
      SCR1
      Tuner G connected to F
      SCR2
      Tuner H connected to G
      SCR3
      ACHTUNG!!!! Hier folgt eine Signatur:


      Die Benutzung der Suche ist NICHT verboten! D:

      "Hilfe!!!" ist kein sinnvoller Titel für einen neuen Thread, ebensowenig "VU+Zero" oder vergleichbares.

      Keine Hilfe ohne ausgefülltes Profil!
      Kein Netzwerksupport bei manueller IP-Adress-Vergabe :-)
      Kein Support bei portforwardings/ Portfreigaben

      Profil extra angepasst für die arme Emma, die sonst nichts im Leben hat :happy1:

    • Hi all. I found the solution. The problem seem enigma2 configurator put wrong line.

      init 4 stop enigma2
      edit settings manually
      init 3

      whitout init 4 and init 3 settings are not saved.

      I put manually the line and i have two scr channel for hotbird and two for astra.
      I can record now one channel on hotbird and watch other ever on hotbird.
      Same on astra.
      Spoiler anzeigen

      config.Nims.2.configMode=advanced
      config.Nims.2.advanced.sat.130.lnb=1
      config.Nims.2.advanced.lnb.1.lof=unicable
      config.Nims.2.advanced.lnb.1.unicableLnbManufacturer=Humax
      config.Nims.2.advanced.lnb.1.unicableLnb.Humax.product=150 SCR
      config.Nims.2.advanced.lnb.1.unicableLnb.Humax.vco.150 SCR.0=1210
      config.Nims.3.configMode=advanced
      config.Nims.3.advanced.sat.192.lnb=1
      config.Nims.3.advanced.lnb.1.lof=unicable
      config.Nims.3.advanced.lnb.1.unicableLnbManufacturer=Humax
      config.Nims.3.advanced.lnb.1.unicableLnb.Humax.product=150 SCR
      config.Nims.3.advanced.lnb.1.unicableLnb.Humax.vco.150 SCR.0=1210
      config.Nims.4.configMode=advanced
      config.Nims.4.advanced.unicableconnectedTo=2
      config.Nims.4.advanced.unicableconnected=true
      config.Nims.4.advanced.sat.130.lnb=1
      config.Nims.4.advanced.sats=130
      config.Nims.4.advanced.lnb.1.lof=unicable
      config.Nims.4.advanced.lnb.1.unicableLnbManufacturer=Humax
      config.Nims.4.advanced.lnb.1.unicableLnb.Humax.product=150 SCR
      config.Nims.4.advanced.lnb.1.unicableLnb.Humax.vco.150 SCR.1=1420
      config.Nims.4.advanced.lnb.1.unicableLnb.Humax.scr.150 SCR=2
      config.Nims.5.configMode=advanced
      config.Nims.5.advanced.unicableconnectedTo=3
      config.Nims.5.advanced.unicableconnected=true
      config.Nims.5.advanced.sat.192.lnb=1
      config.Nims.5.advanced.sats=192
      config.Nims.5.advanced.lnb.1.lof=unicable
      config.Nims.5.advanced.lnb.1.unicableLnbManufacturer=Humax
      config.Nims.5.advanced.lnb.1.unicableLnb.Humax.product=150 SCR
      config.Nims.5.advanced.lnb.1.unicableLnb.Humax.vco.150 SCR.1=1420
      config.Nims.5.advanced.lnb.1.unicableLnb.Humax.scr.150 SCR=2

    • No technical limitations. Two is enough for me but I could set up four if I want to ..

      Nims 0 and 1 are DVB_T tuner on duo4kse
      Spoiler anzeigen

      config.Nims.2.configMode=advanced
      config.Nims.2.advanced.sat.130.lnb=1
      config.Nims.2.advanced.lnb.1.lof=unicable
      config.Nims.2.advanced.lnb.1.unicableLnbManufacturer=Humax
      config.Nims.2.advanced.lnb.1.unicableLnb.Humax.product=150 SCR
      config.Nims.2.advanced.lnb.1.unicableLnb.Humax.vco.150 SCR.0=1210
      config.Nims.3.configMode=advanced
      config.Nims.3.advanced.sat.192.lnb=1
      config.Nims.3.advanced.lnb.1.lof=unicable
      config.Nims.3.advanced.lnb.1.unicableLnbManufacturer=Humax
      config.Nims.3.advanced.lnb.1.unicableLnb.Humax.product=150 SCR
      config.Nims.3.advanced.lnb.1.unicableLnb.Humax.vco.150 SCR.0=1210
      config.Nims.4.configMode=advanced
      config.Nims.4.advanced.unicableconnectedTo=2
      config.Nims.4.advanced.unicableconnected=true
      config.Nims.4.advanced.sat.130.lnb=1
      config.Nims.4.advanced.sats=130
      config.Nims.4.advanced.lnb.1.lof=unicable
      config.Nims.4.advanced.lnb.1.unicableLnbManufacturer=Humax
      config.Nims.4.advanced.lnb.1.unicableLnb.Humax.product=150 SCR
      config.Nims.4.advanced.lnb.1.unicableLnb.Humax.vco.150 SCR.1=1420
      config.Nims.4.advanced.lnb.1.unicableLnb.Humax.scr.150 SCR=2
      config.Nims.5.configMode=advanced
      config.Nims.5.advanced.unicableconnectedTo=3
      config.Nims.5.advanced.unicableconnected=true
      config.Nims.5.advanced.sat.192.lnb=1
      config.Nims.5.advanced.sats=192
      config.Nims.5.advanced.lnb.1.lof=unicable
      config.Nims.5.advanced.lnb.1.unicableLnbManufacturer=Humax
      config.Nims.5.advanced.lnb.1.unicableLnb.Humax.product=150 SCR
      config.Nims.5.advanced.lnb.1.unicableLnb.Humax.vco.150 SCR.1=1420
      config.Nims.5.advanced.lnb.1.unicableLnb.Humax.scr.150 SCR=2