Hallo
Habe mir gerade eine VU+ Zero (REV2 (als 2te box neben einer Solo)) geordert.
Ging gerade die Wiki durch und bin eigentlich über eine Lücke gestolpert.
Laut vuplus-support.org/wbb4/vtisof…r=Bootloader/Vu%2B%20Zero gibt es einen bootloader
Laut Bootloader – Vu+ WIKI - gibt es nur den Hinweis das Zero 4k keinen braucht (von Zero - egal welche Rev) keine Rede...
Sicherheitsfrage und meine Vermutung: der Zero Rev.2 braucht den bootloader vor VTI flaschen?
Ja?
Nein?
(Falls ja: wer korrigiert Bootloader – Vu+ WIKI ?
** Brief explanation of Zero's bootloader update **
1. Unzip the vuplus_zero_cfev1.04.zip to USB stick.(There should be /vuplus/zero/cfe_cfe_auto.bin)
2. Insert USB stick into the USB port of Zero and turn the power on.
3. It takes just a few seconds to update.
4. If front LED of Zero displays blinking, remove the USB stick and restart the box.
5. If the update of the Zero CFE has completed successfully, the LED will blink four times on reboot.
)
Habe mir gerade eine VU+ Zero (REV2 (als 2te box neben einer Solo)) geordert.
Ging gerade die Wiki durch und bin eigentlich über eine Lücke gestolpert.
Laut vuplus-support.org/wbb4/vtisof…r=Bootloader/Vu%2B%20Zero gibt es einen bootloader
Laut Bootloader – Vu+ WIKI - gibt es nur den Hinweis das Zero 4k keinen braucht (von Zero - egal welche Rev) keine Rede...
Sicherheitsfrage und meine Vermutung: der Zero Rev.2 braucht den bootloader vor VTI flaschen?
Ja?
Nein?
(Falls ja: wer korrigiert Bootloader – Vu+ WIKI ?
** Brief explanation of Zero's bootloader update **
1. Unzip the vuplus_zero_cfev1.04.zip to USB stick.(There should be /vuplus/zero/cfe_cfe_auto.bin)
2. Insert USB stick into the USB port of Zero and turn the power on.
3. It takes just a few seconds to update.
4. If front LED of Zero displays blinking, remove the USB stick and restart the box.
5. If the update of the Zero CFE has completed successfully, the LED will blink four times on reboot.
)
cu
hilde
hilde