VU Ultimo 4k does not detect USB DVB-T2/C Turbo tuner
I have connected usb tuner to USB port and DVB-T2 antenna.
Tuner looks like this one in Wiki: VU+ Turbo USB DVB-C/T2 Hybrid Tuner – Vu+ WIKI
LED is lightning in red
USB device is detected by kernel:
T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=b711 ProdID=1211 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
And kernel modules are loaded:
usbcore: registered new interface driver vuplus_tuner_turbo_driver
Module Size Used by
vuplus_tuner_turbo_driver 379727 0
cypress_firmware 1383 1 vuplus_tuner_turbo_driver
dvb_usb_v2 20747 1 vuplus_tuner_turbo_driver
but still tuner does not show up in tuners list /proc/bus/nim_sockets
I cannot see any new letter in enigma2 tuners list
I cannot see any new tuners in Configuration -> Channel Search -> Tuner configuration
What am I missing?
VTi image 15.0.0
I have connected usb tuner to USB port and DVB-T2 antenna.
Tuner looks like this one in Wiki: VU+ Turbo USB DVB-C/T2 Hybrid Tuner – Vu+ WIKI
LED is lightning in red
USB device is detected by kernel:
T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=b711 ProdID=1211 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
And kernel modules are loaded:
usbcore: registered new interface driver vuplus_tuner_turbo_driver
Module Size Used by
vuplus_tuner_turbo_driver 379727 0
cypress_firmware 1383 1 vuplus_tuner_turbo_driver
dvb_usb_v2 20747 1 vuplus_tuner_turbo_driver
but still tuner does not show up in tuners list /proc/bus/nim_sockets
I cannot see any new letter in enigma2 tuners list
I cannot see any new tuners in Configuration -> Channel Search -> Tuner configuration
What am I missing?
VTi image 15.0.0