Hallo,
ich habe aktuell folgendes (wohl eher ungewöhnliche) Setup zu dem ich bisher keinen Thread oder Eintrag im Wiki mit entsprechenden Informationen finden konnte:
Spoiler anzeigen
Unicable Port
Userband Standard* Frequenz
1 Unicable I & II 1210 MHz
2 Unicable I & II 1420 MHz
3 Unicable I & II 1680 MHz
4 Unicable I & II 2040 MHz
5 Unicable I & II 984 MHz
6 Unicable I & II 1020 MHz
7 Unicable I & II 1056 MHz
8 Unicable I & II 1092 MHz
9 Unicable II 1128 MHz
10 Unicable II 1164 MHz
11 Unicable II 1256 MHz
12 Unicable II 1292 MHz
13 Unicable II 1328 MHz
14 Unicable II 1364 MHz
15 Unicable II 1458 MHz
16 Unicable II 1494 MHz
17 Unicable II 1530 MHz
18 Unicable II 1566 MHz
19 Unicable II 1602 MHz
20 Unicable II 1638 MHz
21 Unicable II 1716 MHz
22 Unicable II 1752 MHz
23 Unicable II 1788 MHz
24 Unicable II 1824 MHz
25 Unicable II 1860 MHz
26 Unicable II 1896 MHz
27 Unicable II 1932 MHz
28 Unicable II 1968 MHz
29 Unicable II 2004 MHz
30 Unicable II 2076 MHz
31 Unicable II 2112 MHz
32 Unicable II 2148 MHz
In VTI habe ich aktuell folgende Tunerkonfiguration:
Nun hätte ich ein paar Fragen:
1. Sind die Tunereinstellungen grundsätzlich richtig und sollte es damit funktionieren oder kommt die VU bzw. FCC mit diesem Unicable/Universal Mix auf Tuner A und B nicht klar?
2. Führen kleine Signalfehler zu Problemen beim FCC und wie zuverlässig funktioniert FCC bei perfektem Empfang?
3. Könnte ich z.B. Tuner H so umkonfigurieren, dass dieser sich mit Tuner B verbindet und somit FCC für 13e möglich wird?
Grüße
ich habe aktuell folgendes (wohl eher ungewöhnliche) Setup zu dem ich bisher keinen Thread oder Eintrag im Wiki mit entsprechenden Informationen finden konnte:
- Jeweils ein Inverto IDLU-32UL40-UNBOO-OPP für 19e (LNB1) und 28e (LNB2) welche über einen 2-Wege Unicable Combiner an Tuner 1 der Vu+ Uno 4k SE (VTI 15) angeschlossen sind
- Ein Universal LNB für 13e welches an Tuner 2 hängt
Unicable Port
Userband Standard* Frequenz
1 Unicable I & II 1210 MHz
2 Unicable I & II 1420 MHz
3 Unicable I & II 1680 MHz
4 Unicable I & II 2040 MHz
5 Unicable I & II 984 MHz
6 Unicable I & II 1020 MHz
7 Unicable I & II 1056 MHz
8 Unicable I & II 1092 MHz
9 Unicable II 1128 MHz
10 Unicable II 1164 MHz
11 Unicable II 1256 MHz
12 Unicable II 1292 MHz
13 Unicable II 1328 MHz
14 Unicable II 1364 MHz
15 Unicable II 1458 MHz
16 Unicable II 1494 MHz
17 Unicable II 1530 MHz
18 Unicable II 1566 MHz
19 Unicable II 1602 MHz
20 Unicable II 1638 MHz
21 Unicable II 1716 MHz
22 Unicable II 1752 MHz
23 Unicable II 1788 MHz
24 Unicable II 1824 MHz
25 Unicable II 1860 MHz
26 Unicable II 1896 MHz
27 Unicable II 1932 MHz
28 Unicable II 1968 MHz
29 Unicable II 2004 MHz
30 Unicable II 2076 MHz
31 Unicable II 2112 MHz
32 Unicable II 2148 MHz
In VTI habe ich aktuell folgende Tunerkonfiguration:
- Tuner A: 19e, LNB1, SatCR8, 1128
- Tuner A: 28e, LNB2, SatCR8, 1128
- Tuner B: 13e Single
- Tuner C: 19e, LNB1, SatCR9, 1164, Connected to Tuner A
- Tuner C: 28e, LNB2, SatCR9, 1164, Connected to Tuner A
- Tuner D: 19e, LNB1, SatCR10, 1256, Connected to Tuner C
- Tuner D: 28e, LNB2, SatCR10, 1256, Connected to Tuner C
- Tuner E-H nach gleichem Schema; sind immer mit "Vorgänger" connected
Nun hätte ich ein paar Fragen:
1. Sind die Tunereinstellungen grundsätzlich richtig und sollte es damit funktionieren oder kommt die VU bzw. FCC mit diesem Unicable/Universal Mix auf Tuner A und B nicht klar?
2. Führen kleine Signalfehler zu Problemen beim FCC und wie zuverlässig funktioniert FCC bei perfektem Empfang?
3. Könnte ich z.B. Tuner H so umkonfigurieren, dass dieser sich mit Tuner B verbindet und somit FCC für 13e möglich wird?
Grüße