Hallo,
ich habe jetzt seit einem guten Monat die Uno4kSE und bisher nur mit einer externen HD betrieben. Dies hat abgesehen vom Sleep Mode gut funktioniert. Eventuell sind auch manche Störsignale auf wenigen Sender auf das Kabel zurückzuführen. Aber das ist nur eine mögliche Quelle.
Hier benötige ich aber leider für ein anders Thema Eure Hilfe.
Ich habe mir jetzt im Internet eine Crucial MX500 2TB SSD bestellt und die ist nach langem hin und her mit dem Weltmarktführer vom Online Shopping endlich angekommen. Am WE habe ich sie dann eingebaut (eigentlich nur in den Schlitten gesteckt) und initialisiert bzw. formatiert (ext4). Ging alles reibungslos. Dann hab ich noch einen Ordner erstellt und dann per VTI Dateimanager von der externen HDD auf die interne SSD kopiert. Kleine Daten waren dann da und dann kam die TS Datei. Da brauchte er natürlich etwas. Ich ging weg und nach kurzem habe ich wieder hingeschaut, war es schon fertig - d.h. keine Tasks zu sehen. Ich habe dann mit dem Dateimanager das Verzeichnis angesehen und da war die TS Datei unvollständig oben, die weiteren Files überhaupt nicht. Die kleinen Dateien von zuvor jedoch schon.
Ich probiere nochmals per VTI zu kopieren, da ging es nicht. Als ich einen Ordner erstellen wollte ist dann VTI mit einem Crash rebootet.
Das Problem klingt sehr ähnlich wie dieses: USB SSD-Festplatte Ext4 read only allerdings eben mit einer internen SSD.
Ich habe dann die Platte ausgebaut und am Linux PC angeschlossen. Dort konnte ich auch nicht darauf schreiben. Die gesamte Platte war Write protected. Ich habe dann die Platte am PC neu ext4 formatiert und testweise einige Files darauf kopiert. Das ging schnell und problemlos.
Ich habe die Platte auch am PC geprüft und es konnte kein Problem gefunden werden.
Ich habs mir dann nochmal mit gsmartcontrol angesehen. Keine Fehler und die smartwerte sahen für mich eigentlich auch in Ordnung aus. Einzig die Stromzufuhr dürfte 2x weg gewesen sein. Aber ganz ehrlich gesagt kenne ich mich mit den Werten nicht aus:
Spoiler anzeigen
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-132-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs
Device Model: CT2000MX500SSD1
Serial Number: XXXXXXXXXXX
LU WWN Device Id: XXXXXXXXXX
Firmware Version: M3CR045
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Dec 18 13:48:42 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0
5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 7
171 Program_Fail_Count -O--CK 100 100 000 - 0
172 Erase_Fail_Count -O--CK 100 100 000 - 0
173 Ave_Block-Erase_Count -O--CK 100 100 000 - 0
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2
180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 137
183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0
184 Error_Correction_Count -O--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 074 072 000 - 26 (Min/Max 24/28)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
202 Percent_Lifetime_Remain ----CK 100 100 001 - 0
206 Write_Error_Rate -OSR-- 100 100 000 - 0
210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0
246 Total_LBAs_Written -O--CK 100 100 000 - 22391096
247 Host_Program_Page_Count -O--CK 100 100 000 - 194623
248 FTL_Program_Page_Count -O--CK 100 100 000 - 16486
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 88 Current Device Internal Status Data log
0x25 GPL R/O 128 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 0 -
# 2 Conveyance offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 24/28 Celsius
Lifetime Min/Max Temperature: 24/28 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: 0/100 Celsius
Temperature History Size (Index): 128 (57)
Index Estimated Time Temperature Celsius
58 2022-12-18 11:41 0 -
... ..( 68 skipped). .. -
127 2022-12-18 12:50 0 -
0 2022-12-18 12:51 ? -
... ..( 3 skipped). .. -
4 2022-12-18 12:55 ? -
5 2022-12-18 12:56 26 *******
6 2022-12-18 12:57 26 *******
7 2022-12-18 12:58 26 *******
8 2022-12-18 12:59 28 *********
... ..( 3 skipped). .. *********
12 2022-12-18 13:03 28 *********
13 2022-12-18 13:04 ? -
14 2022-12-18 13:05 ? -
15 2022-12-18 13:06 25 ******
16 2022-12-18 13:07 26 *******
... ..( 25 skipped). .. *******
42 2022-12-18 13:33 26 *******
43 2022-12-18 13:34 27 ********
44 2022-12-18 13:35 26 *******
45 2022-12-18 13:36 27 ********
46 2022-12-18 13:37 27 ********
47 2022-12-18 13:38 26 *******
48 2022-12-18 13:39 27 ********
49 2022-12-18 13:40 27 ********
50 2022-12-18 13:41 27 ********
51 2022-12-18 13:42 28 *********
52 2022-12-18 13:43 28 *********
53 2022-12-18 13:44 26 *******
54 2022-12-18 13:45 27 ********
55 2022-12-18 13:46 28 *********
56 2022-12-18 13:47 27 ********
57 2022-12-18 13:48 28 *********
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 7 --- Lifetime Power-On Resets
0x01 0x010 4 0 --- Power-on Hours
0x01 0x018 6 22391096 --- Logical Sectors Written
0x01 0x020 6 106690 --- Number of Write Commands
0x01 0x028 6 30535 --- Logical Sectors Read
0x01 0x030 6 1810 --- Number of Read Commands
0x01 0x038 6 3371612 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 27 --- Current Temperature
0x05 0x010 1 26 --- Average Short Term Temperature
0x05 0x018 1 25 --- Average Long Term Temperature
0x05 0x020 1 28 --- Highest Temperature
0x05 0x028 1 24 --- Lowest Temperature
0x05 0x030 1 28 --- Highest Average Short Term Temperature
0x05 0x038 1 0 --- Lowest Average Short Term Temperature
0x05 0x040 1 28 --- Highest Average Long Term Temperature
0x05 0x048 1 0 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 1 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Ich habe die SSD wieder in den Receiver reingesteckt und dort dann wieder per VTI etwas kopiert und wieder ist er mitten im kopieren abgebrochen und ist nun wieder in Write Protect Modus.
Nun dachte ich mache ich mal den check im receiver. Habe mir util-linux installiert denn lsblk -f funktionierte davor nicht?
Dann ging es und dann wollte ich e2fsck /dev/sda1 aufrufen, aber da kommt nun:
e2fsck: Get a newer version of e2fsck!
vermutlich weil ich zuvor das ganze am PC mit einem neueren Linux aufgerufen habe?
Jetzt bin ich mit meinem (nicht vorhandenem) Latein am Ende. Meine Befürchtung ist ja, dass nicht SSD kaputt ist, sondern die UNO4kSE etwas hat. Allerdings wäre das echt ein Problem. Das jetzt für Wochen zum Boardsponsor zurückschicken. In der zwischenzeit hätte ich dann keinen Receiver, weil bei der Duo2 inzwischen nicht nur der HDMI Port sondern auch der Scart Ausgang kaputt ist.
Vielleicht habt ihr noch einen Tipp was ich probieren könnte? Vielen Dank schon mal vorab, für alle die meinen "Roman" bis hierher gelesen haben.
ich habe jetzt seit einem guten Monat die Uno4kSE und bisher nur mit einer externen HD betrieben. Dies hat abgesehen vom Sleep Mode gut funktioniert. Eventuell sind auch manche Störsignale auf wenigen Sender auf das Kabel zurückzuführen. Aber das ist nur eine mögliche Quelle.
Hier benötige ich aber leider für ein anders Thema Eure Hilfe.
Ich habe mir jetzt im Internet eine Crucial MX500 2TB SSD bestellt und die ist nach langem hin und her mit dem Weltmarktführer vom Online Shopping endlich angekommen. Am WE habe ich sie dann eingebaut (eigentlich nur in den Schlitten gesteckt) und initialisiert bzw. formatiert (ext4). Ging alles reibungslos. Dann hab ich noch einen Ordner erstellt und dann per VTI Dateimanager von der externen HDD auf die interne SSD kopiert. Kleine Daten waren dann da und dann kam die TS Datei. Da brauchte er natürlich etwas. Ich ging weg und nach kurzem habe ich wieder hingeschaut, war es schon fertig - d.h. keine Tasks zu sehen. Ich habe dann mit dem Dateimanager das Verzeichnis angesehen und da war die TS Datei unvollständig oben, die weiteren Files überhaupt nicht. Die kleinen Dateien von zuvor jedoch schon.
Ich probiere nochmals per VTI zu kopieren, da ging es nicht. Als ich einen Ordner erstellen wollte ist dann VTI mit einem Crash rebootet.
Das Problem klingt sehr ähnlich wie dieses: USB SSD-Festplatte Ext4 read only allerdings eben mit einer internen SSD.
Ich habe dann die Platte ausgebaut und am Linux PC angeschlossen. Dort konnte ich auch nicht darauf schreiben. Die gesamte Platte war Write protected. Ich habe dann die Platte am PC neu ext4 formatiert und testweise einige Files darauf kopiert. Das ging schnell und problemlos.
Ich habe die Platte auch am PC geprüft und es konnte kein Problem gefunden werden.
Ich habs mir dann nochmal mit gsmartcontrol angesehen. Keine Fehler und die smartwerte sahen für mich eigentlich auch in Ordnung aus. Einzig die Stromzufuhr dürfte 2x weg gewesen sein. Aber ganz ehrlich gesagt kenne ich mich mit den Werten nicht aus:
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-132-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs
Device Model: CT2000MX500SSD1
Serial Number: XXXXXXXXXXX
LU WWN Device Id: XXXXXXXXXX
Firmware Version: M3CR045
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Dec 18 13:48:42 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0
5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 7
171 Program_Fail_Count -O--CK 100 100 000 - 0
172 Erase_Fail_Count -O--CK 100 100 000 - 0
173 Ave_Block-Erase_Count -O--CK 100 100 000 - 0
174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2
180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 137
183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0
184 Error_Correction_Count -O--CK 100 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 074 072 000 - 26 (Min/Max 24/28)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
202 Percent_Lifetime_Remain ----CK 100 100 001 - 0
206 Write_Error_Rate -OSR-- 100 100 000 - 0
210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0
246 Total_LBAs_Written -O--CK 100 100 000 - 22391096
247 Host_Program_Page_Count -O--CK 100 100 000 - 194623
248 FTL_Program_Page_Count -O--CK 100 100 000 - 16486
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 88 Current Device Internal Status Data log
0x25 GPL R/O 128 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 0 -
# 2 Conveyance offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 24/28 Celsius
Lifetime Min/Max Temperature: 24/28 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: 0/100 Celsius
Temperature History Size (Index): 128 (57)
Index Estimated Time Temperature Celsius
58 2022-12-18 11:41 0 -
... ..( 68 skipped). .. -
127 2022-12-18 12:50 0 -
0 2022-12-18 12:51 ? -
... ..( 3 skipped). .. -
4 2022-12-18 12:55 ? -
5 2022-12-18 12:56 26 *******
6 2022-12-18 12:57 26 *******
7 2022-12-18 12:58 26 *******
8 2022-12-18 12:59 28 *********
... ..( 3 skipped). .. *********
12 2022-12-18 13:03 28 *********
13 2022-12-18 13:04 ? -
14 2022-12-18 13:05 ? -
15 2022-12-18 13:06 25 ******
16 2022-12-18 13:07 26 *******
... ..( 25 skipped). .. *******
42 2022-12-18 13:33 26 *******
43 2022-12-18 13:34 27 ********
44 2022-12-18 13:35 26 *******
45 2022-12-18 13:36 27 ********
46 2022-12-18 13:37 27 ********
47 2022-12-18 13:38 26 *******
48 2022-12-18 13:39 27 ********
49 2022-12-18 13:40 27 ********
50 2022-12-18 13:41 27 ********
51 2022-12-18 13:42 28 *********
52 2022-12-18 13:43 28 *********
53 2022-12-18 13:44 26 *******
54 2022-12-18 13:45 27 ********
55 2022-12-18 13:46 28 *********
56 2022-12-18 13:47 27 ********
57 2022-12-18 13:48 28 *********
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 7 --- Lifetime Power-On Resets
0x01 0x010 4 0 --- Power-on Hours
0x01 0x018 6 22391096 --- Logical Sectors Written
0x01 0x020 6 106690 --- Number of Write Commands
0x01 0x028 6 30535 --- Logical Sectors Read
0x01 0x030 6 1810 --- Number of Read Commands
0x01 0x038 6 3371612 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 27 --- Current Temperature
0x05 0x010 1 26 --- Average Short Term Temperature
0x05 0x018 1 25 --- Average Long Term Temperature
0x05 0x020 1 28 --- Highest Temperature
0x05 0x028 1 24 --- Lowest Temperature
0x05 0x030 1 28 --- Highest Average Short Term Temperature
0x05 0x038 1 0 --- Lowest Average Short Term Temperature
0x05 0x040 1 28 --- Highest Average Long Term Temperature
0x05 0x048 1 0 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 1 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Ich habe die SSD wieder in den Receiver reingesteckt und dort dann wieder per VTI etwas kopiert und wieder ist er mitten im kopieren abgebrochen und ist nun wieder in Write Protect Modus.
Nun dachte ich mache ich mal den check im receiver. Habe mir util-linux installiert denn lsblk -f funktionierte davor nicht?
Dann ging es und dann wollte ich e2fsck /dev/sda1 aufrufen, aber da kommt nun:
e2fsck: Get a newer version of e2fsck!
vermutlich weil ich zuvor das ganze am PC mit einem neueren Linux aufgerufen habe?
Jetzt bin ich mit meinem (nicht vorhandenem) Latein am Ende. Meine Befürchtung ist ja, dass nicht SSD kaputt ist, sondern die UNO4kSE etwas hat. Allerdings wäre das echt ein Problem. Das jetzt für Wochen zum Boardsponsor zurückschicken. In der zwischenzeit hätte ich dann keinen Receiver, weil bei der Duo2 inzwischen nicht nur der HDMI Port sondern auch der Scart Ausgang kaputt ist.
Vielleicht habt ihr noch einen Tipp was ich probieren könnte? Vielen Dank schon mal vorab, für alle die meinen "Roman" bis hierher gelesen haben.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von viebrix ()