Nachtrag: Wenig überraschend finde ich die Duo2 auch nicht im Netzwerk, weder per WLAN noch per Kabel.
Hallo community,
vielleicht könnt' Ihr mir einen Tipp geben, um die Ursache einzugrenzen. Ich bemühe mich um eine vollständige Beschreibung und hab natürlich auch etwas Recherche betrieben:
Nachdem meine Duo2 jetzt über 9 Jahre lang klaglos gute Dienste geleistet hat, zeigte sie vor ein paar Tagen plötzlich aus heiterem TV-Himmel ein Standbild und das gute Stück reagierte auf keinerlei Eingaben mehr - zumindest nicht sichtbar am TV.
Daraufhin habe ich sie ausgeschaltet (am Power-Kippschalter auf der Rückseite) und seitdem zeigt sie nur noch folgendes Verhalten:
Lässt sich aus dieser Beschreibung interpretieren, ob das Problem in CPU, Board oder Netzteil zu suchen ist?
Jetzt frage ich mich natürlich, wie ich dem an sinnvollsten beikommen kann und ob ich evtl. am einfachsten ein Ersatzteil kaufen und tauschen sollte (falls sich das finanziell lohnt).
Danke Euch vorab für Eure Zeit & Mühe!
Hallo community,
vielleicht könnt' Ihr mir einen Tipp geben, um die Ursache einzugrenzen. Ich bemühe mich um eine vollständige Beschreibung und hab natürlich auch etwas Recherche betrieben:
Nachdem meine Duo2 jetzt über 9 Jahre lang klaglos gute Dienste geleistet hat, zeigte sie vor ein paar Tagen plötzlich aus heiterem TV-Himmel ein Standbild und das gute Stück reagierte auf keinerlei Eingaben mehr - zumindest nicht sichtbar am TV.
Daraufhin habe ich sie ausgeschaltet (am Power-Kippschalter auf der Rückseite) und seitdem zeigt sie nur noch folgendes Verhalten:
- Beim Einschalten am Powerschalte der Rückseite geht die weiße LED an der Front an.
- Diese blinkt auch, wenn ich auf den Power-Schalter an der Front drücke, aber sonst ist keine Reaktion erkennbar.
- Diese blinkt auch, wenn ich auf den Power-Schalter an der Front drücke, aber sonst ist keine Reaktion erkennbar.
- Die eingebaute HDD läuft hör- und spürbar scheinbar normal an, aber auch ohne die HDD ändert sich das restliche Verhalten nicht.
- Der Lüfter rührt sich im Gegensatz zur HDD allerdings null.
- Der Versuch, das Image per USB-Stick neu aufzuspielen scheitert daran, dass allem Anschein nach gar kein Zugriff auf den Stick erfolgt (getestet mit 2 verschiedenen Sticks (4GB und 8GB, wobei ich mit einem davon schon das letzte Image aufgespielt hatte).
- Nachdem ich mir jetzt ein Kabel besorgt habe, bekomme ich auch eine Verbindung auf der RS232-Schnittstelle. Der Output beim stimmt mich allerdings wenig hoffnungsvoll:
- "BCM74250012
M0
M1
0000E0000F
00080000
Feeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee [jetzt geht es scheinbar endlos weiter mit 'e']" - Eingaben sind in diesem Zustand natürlich nicht möglich.
- Änderungen an der Config des RS232-Ports am PC an Stopbit und Flusssteuerung brachten leider keine Änderung, außer dass ich statt der oben beschriebenen Endlosausgabe von "eeee" z. B. "VVVVV" sehe.
- In duo2 fährt nicht mehr hoch, kleines Lämpchen am Display wird auf Seite 3 ein sehr ähnliches Verhalten beschrieben.
- In duo2 fährt nicht mehr hoch, kleines Lämpchen am Display wird auch gefragt, ob die COM-Schnittstelle richtig konfiguriert ist, aber leider habe ich noch keine vollständige Doku der richtigen Config gefunden, nur die Info, dass wohl 115200 Baud und 8 Datenbits benötigt werden. Könnt Ihr mir vielleicht mehr sagen über Stoppbits, Parität, Flusssteuerung und FIFO-Einst.?
- In duo2 fährt nicht mehr hoch, kleines Lämpchen am Display wird auch gefragt, ob die COM-Schnittstelle richtig konfiguriert ist, aber leider habe ich noch keine vollständige Doku der richtigen Config gefunden, nur die Info, dass wohl 115200 Baud und 8 Datenbits benötigt werden. Könnt Ihr mir vielleicht mehr sagen über Stoppbits, Parität, Flusssteuerung und FIFO-Einst.?
- "BCM74250012
- Natürlich bin ich auch auf verschiedene Threads zu geplatzten oder defekten Elkos gestoßen, aber zumindest optisch sieht es mir bei mir nicht danach aus. Ich hänge aber mal zwei Fotos an, evtl. hilft das weiter.
Lässt sich aus dieser Beschreibung interpretieren, ob das Problem in CPU, Board oder Netzteil zu suchen ist?
- Ist der RAM der Duo2 eigentlich verlötet oder evtl. auf der Board-Unterseite gesteckt? Evtl. hab ich noch was rumliegen, falls der als Ursache in Frage kommt.
Jetzt frage ich mich natürlich, wie ich dem an sinnvollsten beikommen kann und ob ich evtl. am einfachsten ein Ersatzteil kaufen und tauschen sollte (falls sich das finanziell lohnt).
- Gibt es überhaupt noch Ersatzteile für die Duo2 auf regulären Kanälen? Da muss ich nachher mal nachsehen.
Danke Euch vorab für Eure Zeit & Mühe!
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Cerberus () aus folgendem Grund: ergänzende Info bzgl. Netzwerk