Keine Ahnung,glaube nicht das du irgendwo ein Datum finden wirst
Angepinnt Boblight: (Support-Thread) Plugin für ambientes Licht
Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen
-
-
Danke sehr. Dauert ja schon eine Weile das es für die 4K verfügbar wird was keinesfalls als Kritik hier zu sehen sein sollte. Warte nur sehnsüchtig drauf.
-
Hallo,
ich will mir auch das Ambilight nachbauen und hab mir folgende Komponenten zugelegt:
VU+ Solo SE V2 mit aktuellem VTi
SEDU-Lights-Board V2
WS2801 LEDs
Ich habe schon diverse Versionen des Boblight Plugins installiert, bekomme es aber nicht zum laufen.
Das mit dem Config Tool hat ganz gut funktioniert, und ich konnte die Anzahl der und Position der LEDs festlegen.
Jetzt funktioniert aber eigentlich nur das "Moodlight" einigermaßen.
Bis auf die Tatsache, das die Farben falsch sind.
Wenn ich auf "dynamisch" schalte bleiben alle LEDs aus.
Was mache ich falsch? Habe ich da bei der Hardware was falsch verstanden, oder ist das ein Konfigurationsproblem?
Wäre schön, wenn mir da jemand weiterhelfen könnte.
Danke! -
Hallo nochmal,
habe das Problem jetzt auf das Boblight bzw. den Grabber eingegrenzt. Das Boblight zeigt immer 9.4fps@0x0(0x0) an. Ich denke, das es kein Bild erkennt. Es laufen aber alle benötigten Dienste.
Weiß da jemand Rat?
Vielen Dank -
Hallo,
das Boblight habe ich nicht zum Laufen bekommen.
Mit dem neueren Enigmalight funktioniert es super. -
Hi bitte helft mir....
Ich habe mir lightpack 90 LED gekauft
Bekomme es aber nicht zum laufen sobald ich creat config drück stürzt die Box up habe schon alle boblight plugins versucht ohne Erfolg....
Ps Test es auf der VU ZERO vti neuste angeschlossen an USB hinten unten 2 -
Moin,
bekommt ihr auch seit dem letzten VTI-Update diese Skin-Error-Meldungen? Hier z.B. beim Screen Adjustment ...
OT: Diese Fehlermeldungen seit dem VTI 11 nerven mich tierisch. Kann man die nicht vlt. irgendwo ab schalten?Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von HomeCoach ()
-
Ich nochmal. Kann es sein, das Boblight auf dem aktuellen Image nicht mehr läuft? Das einzige, was funktioniert, ist der Moodlamp-Modus. Der dynamische Modus läuft nicht.
Bei frames zeigt Boblight dann auch "0" an.
Bis vor kurzem ging das noch, auch mit dem VTI 11.x. Ist da vlt. bei einem der letzten Updates irgendwas passiert?
Edit: Ich hatte Boblight bis jetzt nur als An/Ausschalter für mein Hyperion-Ambilight auf dem Raspberry benutzt. Jetzt wollte ich mal umschalten und Boblight als Grabber benutzen und Hyperion die Steuerung der LEDs überlassen. Dat tut sich nix. Wollte dann mal an nem anderen TV mein Karatelight mit Boblight wieder in Betrieb nehmen. Geht auch nicht.,
Also: Bei mir läuft Boblight nicht mehrDieser Beitrag wurde bereits 2 mal editiert, zuletzt von HomeCoach ()
-
Hallo liebe VU+ Freunde,
Hallo,
ich habe vor meinen vorhandenen VU+ Solo2 Satreceiver als Quelle zu verwenden. Diese Quelle soll die Grabber Funktion übernehmen.
Auf dem Receiver habe ich die Anwendung Boblicht installiert.
Ich nutze einen Pi 3 mit der Kodi Software - Version Openelec zudem habe ich Hyperion installiert.
Alle Geräte sind über ein Netzwerkkabel mit dem Switch verbunden.
Das Ambilight ist insofern eingerichtet, dass er mir alle Farben im Kodi Menü darstellen kann, bzw. die Farben mit der Hyperion App starten.
Jetzt zu meinem Problem:
Ich bekomme es einfach nicht hin, den Receiver so einzubinden, sodass dieser die LEDs über den Pi ansteuert.
Im Receiver habe ich die IP und den Port des PIs eingegeben.
Unter den Boblicht Menüpunkt Netzwerk Einstellungen, habe ich folgendes eingeben: 192.168.178.8 und Port: 19333.
Es erscheint immer eine Fehlermeldung: Keine boblicht.conf in /ect vorhanden - obwohl die Datei vorhanden ist!
Ich muss doch sicherlich die HyperCon Datei passend bearbeiten und dort als Quelle den Receiver auswählen.
Wo gebe ich dort die IP ein? Muss ich noch einen Port oder so angeben?
Ich freue mich über alle Antworten. Vielen Dank!Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von example ()
-
Diesen Abschnitt hier in die hyperion.config.json einfügen:
Spoiler anzeigen
/// The configuration of the boblight server which enables the boblight remote interface
/// * port : Port at which the boblight server is started
"boblightServer" :
{
"port" : 19333
},
-
Guten Morgen, ich habe dies hinzugefügt.
In meinem Falls habe ich dies einfach hinten an die Datei "angehangen".
Sollte ich noch etwas ändern? Die IP der Box in Hyperion hinzufügen? -
Moin,
nein. Der Port reicht. Müsste jetzt funktionieren. Zeig doch mal deine hyperion.config.json und deine boblight.conf. -
Hallo,
vielen Dank für deine rasche Antwort.
Ich habe den Inhalt in die Datei kopiert, allerdings hat sich nichts geändert.
D.h. die LEDs werden ausschließlich von den Pi angesteuert, nicht von dem Receiver.
Hier mal die hyperion.confi. jso:
Spoiler anzeigen
// Automatically generated configuration file for Hyperion ambilight daemon
// Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.03.1 (11.06.2016)
{
// DEVICE CONFIGURATION
"device" :
{
"name" : "Mein TV 1",
"type" : "apa102",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"colorOrder" : "bgr"
},
// COLOR CALIBRATION CONFIG
"color" :
{
"channelAdjustment" :
[
{
"id" : "default",
"leds" : "*",
"pureRed" :
{
"redChannel": 255,
"greenChannel": 0,
"blueChannel": 0
},
"pureGreen" :
{
"redChannel": 0,
"greenChannel": 255,
"blueChannel": 0
},
"pureBlue" :
{
"redChannel": 0,
"greenChannel": 0,
"blueChannel": 255
}
}
],
"temperature" :
[
{
"id" : "default",
"leds" : "*",
"correctionValues" :
{
"red" : 255,
"green" : 255,
"blue" : 255
}
}
],
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsl" :
{
"saturationGain" : 1.0000,
"luminanceGain": 1.0000,
"luminanceMinimum": 0.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
}
}
],
// SMOOTHING CONFIG
"smoothing" :
{
"type" : "linear",
"time_ms" : 200,
"updateFrequency" : 20.0000,
"updateDelay" : 0
}
},
// NO V4L2 GRABBER CONFIG
// FRAME GRABBER CONFIG
"framegrabber" :
{
"width" : 64,
"height" : 64,
"frequency_Hz" : 10.0,
"priority" : 890
},
// BLACKBORDER CONFIG
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.0,
"unknownFrameCnt" : 600,
"borderFrameCnt" : 50,
"maxInconsistentCnt" : 10,
"blurRemoveCnt" : 1,
"mode" : "default"
},
// BOOTEFFECT CONFIG
"bootsequence" :
{
"color" : [0,0,0],
"effect" : "Rainbow swirl fast",
"duration_ms" : 3000,
"priority" : 700
},
// JSON SERVER CONFIG
"jsonServer" :
{
"port" : 19444
},
// PROTO SERVER CONFIG
"protoServer" :
{
"port" : 19445
},
// EFFECT PATH
"effects" :
{
"paths" :
[
"/storage/hyperion/effects",
"/usr/share/hyperion/effects"
]
},
// NO KODI CHECK CONFIG
// NO BOBLIGHT SERVER CONFIG
// NO JSON/PROTO FORWARD CONFIG
// LED CONFIGURATION
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.6471, "maximum" : 0.6765 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.6765, "maximum" : 0.7059 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 2,
"hscan" : { "minimum" : 0.7059, "maximum" : 0.7353 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 3,
"hscan" : { "minimum" : 0.7353, "maximum" : 0.7647 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 4,
"hscan" : { "minimum" : 0.7647, "maximum" : 0.7941 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 5,
"hscan" : { "minimum" : 0.7941, "maximum" : 0.8235 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 6,
"hscan" : { "minimum" : 0.8235, "maximum" : 0.8529 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 7,
"hscan" : { "minimum" : 0.8529, "maximum" : 0.8824 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 8,
"hscan" : { "minimum" : 0.8824, "maximum" : 0.9118 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 9,
"hscan" : { "minimum" : 0.9118, "maximum" : 0.9412 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 10,
"hscan" : { "minimum" : 0.9412, "maximum" : 0.9706 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 11,
"hscan" : { "minimum" : 0.9706, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 12,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9444, "maximum" : 1.0000 }
},
{
"index" : 13,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8889, "maximum" : 0.9444 }
},
{
"index" : 14,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8333, "maximum" : 0.8889 }
},
{
"index" : 15,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7778, "maximum" : 0.8333 }
},
{
"index" : 16,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7222, "maximum" : 0.7778 }
},
{
"index" : 17,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6667, "maximum" : 0.7222 }
},
{
"index" : 18,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6111, "maximum" : 0.6667 }
},
{
"index" : 19,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5556, "maximum" : 0.6111 }
},
{
"index" : 20,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5556 }
},
{
"index" : 21,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4444, "maximum" : 0.5000 }
},
{
"index" : 22,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3889, "maximum" : 0.4444 }
},
{
"index" : 23,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3333, "maximum" : 0.3889 }
},
{
"index" : 24,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2778, "maximum" : 0.3333 }
},
{
"index" : 25,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2222, "maximum" : 0.2778 }
},
{
"index" : 26,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1667, "maximum" : 0.2222 }
},
{
"index" : 27,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1111, "maximum" : 0.1667 }
},
{
"index" : 28,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0556, "maximum" : 0.1111 }
},
{
"index" : 29,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0556 }
},
{
"index" : 30,
"hscan" : { "minimum" : 0.9706, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 31,
"hscan" : { "minimum" : 0.9412, "maximum" : 0.9706 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 32,
"hscan" : { "minimum" : 0.9118, "maximum" : 0.9412 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 33,
"hscan" : { "minimum" : 0.8824, "maximum" : 0.9118 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 34,
"hscan" : { "minimum" : 0.8529, "maximum" : 0.8824 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 35,
"hscan" : { "minimum" : 0.8235, "maximum" : 0.8529 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 36,
"hscan" : { "minimum" : 0.7941, "maximum" : 0.8235 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 37,
"hscan" : { "minimum" : 0.7647, "maximum" : 0.7941 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 38,
"hscan" : { "minimum" : 0.7353, "maximum" : 0.7647 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 39,
"hscan" : { "minimum" : 0.7059, "maximum" : 0.7353 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 40,
"hscan" : { "minimum" : 0.6765, "maximum" : 0.7059 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 41,
"hscan" : { "minimum" : 0.6471, "maximum" : 0.6765 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 42,
"hscan" : { "minimum" : 0.6176, "maximum" : 0.6471 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 43,
"hscan" : { "minimum" : 0.5882, "maximum" : 0.6176 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 44,
"hscan" : { "minimum" : 0.5588, "maximum" : 0.5882 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 45,
"hscan" : { "minimum" : 0.5294, "maximum" : 0.5588 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 46,
"hscan" : { "minimum" : 0.5000, "maximum" : 0.5294 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 47,
"hscan" : { "minimum" : 0.4706, "maximum" : 0.5000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 48,
"hscan" : { "minimum" : 0.4412, "maximum" : 0.4706 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 49,
"hscan" : { "minimum" : 0.4118, "maximum" : 0.4412 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 50,
"hscan" : { "minimum" : 0.3824, "maximum" : 0.4118 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 51,
"hscan" : { "minimum" : 0.3529, "maximum" : 0.3824 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 52,
"hscan" : { "minimum" : 0.3235, "maximum" : 0.3529 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 53,
"hscan" : { "minimum" : 0.2941, "maximum" : 0.3235 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 54,
"hscan" : { "minimum" : 0.2647, "maximum" : 0.2941 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 55,
"hscan" : { "minimum" : 0.2353, "maximum" : 0.2647 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 56,
"hscan" : { "minimum" : 0.2059, "maximum" : 0.2353 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 57,
"hscan" : { "minimum" : 0.1765, "maximum" : 0.2059 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 58,
"hscan" : { "minimum" : 0.1471, "maximum" : 0.1765 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 59,
"hscan" : { "minimum" : 0.1176, "maximum" : 0.1471 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 60,
"hscan" : { "minimum" : 0.0882, "maximum" : 0.1176 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 61,
"hscan" : { "minimum" : 0.0588, "maximum" : 0.0882 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 62,
"hscan" : { "minimum" : 0.0294, "maximum" : 0.0588 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 63,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0294 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 64,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0556 }
},
{
"index" : 65,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0556, "maximum" : 0.1111 }
},
{
"index" : 66,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1111, "maximum" : 0.1667 }
},
{
"index" : 67,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1667, "maximum" : 0.2222 }
},
{
"index" : 68,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2222, "maximum" : 0.2778 }
},
{
"index" : 69,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2778, "maximum" : 0.3333 }
},
{
"index" : 70,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3333, "maximum" : 0.3889 }
},
{
"index" : 71,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3889, "maximum" : 0.4444 }
},
{
"index" : 72,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4444, "maximum" : 0.5000 }
},
{
"index" : 73,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5000, "maximum" : 0.5556 }
},
{
"index" : 74,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5556, "maximum" : 0.6111 }
},
{
"index" : 75,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6111, "maximum" : 0.6667 }
},
{
"index" : 76,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6667, "maximum" : 0.7222 }
},
{
"index" : 77,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7222, "maximum" : 0.7778 }
},
{
"index" : 78,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7778, "maximum" : 0.8333 }
},
{
"index" : 79,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8333, "maximum" : 0.8889 }
},
{
"index" : 80,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8889, "maximum" : 0.9444 }
},
{
"index" : 81,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9444, "maximum" : 1.0000 }
},
{
"index" : 82,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0294 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 83,
"hscan" : { "minimum" : 0.0294, "maximum" : 0.0588 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 84,
"hscan" : { "minimum" : 0.0588, "maximum" : 0.0882 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 85,
"hscan" : { "minimum" : 0.0882, "maximum" : 0.1176 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 86,
"hscan" : { "minimum" : 0.1176, "maximum" : 0.1471 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 87,
"hscan" : { "minimum" : 0.1471, "maximum" : 0.1765 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 88,
"hscan" : { "minimum" : 0.1765, "maximum" : 0.2059 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 89,
"hscan" : { "minimum" : 0.2059, "maximum" : 0.2353 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 90,
"hscan" : { "minimum" : 0.2353, "maximum" : 0.2647 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 91,
"hscan" : { "minimum" : 0.2647, "maximum" : 0.2941 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 92,
"hscan" : { "minimum" : 0.2941, "maximum" : 0.3235 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 93,
"hscan" : { "minimum" : 0.3235, "maximum" : 0.3529 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 94,
"hscan" : { "minimum" : 0.3529, "maximum" : 0.3824 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
}
/// The configuration of the boblight server which enables the boblight remote interface
/// * port : Port at which the boblight server is started
"boblightServer" :
{
"port" : 19333
},
],
"endOfJson" : "endOfJson"
}
und hier die boblight.conf (vom Sat Receiver);
Spoiler anzeigen
[global]
interface 127.0.0.1
port19333
[device]
nameambilight
output /dev/ttyUSB0
type atmo
channels 289
interval 16000
rate 38400
#debug off
[color]
name red
rgb FF0000
gamma 0.91
adjust 1.0
blacklevel 0.0
[color]
name green
rgb 00FF00
gamma 0.86
adjust 0.96
blacklevel 0.0
[color]
name blue
rgb 0000FF
gamma 0.95
adjust 0.80
blacklevel 0.0
[light] #bottom-right
name 1XX
color red ambilight 4
color green ambilight 5
color blue ambilight 6
hscan 44.0 41.06
vscan 90.0 100
[light] #bottom-right
name 2XX
color red ambilight 7
color green ambilight 8
color blue ambilight 9
hscan 41.06 38.12
vscan 90.0 100
[light] #bottom-right
name 3XX
color red ambilight 10
color green ambilight 11
color blue ambilight 12
hscan 38.12 35.18
vscan 90.0 100
[light] #bottom-right
name 4XX
color red ambilight 13
color green ambilight 14
color blue ambilight 15
hscan 35.18 32.24
vscan 90.0 100
[light] #bottom-right
name 5XX
color red ambilight 16
color green ambilight 17
color blue ambilight 18
hscan 32.24 29.29
vscan 90.0 100
[light] #bottom-right
name 6XX
color red ambilight 19
color green ambilight 20
color blue ambilight 21
hscan 29.29 26.35
vscan 90.0 100
[light] #bottom-right
name 7XX
color red ambilight 22
color green ambilight 23
color blue ambilight 24
hscan 26.35 23.41
vscan 90.0 100
[light] #bottom-right
name 8XX
color red ambilight 25
color green ambilight 26
color blue ambilight 27
hscan 23.41 20.47
vscan 90.0 100
[light] #bottom-right
name 9XX
color red ambilight 28
color green ambilight 29
color blue ambilight 30
hscan 20.47 17.53
vscan 90.0 100
[light] #right
name 10X
color red ambilight 31
color green ambilight 32
color blue ambilight 33
hscan 90.0 100
vscan 94.44 100.0
[light] #right
name 11X
color red ambilight 34
color green ambilight 35
color blue ambilight 36
hscan 90.0 100
vscan 88.89 94.44
[light] #right
name 12X
color red ambilight 37
color green ambilight 38
color blue ambilight 39
hscan 90.0 100
vscan 83.33 88.89
[light] #right
name 13X
color red ambilight 40
color green ambilight 41
color blue ambilight 42
hscan 90.0 100
vscan 77.78 83.33
[light] #right
name 14X
color red ambilight 43
color green ambilight 44
color blue ambilight 45
hscan 90.0 100
vscan 72.22 77.78
[light] #right
name 15X
color red ambilight 46
color green ambilight 47
color blue ambilight 48
hscan 90.0 100
vscan 66.67 72.22
[light] #right
name 16X
color red ambilight 49
color green ambilight 50
color blue ambilight 51
hscan 90.0 100
vscan 61.11 66.67
[light] #right
name 17X
color red ambilight 52
color green ambilight 53
color blue ambilight 54
hscan 90.0 100
vscan 55.56 61.11
[light] #right
name 18X
color red ambilight 55
color green ambilight 56
color blue ambilight 57
hscan 90.0 100
vscan 50.0 55.56
[light] #right
name 19X
color red ambilight 58
color green ambilight 59
color blue ambilight 60
hscan 90.0 100
vscan 44.44 50.0
[light] #right
name 20X
color red ambilight 61
color green ambilight 62
color blue ambilight 63
hscan 90.0 100
vscan 38.89 44.44
[light] #right
name 21X
color red ambilight 64
color green ambilight 65
color blue ambilight 66
hscan 90.0 100
vscan 33.33 38.89
[light] #right
name 22X
color red ambilight 67
color green ambilight 68
color blue ambilight 69
hscan 90.0 100
vscan 27.78 33.33
[light] #right
name 23X
color red ambilight 70
color green ambilight 71
color blue ambilight 72
hscan 90.0 100
vscan 22.22 27.78
[light] #right
name 24X
color red ambilight 73
color green ambilight 74
color blue ambilight 75
hscan 90.0 100
vscan 16.67 22.22
[light] #top
name 25X
color red ambilight 76
color green ambilight 77
color blue ambilight 78
hscan 97.06 100.0
vscan 0 10
[light] #top
name 26X
color red ambilight 79
color green ambilight 80
color blue ambilight 81
hscan 94.12 97.06
vscan 0 10
[light] #top
name 27X
color red ambilight 82
color green ambilight 83
color blue ambilight 84
hscan 91.18 94.12
vscan 0 10
[light] #top
name 28X
color red ambilight 85
color green ambilight 86
color blue ambilight 87
hscan 88.24 91.18
vscan 0 10
[light] #top
name 29X
color red ambilight 88
color green ambilight 89
color blue ambilight 90
hscan 85.29 88.24
vscan 0 10
[light] #top
name 30X
color red ambilight 91
color green ambilight 92
color blue ambilight 93
hscan 82.35 85.29
vscan 0 10
[light] #top
name 31X
color red ambilight 94
color green ambilight 95
color blue ambilight 96
hscan 79.41 82.35
vscan 0 10
[light] #top
name 32X
color red ambilight 97
color green ambilight 98
color blue ambilight 99
hscan 76.47 79.41
vscan 0 10
[light] #top
name 33X
color red ambilight 100
color green ambilight 101
color blue ambilight 102
hscan 73.53 76.47
vscan 0 10
[light] #top
name 34X
color red ambilight 103
color green ambilight 104
color blue ambilight 105
hscan 70.59 73.53
vscan 0 10
[light] #top
name 35X
color red ambilight 106
color green ambilight 107
color blue ambilight 108
hscan 67.65 70.59
vscan 0 10
[light] #top
name 36X
color red ambilight 109
color green ambilight 110
color blue ambilight 111
hscan 64.71 67.65
vscan 0 10
[light] #top
name 37X
color red ambilight 112
color green ambilight 113
color blue ambilight 114
hscan 61.76 64.71
vscan 0 10
[light] #top
name 38X
color red ambilight 115
color green ambilight 116
color blue ambilight 117
hscan 58.82 61.76
vscan 0 10
[light] #top
name 39X
color red ambilight 118
color green ambilight 119
color blue ambilight 120
hscan 55.88 58.82
vscan 0 10
[light] #top
name 40X
color red ambilight 121
color green ambilight 122
color blue ambilight 123
hscan 52.94 55.88
vscan 0 10
[light] #top
name 41X
color red ambilight 124
color green ambilight 125
color blue ambilight 126
hscan 50.0 52.94
vscan 0 10
[light] #top
name 42X
color red ambilight 127
color green ambilight 128
color blue ambilight 129
hscan 47.06 50.0
vscan 0 10
[light] #top
name 43X
color red ambilight 130
color green ambilight 131
color blue ambilight 132
hscan 44.12 47.06
vscan 0 10
[light] #top
name 44X
color red ambilight 133
color green ambilight 134
color blue ambilight 135
hscan 41.18 44.12
vscan 0 10
[light] #top
name 45X
color red ambilight 136
color green ambilight 137
color blue ambilight 138
hscan 38.24 41.18
vscan 0 10
[light] #top
name 46X
color red ambilight 139
color green ambilight 140
color blue ambilight 141
hscan 35.29 38.24
vscan 0 10
[light] #top
name 47X
color red ambilight 142
color green ambilight 143
color blue ambilight 144
hscan 32.35 35.29
vscan 0 10
[light] #top
name 48X
color red ambilight 145
color green ambilight 146
color blue ambilight 147
hscan 29.41 32.35
vscan 0 10
[light] #top
name 49X
color red ambilight 148
color green ambilight 149
color blue ambilight 150
hscan 26.47 29.41
vscan 0 10
[light] #top
name 50X
color red ambilight 151
color green ambilight 152
color blue ambilight 153
hscan 23.53 26.47
vscan 0 10
[light] #top
name 51X
color red ambilight 154
color green ambilight 155
color blue ambilight 156
hscan 20.59 23.53
vscan 0 10
[light] #top
name 52X
color red ambilight 157
color green ambilight 158
color blue ambilight 159
hscan 17.65 20.59
vscan 0 10
[light] #top
name 53X
color red ambilight 160
color green ambilight 161
color blue ambilight 162
hscan 14.71 17.65
vscan 0 10
[light] #top
name 54X
color red ambilight 163
color green ambilight 164
color blue ambilight 165
hscan 11.76 14.71
vscan 0 10
[light] #top
name 55X
color red ambilight 166
color green ambilight 167
color blue ambilight 168
hscan 8.82 11.76
vscan 0 10
[light] #left
name 56X
color red ambilight 169
color green ambilight 170
color blue ambilight 171
hscan 0 10
vscan 0.0 5.56
[light] #left
name 57X
color red ambilight 172
color green ambilight 173
color blue ambilight 174
hscan 0 10
vscan 5.56 11.11
[light] #left
name 58X
color red ambilight 175
color green ambilight 176
color blue ambilight 177
hscan 0 10
vscan 11.11 16.67
[light] #left
name 59X
color red ambilight 178
color green ambilight 179
color blue ambilight 180
hscan 0 10
vscan 16.67 22.22
[light] #left
name 60X
color red ambilight 181
color green ambilight 182
color blue ambilight 183
hscan 0 10
vscan 22.22 27.78
[light] #left
name 61X
color red ambilight 184
color green ambilight 185
color blue ambilight 186
hscan 0 10
vscan 27.78 33.33
[light] #left
name 62X
color red ambilight 187
color green ambilight 188
color blue ambilight 189
hscan 0 10
vscan 33.33 38.89
[light] #left
name 63X
color red ambilight 190
color green ambilight 191
color blue ambilight 192
hscan 0 10
vscan 38.89 44.44
[light] #left
name 64X
color red ambilight 193
color green ambilight 194
color blue ambilight 195
hscan 0 10
vscan 44.44 50.0
[light] #left
name 65X
color red ambilight 196
color green ambilight 197
color blue ambilight 198
hscan 0 10
vscan 50.0 55.56
[light] #left
name 66X
color red ambilight 199
color green ambilight 200
color blue ambilight 201
hscan 0 10
vscan 55.56 61.11
[light] #left
name 67X
color red ambilight 202
color green ambilight 203
color blue ambilight 204
hscan 0 10
vscan 61.11 66.67
[light] #left
name 68X
color red ambilight 205
color green ambilight 206
color blue ambilight 207
hscan 0 10
vscan 66.67 72.22
[light] #left
name 69X
color red ambilight 208
color green ambilight 209
color blue ambilight 210
hscan 0 10
vscan 72.22 77.78
[light] #left
name 70X
color red ambilight 211
color green ambilight 212
color blue ambilight 213
hscan 0 10
vscan 77.78 83.33
[light] #bottom-left
name 71X
color red ambilight 214
color green ambilight 215
color blue ambilight 216
hscan 0.0 2.94
vscan 90.0 100
[light] #bottom-left
name 72X
color red ambilight 217
color green ambilight 218
color blue ambilight 219
hscan 2.94 5.88
vscan 90.0 100
[light] #bottom-left
name 73X
color red ambilight 220
color green ambilight 221
color blue ambilight 222
hscan 5.88 8.82
vscan 90.0 100
[light] #bottom-left
name 74X
color red ambilight 223
color green ambilight 224
color blue ambilight 225
hscan 8.82 11.76
vscan 90.0 100
[light] #bottom-left
name 75X
color red ambilight 226
color green ambilight 227
color blue ambilight 228
hscan 11.76 14.71
vscan 90.0 100
[light] #bottom-left
name 76X
color red ambilight 229
color green ambilight 230
color blue ambilight 231
hscan 14.71 17.65
vscan 90.0 100
[light] #bottom-left
name 77X
color red ambilight 232
color green ambilight 233
color blue ambilight 234
hscan 17.65 20.59
vscan 90.0 100
[light] #bottom-left
name 78X
color red ambilight 235
color green ambilight 236
color blue ambilight 237
hscan 20.59 23.53
vscan 90.0 100
[light] #bottom-left
name 79X
color red ambilight 238
color green ambilight 239
color blue ambilight 240
hscan 23.53 26.47
vscan 90.0 100
[light] #bottom-left
name 80X
color red ambilight 241
color green ambilight 242
color blue ambilight 243
hscan 26.47 29.41
vscan 90.0 100
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von example ()
-
Hab´ eben gesehen, dass du ja umstellen willst. Boblight bzw. die Solo2 soll ja jetzt grabben. Das kannst du vergessen. Das funktioniert seit ein paar Wochen mit dem 11er Image nicht (mehr). Da ist wohl irgendwas mal upgedatet worden, dass das nicht mehr geht. Zumindest hab´ ich´s nicht hingekriegt. Das hatte ich ja oben auch geschrieben.
Sorry, hab´ das eben anscheinend erst richtig gelesen.
Probier´s mal mit enigmalight.
Edit: Das, was aber noch funktioniert, ist das Ein-und Ausschalten mit Boblight. Aber grabben und die LED-Steuerung übernimmt immer noch der Pi. Dafür muss deine boblight.conf nur das hier beinhalten:
Spoiler anzeigen
[global]
interface xxx.xxx.xxx.xxx (IP des Pi´s)
port 19333
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von HomeCoach ()
-
Ich verwende als Receiver-Image die Version: 9.0.3...
Enigmalight habe ich auch schon installiert. Allerdings finde ich die Benutzeroberfläche noch 10x schwieriger als die von boblight.
Die bekomme ich niemals konfiguriert. Und ob beides kompatibel ist, weiß ich auch nicht.
Die Änderung der IP in der Datei: bolight.conf führte leider nicht zum Erfolg.
Ich habe die IP meine PIs eingeben (192.168.178.8).
Die LED lässt sich ebenfalls nicht steuern, nicht ein oder aus.
Sobald ich diese versuche ein - oder auszuschalten - kommt die Fehlermeldung, dass die boblicht.conf nicht vorhanden ist in etc.
Obwohl vorhanden, da diese Datei eben editiert.Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von example ()
-
Probier´s mal als Basis mit meiner alten boblight.conf von einem Karatelight 16. Die hat bis vor ein paar Wochen noch funktioniert.
Spoiler anzeigen
#[global]
#interface 127.0.0.1
#port 19333
[device]
name ambilight
output /dev/ttyACM0
type karate
channels 48
interval 16000
rate 57600
#debug off
[color]
name red
rgb 00FF00
gamma 0.91
adjust 1.0
blacklevel 0.0
[color]
name green
rgb 0000FF
gamma 0.86
adjust 1.0
blacklevel 0.0
[color]
name blue
rgb FF0000
gamma 0.95
adjust 1.0
blacklevel 0.0
[light] #left
name 1XX
color red ambilight 1
color green ambilight 2
color blue ambilight 3
hscan 0 15
vscan 66.67 100.0
[light] #left
name 2XX
color red ambilight 4
color green ambilight 5
color blue ambilight 6
hscan 0 15
vscan 33.33 66.67
[light] #left
name 3XX
color red ambilight 7
color green ambilight 8
color blue ambilight 9
hscan 0 15
vscan 0.0 33.33
[light] #top
name 4XX
color red ambilight 10
color green ambilight 11
color blue ambilight 12
hscan 0.0 20.0
vscan 0 15
[light] #top
name 5XX
color red ambilight 13
color green ambilight 14
color blue ambilight 15
hscan 20.0 40.0
vscan 0 15
[light] #top
name 6XX
color red ambilight 16
color green ambilight 17
color blue ambilight 18
hscan 40.0 60.0
vscan 0 15
[light] #top
name 7XX
color red ambilight 19
color green ambilight 20
color blue ambilight 21
hscan 60.0 80.0
vscan 0 15
[light] #top
name 8XX
color red ambilight 22
color green ambilight 23
color blue ambilight 24
hscan 80.0 100.0
vscan 0 15
[light] #right
name 9XX
color red ambilight 25
color green ambilight 26
color blue ambilight 27
hscan 85.0 100
vscan 0.0 33.33
[light] #right
name 10X
color red ambilight 28
color green ambilight 29
color blue ambilight 30
hscan 85.0 100
vscan 33.33 66.67
[light] #right
name 11X
color red ambilight 31
color green ambilight 32
color blue ambilight 33
hscan 85.0 100
vscan 66.67 100.0
[light] #bottom
name 12X
color red ambilight 34
color green ambilight 35
color blue ambilight 36
hscan 80.0 100.0
vscan 85.0 100
[light] #bottom
name 13X
color red ambilight 37
color green ambilight 38
color blue ambilight 39
hscan 60.0 80.0
vscan 85.0 100
[light] #bottom
name 14X
color red ambilight 40
color green ambilight 41
color blue ambilight 42
hscan 40.0 60.0
vscan 85.0 100
[light] #bottom
name 15X
color red ambilight 43
color green ambilight 44
color blue ambilight 45
hscan 20.0 40.0
vscan 85.0 100
[light] #bottom
name 16X
color red ambilight 46
color green ambilight 47
color blue ambilight 48
hscan 0.0 20.0
vscan 85.0 100
Hab auch gerade einen Fehler in deiner boblight.conf gefunden. Zwischen "name" und "ambilight" fehlt der Tab bzw. ein Leerzeichen.
[device]
nameambilight
output /dev/ttyUSB0
type atmo
channels 289
interval 16000
Und noch ein Leerzeichen fehlt. Zwischen "port" und "19333":
[global]
interface 127.0.0.1
port19333Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von HomeCoach ()
-
Leider fehlen die Leerzeichen nur in der Verlinkung. In der Original-Datei sind diese vorhanden.
Ich kann dir leider nicht sagen, warum es es hier nicht richtig darstellt.
-> siehe Anhang.
Ich habe deine boblight.conf einmal verwendet (meine eigene überschrieben und nur noch die IP Adresse angeglichen).
Was bei deiner boblight.conf nicht verstehe: Du hast vor der IP und dem Port ein # - ich nicht und deine IP ist ebenfalls die Standart-IP 127.x.x.x
Aber deine conf funktioniert leider auch nicht. Diese beschi**ene Anwendung meckert natürlich wieder rum, dass die "boblight.conf in etc nicht vorhanden ist.
Diese Datei ist vorhanden - siehe Bild 2.Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von example ()
-
Kurz zum Verständnis:
Meine config ist für ein Karatelight 16. Das wird komplett mit Boblight gesteuert. Der Abschnitt "global" in der boblight.conf wird nur benötigt, wenn du mit Boblight ein anderes, externes Ambilight-System mit Bildinformationen füttern und an- und ausschalten willst, wie z.B. den Raspberry mit Hyperion.
Du willst ja, dass Boblight das Grabben und der Pi die Steuerung der LEDs übernimmt. Also muss der Abschnitt bei dir aktiviert werden und in der hyperion.config.json der Grabber deaktiviert werden, weil das ja Boblight übernimmt. Alles andere bleibt in der .json aktiv.
Boblight grabbt das TV-Bild und schickt die Bildinformationen per Netzwerk direkt an Hyperion am Raspberry. Hyperion wiederum schaltet dann die LEDs entsprechend.
Edit: Was die Meldung über die "nicht vorhandene boblight.conf" angeht: Spiel mal mit den Rechten der Datei und/oder speicher mal die config mit dem config-Editor in Boblight ab. Dann gibt´s zwar bei der 0.8r5 und 0.8r6 nen Crash, aber so hab´ ich diese Meldung mal weg bekommen. Oder probier ne ältere Version, wo der config-Editor nicht crasht.
Wenn das alles nix hilft, bleibt nur enigmalightDieser Beitrag wurde bereits 1 mal editiert, zuletzt von HomeCoach ()
-
Guten Morgen erstmal vielen Dank für Deine Aufklärung.
Also belasse ich dies so und aktiviere die Funktion in der global.
Ich habe gestern einmal mit der Version 05r10 gespielt. Diese konnte ich auch problemlos installieren, allerdings habe ich dort kein Eingabefeld für meine Netzwerkadresse vom Pi. Dies habe ich dann anhand der Datei konfiguriert.
Aber gebracht hat dies leider auch nichts.
Zu erwähnen wäre vielleicht noch, dass ich auch mal versucht habe, die boblight auf einen anderen Enigma 2 Receiver zu installieren.
Dort erhielt ich ebenfalls eine Fehlermeldung, dass die Datei fehlt. Auch dort lief die ältere Version ohne Fehlermeldung, allerdings lies sich dort auch wieder nicht die IP-Adresse über die Benutzeroberfläche ändern, sondern nur manuell.
Ich bin schon am Überlegen mir einen normalen Grabber zu bestellen. Allerdings widerstrebt mir dies etwas, für Dinge Geld auszugeben, die normalerweise der Receiver auch bewerkstelligen könnte.
Ich gehe jetzt erstmal auf Arbeit und würde die Ergebnisse heute Nachmittag mitteilen. -
Nimm enigmalight. Ist garnicht so schwierig einzurichten. Du machst dir einfach einfach config für Boblight oder nimmst deine vorhandene und machst manuell ein paar Änderungen. Wenn du Hilfe brauchst, schreibst du am besten im enigmalight-Thread. Boblight ist eh´ tot bzw. wird nicht mehr supportet (wie man an der regen Beteiligung hier sieht ).
Zumal der Boblight-Grabber beim aktuellen Image eh´ nicht mehr läuft.Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von HomeCoach ()