Enigmalight - eine Neuerung? ( Vorstellungs- und Supportthread )

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Habe seit heute Karatelight mit 8 Kanälen und folgendes Problem:
      Sobald ich im Config Editor das richtige Device einstellen will, bekomme ich einen Bluescreen.
      Habe dann über PuTTY die Datei /etc/enigmalight.conf entsprechend bearbeitet:

      Quellcode

      1. [global]
      2. interface 127.0.0.1
      3. port 19333
      5. [device]
      6. name ambilight
      7. output /dev/ttyACM0
      8. type karate
      9. interval 16000


      Aber im Config Editor wird mir immer noch /dev/ttyUSB0 angezeigt.

      Wie ändert man diesen Eintrag im Config Editor, ohne dass mir die Box abstürzt?

      PS: Mit dem Karate/Atmolight-Plugin funktionieren die Lampen.

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von fluXXXion ()

    • Ich hab's auch schon per ftp versucht (also config-Datei auf den PC kopiert, da mit Notepad++ editiert, zurückkopiert auf die Box), trotzdem beharrt das Plugin auf ttyUSB0.



    • /etc/enigmalight.config:

      Spoiler anzeigen

      [global]
      interface 127.0.0.1
      port 19333

      [device]
      name ambilight
      output /dev/ttyACM0
      type karate
      interval 16000

      channels 24
      rate 57600
      debug off

      [color]
      name red
      rgb 0000FF
      gamma 0.91
      adjust 1.0
      blacklevel 0.0

      [color]
      name green
      rgb 00FF00
      gamma 0.86
      adjust 0.96
      blacklevel 0.0

      [color]
      name blue
      rgb FF0000
      gamma 0.95
      adjust 0.80
      blacklevel 0.0



      [light]
      position top
      name 1XX
      color red ambilight 1
      color green ambilight 2
      color blue ambilight 3
      hscan 0.0 25.0
      vscan 0 10


      [light]
      position top
      name 2XX
      color red ambilight 4
      color green ambilight 5
      color blue ambilight 6
      hscan 25.0 50.0
      vscan 0 10


      [light]
      position top
      name 3XX
      color red ambilight 7
      color green ambilight 8
      color blue ambilight 9
      hscan 50.0 75.0
      vscan 0 10


      [light]
      position top
      name 4XX
      color red ambilight 10
      color green ambilight 11
      color blue ambilight 12
      hscan 75.0 100.0
      vscan 0 10


      [light]
      position bottom
      name 5XX
      color red ambilight 13
      color green ambilight 14
      color blue ambilight 15
      hscan 75.0 100.0
      vscan 90.0 100


      [light]
      position bottom
      name 6XX
      color red ambilight 16
      color green ambilight 17
      color blue ambilight 18
      hscan 50.0 75.0
      vscan 90.0 100


      [light]
      position bottom
      name 7XX
      color red ambilight 19
      color green ambilight 20
      color blue ambilight 21
      hscan 25.0 50.0
      vscan 90.0 100


      [light]
      position bottom
      name 8XX
      color red ambilight 22
      color green ambilight 23
      color blue ambilight 24
      hscan 0.0 25.0
      vscan 90.0 100


      /home/elight-addons/.enigmalight/enigmalight.log:

      Spoiler anzeigen

      18:15:51.372536 [InitLog] start of log /home/elight-addons/.enigmalight/enigmalight.log
      18:15:51.374360 [CConfig::LoadConfigFromFile] Opening /etc/enigmalight.conf
      18:15:51.378398 [CConfig::CheckConfig] checking config lines
      18:15:51.383896 [CConfig::CheckConfig] config lines valid
      18:15:51.387825 [CConfig::LoadConfigFromFile] Opening /etc/enigmalight.conf
      18:15:51.391511 [CConfig::BuildConfig] building config
      18:15:51.398694 [CConfig::BuildConfig] built config successfully
      18:15:51.400023 [main] Start device 1 from 1
      18:15:51.401588 [CDevice::Process] ambilight: starting with output "/dev/ttyUSB0"
      18:15:51.403068 [CDevice::Process] ambilight: setting up
      18:15:51.405081 [CEnigmaLight::SetColorSequence] Set colorsequence to RGB
      18:15:51.406353 [CGuiServer::Process] Start GuiServer
      18:15:51.407627 [CDeviceRS232::OpenSerialPort] ERROR: ambilight: /dev/ttyUSB0: open() No such file or directory
      18:15:51.408836 [CDevice::Process] ERROR: ambilight: setting up failed...
      18:15:51.410150 [CDevice::Process] Exiting EnigmaLight...


      crashlog:

      Spoiler anzeigen

      <?xml version="1.0" encoding="utf-8"?>
      <stbcrashlog>
      <dvbapp2>
      <crashdate>Tue Feb 24 18:43:28 2015</crashdate>
      <compiledate>Feb 16 2015</compiledate>
      <skin>AtileHD/skin.xml</skin>
      <sourcedate>2015-02-16</sourcedate>
      <branch>vti-master</branch>
      </dvbapp2>
      <image>
      <stbmodel>duo2</stbmodel>
      <kernelcmdline>libata.force=1:1.5Gbps bmem=192M@64M bmem=220M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
      <nimsockets>NIM Socket 0:</nimsockets>
      <vtiversion>8.0.0</vtiversion>
      <imageversion>
      <![CDATA[
      version=1000201407171317
      comment=vuplus
      target=9
      creator=VTi <info@vuplus-support.org>
      url=http://www.vuplus-support.org/
      catalog=http://www.vuplus-support.org
      ]]>
      </imageversion>
      </image>
      <software>
      <dvbapp2software>
      <![CDATA[
      enigma2 - vti-8.0.0-20150216-r0
      enigma2-data-enigma2 - vti-8.0.0-20141121-r0
      enigma2-data-fonts - vti-8.0.0-20141121-r0
      enigma2-data-keymaps - vti-8.0.0-20141121-r0
      enigma2-data-meta - vti-8.0.0-20141121-r0
      enigma2-data-spinner - vti-8.0.0-20141121-r0
      enigma2-data-xml - vti-8.0.0-20141121-r0
      enigma2-defaultservices - 1.0-r8-vti1
      enigma2-locale-de - vti-8.0.0-20150216-r0
      enigma2-locale-en - vti-8.0.0-20141121-r0
      enigma2-plugin-cams-cccam.2.3.0 - 1.0-r0
      enigma2-plugin-extensions-addstreamurl - 1.0-e2openpluginsgit20120411-r0
      enigma2-plugin-extensions-atilehd - 2.5-r1
      enigma2-plugin-extensions-atmolightd - 0.7-pre22
      enigma2-plugin-extensions-cdinfo - experimental-git20141121-r0
      enigma2-plugin-extensions-cooltvguide - Coolman_V7.3.0
      enigma2-plugin-extensions-cutlisteditor - vti-8.0.0-20141121-r0
      enigma2-plugin-extensions-dlnabrowser - vti-8.0.0-20141121-r0
      enigma2-plugin-extensions-dlnaserver - vti-8.0.0-20141121-r0
      enigma2-plugin-extensions-dvdplayer - vti-8.0.0-20141121-r0
      enigma2-plugin-extensions-enhancedmoviecenter - 3.7.0beta20141104-r0
      enigma2-plugin-extensions-enigmalight - 0.2-rc1
      enigma2-plugin-extensions-epgrefresh - experimental-git20141121-r0
      enigma2-plugin-extensions-epgsearch - experimental-git20141121-r0
      enigma2-plugin-extensions-fritzcall - experimental-git20141121-r0
      enigma2-plugin-extensions-graphmultiepg - vti-8.0.0-20141130-r2
      enigma2-plugin-extensions-hbbtv - vti-8.0.0-20150106-r0
      enigma2-plugin-extensions-imdb - experimental-git20141121-r0
      enigma2-plugin-extensions-lcd4linux - 4.2-r2.duo2edition.r0
      enigma2-plugin-extensions-mediaplayer - vti-8.0.0-20141121-r0
      enigma2-plugin-extensions-mediascanner - vti-8.0.0-20141121-r0
      enigma2-plugin-extensions-moviecut - experimental-git20141121-r0
      enigma2-plugin-extensions-movieretitle - experimental-git20141121-r0
      enigma2-plugin-extensions-multiquickbutton-vu - 2.7.14-r2
      enigma2-plugin-extensions-openwebif - 0.4.3-e2openpluginsgit20141125-r0
      enigma2-plugin-extensions-pictureplayer - vti-8.0.0-20141121-r0
      enigma2-plugin-extensions-remotechannelstreamconverter - 1.0-e2openpluginsgit20140106-r0
      enigma2-plugin-extensions-secondinfobar - 2.8-r1
      enigma2-plugin-extensions-streamtv - vti-8.0.0-20141121-r0
      enigma2-plugin-extensions-webbouqueteditor - experimental-git20141121-r0
      enigma2-plugin-extensions-webinterface - experimental-git20141121-r0
      enigma2-plugin-extensions-webradiofs - 12.86
      enigma2-plugin-extensions-zdfmediathek - experimental-git20141121-r0
      enigma2-plugin-skin-750s - vti-8.0.0-20140504-r1
      enigma2-plugin-skin-brushedalu-hd - vti-8.0.0-20140504-r1
      enigma2-plugin-skin-dmconcinnity-hd - vti-8.0.0-20140504-r1
      enigma2-plugin-skin-duo2-hd - 1.2
      enigma2-plugin-systemplugins-3gmodemmanager - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-autoresolution - experimental-git20141121-r0
      enigma2-plugin-systemplugins-autoshutdown - 0.6-r9
      enigma2-plugin-systemplugins-blindscan - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-commoninterfaceassignment - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-devicemanager2 - 1.4-r7
      enigma2-plugin-systemplugins-firmwareupgrade - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-hdmicec - 1.2-r9
      enigma2-plugin-systemplugins-hotplug - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-manualfancontrol - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-mphelp - experimental-git20141121-r0
      enigma2-plugin-systemplugins-networkbrowser - experimental-git20141121-r0
      enigma2-plugin-systemplugins-networkwizard - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-remotecontrolcode - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-skinselector - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-toolkit - experimental-git20141121-r0
      enigma2-plugin-systemplugins-transcodingsetup - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-ui3dsetup - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-uipositionsetup - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-vfdskinselector - 1.3-r3
      enigma2-plugin-systemplugins-videoenhancement - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-videomode - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-videotune - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-vps - experimental-git20141121-r0
      enigma2-plugin-systemplugins-wirelessaccesspoint - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-wirelesslan - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-wolsetup - vti-8.0.0-20141121-r0
      enigma2-plugin-systemplugins-zappingmodeselection - vti-8.0.0-20141121-r0
      enigma2-plugins-meta - experimental-git20141121-r0
      enigma2-python - vti-8.0.0-20150216-r0
      enigma2-skins-meta - vti-8.0.0-20140504-r1
      enigma2-streamproxy - 1.0+git15+37a3f19-r5
      enigma2-transtreamproxy - 2.0-r9-vti3+git36+074ccf7-r9-vti3
      task-vuplus-enigma2 - 1.0-r20.8-vti13
      ]]>
      </dvbapp2software>
      <gstreamersoftware>
      <![CDATA[
      gst-ffmpeg - 0.10.13-r4-vti1
      gst-plugin-dvbmediasink - 0.10+git130+9173821-r11-vti0
      gst-plugins-bad - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-cdxaparse - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-faad - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-fragmented - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-mms - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-mpegdemux - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-rtmp - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-vcdsrc - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-base - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-alsa - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-app - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-audioconvert - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-audioresample - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-decodebin - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-decodebin2 - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-ogg - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-playbin - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-subparse - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-typefindfunctions - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-vorbis - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-good - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-apetag - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-audioparsers - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-autodetect - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-avi - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-flac - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-flv - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-icydemux - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-id3demux - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-isomp4 - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-matroska - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-rtp - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-rtpmanager - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-rtsp - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-souphttpsrc - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-udp - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-wavparse - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-ugly - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-asf - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-cdio - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-dvdsub - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-mad - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-mpegaudioparse - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-mpegstream - 0.10.19.1+git4638+9afc696-r1
      gstreamer - 0.10.36.1+git12092+1bcabb9-r4
      libgstapp-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstaudio-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstcdda-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstinterfaces-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstnetbuffer-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstpbutils-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstriff-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstrtp-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstrtsp-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstsdp-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgsttag-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstvideo-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      ]]>
      </gstreamersoftware>
      </software>
      <crashlogs>
      <dvbapp2crashlog>
      <![CDATA[
      esolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      Activating keymap: Keyboard Deutsch
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      Activating language German
      language set to de_DE
      FIXME: request for unknown slot
      FIXME: request for unknown slot
      main thread is non-idle! display spinner!
      resolve: resolve ${datadir}/enigma2/setup.xml
      resolve: -> /usr/share/enigma2/setup.xml
      resolve: resolve ${libdir}
      resolve: -> /usr/lib
      [WebInterface] set language to de
      [WebInterface] set language to de
      [eTPM] connect error
      [WebInterface] fallback to default translation for Webinterface
      [LCD4linux] libusb found :-) 2015-02-16-vti-master
      /usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/EnhancedMovieCenter.png: 100x40x8 png, 2
      [AtmoLight] set language to [de]
      [AtmoLight] set language to [de]
      [AtmoLight] fallback to default translation for Layout
      [AtmoLight] fallback to default translation for Standby
      [AtmoLight] fallback to default translation for Tuning
      [AtmoLight] fallback to default translation for magenta
      [AtmoLight] fallback to default translation for cyan
      [AtmoLight] fallback to default translation for magenta
      [AtmoLight] fallback to default translation for cyan
      [MovieCut] set language to de
      [MovieCut] set language to de
      resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/MovieCut/bin/mcut
      resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/MovieCut/bin/mcut
      resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/vps/vps
      resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/vps/vps
      Reading satellites.xml
      resolve: resolve ${datadir}/enigma2/unicable.xml
      resolve: -> /usr/share/enigma2/unicable.xml
      removing internal link on frontend id 1
      sec config cleared
      setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(AVL2108), need rotorworkaround No, enabled Yes, DVB-S2 Yes, DVB-T2 No
      setSlotInfo for dvb frontend 1 to slotid 1, descr Vuplus DVB-S NIM(AVL2108), need rotorworkaround No, enabled Yes, DVB-S2 Yes, DVB-T2 No
      slot: 0 configmode: simple
      diseqcmode: diseqc_a_b
      slot: 1 configmode: equal
      sec config completed
      <ZappingModeSelection> set zapping mode : hold
      resolve: resolve ${datadir}/enigma2/
      resolve: -> /usr/share/enigma2/
      resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
      resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
      --> setting contrast to: 00008000
      --> setting saturation to: 00008000
      --> setting hue to: 00008000
      --> setting brightness to: 00008000
      --> setting block_noise_reduction to: 00000000
      --> setting mosquito_noise_reduction to: 00000000
      --> setting digital_contour_removal to: 00000000
      --> setting splitmode to: off
      --> setting sharpness to: 00000000
      --> setting auto_flesh to: 00000000
      --> setting green_boost to: 00000000
      --> setting blue_boost to: 00000000
      --> setting dynamic_contrast to: 00000000
      --> setting scaler_vertical_dejagging to: disable
      --> setting smooth to: disable
      --> applying pep values
      [UIPositionSetup] write dst_left : 0
      [UIPositionSetup] write dst_width : 720
      [UIPositionSetup] write dst_top : 0
      [UIPositionSetup] write dst_height : 576
      [DeviceManager2] Loading skin /usr/lib/enigma2/python/Plugins/SystemPlugins/DeviceManager2/skin.xml
      CIFSMOUNT {'username': 'root', 'sharedir': 'Harddisk', 'sharename': 'VUWZ', 'active': 'True', 'ip': '192.168.0.32', 'hdd_replacement': 'False', 'password': 'lopretnI3', 'isMounted': False, 'mounttype': 'cifs', 'options': 'rw'}
      CIFSMOUNT {'username': 'AlecTronic', 'sharedir': 'Video', 'sharename': 'QNAPVideo', 'active': 'True', 'ip': '192.168.0.200', 'hdd_replacement': 'False', 'password': 'lopretnI3', 'isMounted': False, 'mounttype': 'cifs', 'options': 'rw'}
      [AutoMount.py] -getAutoMountPoints:self.automounts --> {'VUWZ': {'username': 'root', 'sharedir': 'Harddisk', 'sharename': 'VUWZ', 'active': 'True', 'ip': '192.168.0.32', 'hdd_replacement': 'False', 'password': 'lopretnI3', 'isMounted': False, 'mounttype': 'cifs', 'options': 'rw'}, 'QNAPVideo': {'username': 'AlecTronic', 'sharedir': 'Video', 'sharename': 'QNAPVideo', 'active': 'True', 'ip': '192.168.0.200', 'hdd_replacement': 'False', 'password': 'lopretnI3', 'isMounted': False, 'mounttype': 'cifs', 'options': 'rw'}}
      [AutoMount.py] CheckMountPoint
      [AutoMount.py] activeMounts:---> 2
      [AutoMount.py] CheckMountPointFinished
      [AutoMount.py] result None
      [AutoMount.py] retval None
      LEN 0
      PATH im CheckMountPointFinished /media/net/VUWZ
      [AutoMount.py] CheckMountPoint
      [AutoMount.py] activeMounts:---> 2
      [AutoMount.py] CheckMountPointFinished
      [AutoMount.py] result None
      [AutoMount.py] retval None
      LEN 0
      PATH im CheckMountPointFinished /media/net/QNAPVideo
      <RemoteControlCode> Write Remote Control Code : 2
      remove DVI-PC because it does not exist.
      hotplug on DVI
      set Videomode DVI 1080p 50Hz
      set aspect, policy, policy2, wss 16:9 panscan letterbox auto
      resolve: resolve ${datadir}/enigma2/
      resolve: -> /usr/share/enigma2/
      [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/EnigmaLight/skins/default/OpenSans.ttf...OK (OpenSans)
      [MultiQuickButton] enabled: True
      [CI_Assignment] activating ci configs:
      [CI_Activate] FOUND 2 CI Slots
      resolve: resolve ${sysconfdir}/enigma2/ci
      resolve: -> /etc/enigma2/ci
      [CI_Activate_Config_CI0] no config file found
      [CI_Activate_Config_CI0] error parsing xml...
      resolve: resolve ${sysconfdir}/enigma2/ci
      resolve: -> /etc/enigma2/ci
      [CI_Activate_Config_CI1] no config file found
      [CI_Activate_Config_CI1] error parsing xml...
      starting hotplug handler
      [browser] browser start
      Looking for embedded skin
      Setvolume: 100 100 (raw)
      Setvolume: 0 0 (-1db)
      Repeated: 1
      Repeated: 3
      Repeated: 7
      Repeated: 15
      Repeated: 31
      Repeated: 63
      Repeated: 127
      ProcessRepeated
      localrepeatedbegindate: Tue Feb 24 06:00:00 2015
      localbegin: Tue Feb 24 06:00:00 2015
      localend: Tue Feb 24 06:00:00 2015
      localnow: Tue Feb 24 18:43:03 2015
      Day: 0
      Day: 1
      Day: 2
      Day: 3
      Day: 4
      Day: 5
      Day: 6
      localbegin after addOneDay: Wed Feb 25 06:00:00 2015
      localend after addOneDay: Wed Feb 25 06:00:00 2015
      ProcessRepeated result
      Wed Feb 25 06:00:00 2015
      Wed Feb 25 06:00:01 2015
      next real activation is Wed Feb 25 06:00:01 2015
      resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebBouquetEditor/web-data
      resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebBouquetEditor/web-data
      EMC: +++ EMC V3.7.4beta20131015 startup
      [MultiQuickButton] enabled: True
      [VPS-Plugin] next execution in 900 sec
      resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/vps/web-data
      resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/vps/web-data
      [AutoShutDown] start....
      Looking for embedded skin
      port changed to DVI
      mode changed to 1080p
      default ('1080p', 'Standard')
      preferedmodes ['720p', '1080i', '576p', '480p', '576i', '480i', ('1080p', 'Standard')]
      [Toplevel.importExternalModules] Imported external module: Example
      [Toplevel.importExternalModules] Imported external module: EPGRefresh
      [HTTPRootResource}.__init__
      [Webinterface] started on 0.0.0.0:81 auth=False ssl=False
      [WebInterface.registerBonjourService] No module named Bonjour.Bonjour
      [HTTPRootResource}.__init__
      [Webinterface] started on 127.0.0.1:80 auth=False ssl=False
      [HTTPRootResource}.__init__
      [Webinterface] started on 0.0.0.0:443 auth=True ssl=True
      [WebInterface.registerBonjourService] No module named Bonjour.Bonjour
      [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
      [EPGC] time updated.. start EPG Mainloop
      before: 1
      after: 1
      not showing fine-tuning wizard, config variable doesn't exist
      showtestcard is false
      [EPGC] create epg.dat backup
      Looking for embedded skin
      setValue 20
      Setvolume: 20 20 (raw)
      Setvolume: 51 51 (-1db)
      getBouquet failed.. no path given!
      service reference for epg query is not valid
      getBouquet failed.. no path given!
      service reference for epg query is not valid
      warning, skin is missing element etitle in <class 'Screens.ChannelSelection.ChannelSelection'>
      RemovePopup, id = ZapError
      playing service..
      [EPGC] 130155 events read from /hdd/epg.dat
      [EPGC] create real epg.dat backup
      not pauseable.
      RemovePopup, id = ZapError
      allocate channel.. 0006:0085
      opening frontend 0
      [eDVBCAService] new channel 0x278ada0!
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11914500 Pol 0 SR 27500000 INV 2 FEC 9 orbpos 192 system 1 modulation 1 pilot 2, rolloff 0
      tuning to 1314 mhz
      OURSTATE: tuning
      allocate Channel: res 0
      [eDVBCIInterfaces] addPMTHandler 1:0:19:81:6:85:C00000:0:0:0:
      allocate demux
      resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      resolve: -> /etc/scan_tp_valid_check.py
      [SEC] set static current limiting
      set sequence pos 3
      set sequence pos 4
      [SEC] setVoltage 2
      [SEC] sleep 200ms
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      Timeout!
      [SEC] invalidate current switch params
      EMC: Setting EPG language: de_DE
      [SEC] sendDiseqc: e00000(DiSEqC reset)
      [SEC] sleep 50ms
      child has terminated
      pipes closed
      0.0.0.0
      169.254
      192.168
      child has terminated
      pipes closed
      nameservers: [[192, 168, 0, 1]]
      read configured interface: {'lo': {'dhcp': False}, 'ra0': {'dhcp': True}, 'eth0': {'dhcp': False}}
      self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'dns-nameservers': False, 'mac': '78:44:76:b0:1d:0d', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 0, 31], 'up': True, 'dns-nameservers': '\tdns-nameservers 192.168.0.1\n', 'mac': '00:1d:ec:05:79:ba', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}}
      AT plugin not found
      resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
      resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
      [OpenWebif] failed to listen on Port 80
      [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
      [SEC] sleep 150ms
      [SEC] sendDiseqc: e01038f3
      [SEC] sleep 50ms
      set sequence pos 3
      [SEC] setTone 1
      [SEC] sleep 10ms
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      (0)fe event: status 1f, inversion off, m_tuning 2
      OURSTATE: ok
      [eDVBCAService] channel 0x278ada0 running
      [eDVBLocalTimerHandler] channel 0x278ada0 running
      no version filtering
      0014: 70 00 00 00 00 00
      mask: fc 00 00 00 00 00
      mode: 00 00 00 00 00 00
      [eEPGCache] channel 0x278ada0 running
      [EPGC] next update in 2 sec
      stop release channel timer
      no version filtering
      0012: 4e 00 81 00 00 00
      mask: ff ff ff 00 00 00
      mode: 00 00 00 00 00 00
      ok ... now we start!!
      no version filtering
      0000: 00 00 00 00 00 00
      mask: ff 00 00 00 00 00
      mode: 00 00 00 00 00 00
      eventNewProgramInfo 0 0
      have 1 video stream(s) (02ff), and 1 audio stream(s) (0302), and the pcr pid is 02ff, and the text pid is 0020
      allocate demux
      disable teletext subtitles
      decoder state: play, vpid=767, apid=770
      DMX_SET_PES_FILTER(0x2ff) - pcr - ok
      DEMUX_START - pcr - ok
      DMX_SET_PES_FILTER(0x302) - audio - ok
      DEMUX_START - audio - ok
      AUDIO_SET_BYPASS(0) - ok
      AUDIO_PAUSE - ok
      AUDIO_PLAY - ok
      Video Device: /dev/dvb/adapter0/video0
      demux device: /dev/dvb/adapter0/demux0
      VIDEO_SET_STREAMTYPE 1 - ok
      DMX_SET_PES_FILTER(0x2ff) - video - ok
      DEMUX_START - video - ok
      VIDEO_FREEZE - ok
      VIDEO_PLAY - ok
      DMX_SET_PES_FILTER(0x20) - ttx - ok
      DEMUX_START - ttx - ok
      VIDEO_SLOWMOTION(0) - ok
      VIDEO_FAST_FORWARD(0) - ok
      VIDEO_CONTINUE - ok
      AUDIO_CONTINUE - ok
      AUDIO_CHANNEL_SELECT(0) - ok
      not pauseable.
      [AutoRes] service changed
      + 1/1 TID 00
      done!
      PATready
      use pmtpid 0062 for service_id 0081
      no version filtering
      0062: 02 00 81 00 00 00
      mask: ff ff ff 00 00 00
      mode: 00 00 00 00 00 00
      doing version filtering
      0000: 00 00 00 05 00 00
      mask: ff 00 00 3f 00 00
      mode: 00 00 00 3e 00 00
      VIDEO_GET_EVENT - ok
      [AutoRes] got event evVideoSizeChanged
      VIDEO_GET_EVENT - ok
      [AutoRes] got event evVideoProgressiveChanged
      [SEC] set dynamic current limiting
      + 1/1 TID 02
      done!
      eventNewProgramInfo 0 0
      have 1 video stream(s) (02ff), and 2 audio stream(s) (0302, 0303), and the pcr pid is 02ff, and the text pid is 0020
      decoder state: play, vpid=767, apid=770
      [eDVBCAService] new service 1:0:19:81:6:85:C00000:0:0:0:
      [eDVBCAService] add demux 0 to slot 0 service 1:0:19:81:6:85:C00000:0:0:0:
      [eDVBCIInterfaces] gotPMT
      demux 0 mask 01 prevhash 00000000
      [eDVBCAService] send 73 bytes
      9f 80 32 45 03 00 81 33 00 2b 01 81 08 00 c0 00 00 00 06 00 85 82 02 01 00 84 02 00 62 09 04 18 33 f8 ba 09 04 09 c4 fb ba 09 04 09 af ff ba 09 04 09 8c fa ba 06 00 20 00 00 1b 02 ff 00 00 06 03 02 00 00 06 03 03 00 00
      doing version filtering
      0062: 02 00 81 33 00 00
      mask: ff ff ff 3f 00 00
      mode: 00 00 00 3e 00 00
      -+ 1/2 TID 4e
      sdt update done!
      [AutoRes] determineContent
      [VLC] Checking for buildin servicets ... no
      [VLC] Checking for existing and usable servicets.so ... No module named servicets
      [VLC] Checking for usable gstreamer service ... yes
      EMC: Next trashcan cleanup in 377 minutes
      ++ 2/2 TID 4e
      done!
      doing version filtering
      0012: 4e 00 81 21 00 00
      mask: ff ff ff 3f 00 00
      mode: 00 00 00 3e 00 00
      [EPGC] start caching events(1424799788)
      Timeout!
      VIDEO_GET_EVENT - ok
      [AutoRes] got event evVideoSizeChanged
      VIDEO_GET_EVENT - ok
      [AutoRes] got event evVideoProgressiveChanged
      [AutoRes] determineContent
      [eDVBLocalTimerHandler] diff is 0
      [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      [eDVBLocalTimerHandler] not changed
      EMC delPathFromCache /hdd/movie/trashcan
      EMC: [EMCMS] trashcan cleanup: nothing to delete...
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      [EPGC] abort non avail schedule other reading
      [EPGC] abort non avail viasat reading
      [EPGC] abort non avail mhw reading
      [EPGC] nownext finished(1424799795)
      action -> SetupActions ok
      [EPGC] schedule finished(1424799798)
      [EPGC] stop caching events(1424799798)
      [EPGC] next update in 60 min
      action -> WizardActions ok
      action -> EL_MainMenuActions left
      action -> EL_MainMenuActions left
      action -> EL_MainMenuActions left
      action -> EL_MainMenuActions ok
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      no ancillary data in audio stream... abort radiotext pes parser
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      cannot blit 32bpp from 2bpp
      action -> SetupActions ok
      Traceback (most recent call last):
      File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
      res = self.actions[action]()
      File "/usr/lib/enigma2/python/Plugins/Extensions/EnigmaLight/EL_ConfigEditor.py", line 398, in keyOk
      self.session.openWithCallback(self.SavePath,EL_Screen_PathSelector,self.devicepath[1].value, "devicepath", "Select devicepath")
      File "/usr/lib/enigma2/python/mytest.py", line 302, in openWithCallback
      dlg = self.open(screen, *arguments, **kwargs)
      File "/usr/lib/enigma2/python/mytest.py", line 312, in open
      dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
      File "/usr/lib/enigma2/python/mytest.py", line 247, in instantiateDialog
      return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
      File "/usr/lib/enigma2/python/mytest.py", line 272, in doInstantiateDialog
      readSkin(dlg, None, dlg.skinName, desktop)
      File "/usr/lib/enigma2/python/skin.py", line 715, in readSkin
      renderer.connect(source) # connect to source
      File "/usr/lib/enigma2/python/Components/Renderer/Label.py", line 14, in connect
      Renderer.connect(self, source)
      File "/usr/lib/enigma2/python/Components/Element.py", line 57, in connect
      upstream.connectDownstream(self)
      AttributeError: 'Label' object has no attribute 'connectDownstream'
      (PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x2a6c6e8>>,('SetupActions', 'ok')) failed)
      ]]>
      </dvbapp2crashlog>
      </crashlogs>
      </stbcrashlog>

      Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von fluXXXion ()

    • Hi alle zusammen,

      war länger nicht mehr hier ;-). Um die ganze Sache etwas zu enttspannen, auch ich habe "Blitze" mit Sedulight, alleridngs auch bei Boblight gehabt. Bei mir nicht so schlimm, so alle 3-4 Stunden einer. Aber man kann es nicht herausfordern. Hab mal die Lötpunkte auf den LED Stripes nachgelötet ( also an den Ecken wo es in die Kabel geht ) und ab dem Zeitpunkt, wurden es noch weniger "Blitze".... Es könnte natürlich am Enigmalight liegen, allerdings ist so etwas immer schwer zu sagen.....

      Hey digi! Du bist ja voll fleißig hier!!! Danke für Deine Hilfe!

      Ich versuche in nächster Zeit wieder häufiger hier zu sein, das ich auch wieder helfen kann!

      Viele Grüße
      MaReichert

    • @digiTaler1: Danke für Deine Tipps!
      In Deinem Link zum ihad hatte der Sedu-User mit den Blitzern den Fehler anscheinend durch Änderung des Intervals auf 0,3 beheben können. Deshalb hoffe ich immer noch, dass eine Kombination der Einstellungen die Hauptursache ist. Aber die Hoffnung schwindet - ich glaube, ich habe so ziemlich alles ausprobiert. ;_(
      Falls Speedy das nicht in den Griff bekommt, muss ich mir adalight arduino mal genauer ansehen. Kostet zwar inkl. Versand mind. 25 €, aber wenn´s dann sauber läuft ...
      Zu meinen LED-Stripes inkl. Netzteil dürfte das ja (hoffentlich) auch passen.
      vuplus-support.org/wbb3/index.php?page=User&userID=178808
      Gruß Christoph :281:

    • digiTaler1 schrieb:

      geh mal ins Plugin und drück die Taste 0 kurz danach grün


      Danke, jetzt läufts's…

      Aber die Farben stimmen überhaubt nicht, egal mit welcher Library:

      Magenta ist gelb, blau ist grün...
      Ist bestimmt Einstellungssache. Ich hab auch schon rumprobiert, leider erfolglos.

      Kommando zurück - es ging kurzzeitig, jetzt geht wieder gar nichts mehr. Wenn ich im Plugin "0" drücke, kommt "Info: [Enigmalight not killed]".

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von fluXXXion ()

    • Danke, das war's :thumbsup:

      Jetzt geht's ans Finetuning, orange ist eher knallrot etc.

      Übrigens wird mir im Plugin unter Output immer noch /dev/ttyUSB0 angezeigt...

    • wenn du soweit bist dann schick mal ein paar bilder mit vorher nachher

      bin mal gespannt ob/was man noch rausholen kann

    • digiTaler1 schrieb:


      Der Configeditor ist nur zum einmaligen Erzeugen einer Config wichtig, danach kann da Pusteblume stehen - hat mit dem Laufenden Betrieb dann nichts mehr zu tun.

      Beim Start (grün) wird immer die abgelegte enigmalight.conf gelesen!


      Sorry, das hatte ich überlesen. Wobei ich mich frage, warum dieser Eintrag in der GUI dann eigentlich existiert. Ist da überhaupt etwas auswählbar oder eintragbar?

    • Okay, also genau so wie im Ambilight Plugin.

      Mit den Farben komme ich nicht weiter, besonders krass ist es bei grün und grau.





      Meine Konfiguration: Oben und unten je 4 LED-Streifen, die Leisten links und rechts kommen vom im TV eingebauten Ambilight. Insbesondere bei grünem Rasen (Fußball) ist die Farbwiedergabe vom TV um einiges naturgetreuer als das eher giftgrüne vom Karatelight/Enigmalight.

    • Damit habe ich bereits herumexperimentiert, komme aber auf keinen grünen Zweig, da sich die Farbe nicht "in Echtzeit" ändert, es reicht auch nicht, das Plugin mit "0" zu killen, erst nach einem Neustart (GUI-Neustart reicht nicht) lässt sich das Ergebnis begutachten.

      Ziemlich unpraktisch finde ich, dass man die Farbewerte nur in 1er-Schritten ändern kann.
      Zudem werden in allen Profilen ("Custom Profile 1" etc.) dieselben Einstellungen angezeigt.
      Und wo werden diese Einstellungen gespeichert? In der enigmalight.conf jedenfalls nicht...

      Edit: Ich habe jetzt mal den Grün-Wert von 255 auf 0 gestellt, Rot und Blau stehen auf 255, das ändert aber rein gar nichts an den Lampenfarben. Ich spare mir Screenshots dazu...

      Edit II: Auch das Ändern von "Green Adjust" von 0.96 auf 0 bringt überhaupt nichts.

      Gibt es irgendwo eine brauchbare Anleitung, an welchen Schrauben man drehen muss, damit sich die Farben ändern?

      Dieser Beitrag wurde bereits 5 mal editiert, zuletzt von fluXXXion ()