Gerätemanager funktioniert nicht

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Gerätemanager funktioniert nicht

      Hallo.

      hab heute mal, um VMC nutzen zu können, eine alte IDE Platte mit SATA Adapter eingebaut. Platte und Adapter bekommen Strom. Platte fährt auch hoch. Zumindest höre was. :) Gehe ich nun ins VTI Panel um die Platte einzubinden ist erst mal nichts erkannt. Drücke ich dann "Initialisieren" kommt eine Fehlermeldung. Siehe Bild im Anhang. Das gleiche passiert auch ohne Platte. Jemand eine Idee? Muss ich noch was anderes vorher machen oder installieren?

      Danke schon mal.

      Uli

      Edit/Ergänzung:
      Hab ich meine Frage im falschen Forum gestellt oder mich, wegen fehlenden Know How, so missverständlich ausgedrückt? Kann denn keiner was dazu sagen? Fehlen noch weitere Infos?

      Edit by NaseDC: Die beiden Posts zusammengeführt. Wenn ohne Antwort der Beitrag ergänzt wird oder neues miteteilt werden soll, bitte den Bearbeiten-Button nutzen.
      Dateien

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Limba001 ()

    • Nee passt schon.
      Was möchtest du denn initialisieren wenn nichts erkannt wurde?

      Den passenden crashlog aus /media/hdd/ anhängen wäre auch günstiger als ein Bild vom Crash wo man nur einen kleinen Teil sieht.
      _______________________________________________________
      LG Nase
      Receiver
      Duo 4Kse DVB-S2x (45308X FBC) / DVB-T2 (BCM3466) ; Samsung HM321H intern ; Synology 218+ ; Inverto Unicable II IDLU-UWT110-CUO1O-32P Multischalter 5/32
      Uno 4K SE DVB-S2 (45208 FBC) ; TOSHIBA MQ01ABD0 extern ; Synology 218+ ; Inverto Unicable II IDLU-UWT110-CUO1O-32P Multischalter 5/32
      Uno 4K DVB-S2 (45208 FBC) ; Synology 218 ; Inverto Unicable II IDLU-UWT110-CUO1O-32P Multischalter 5/32 ; Inverto Pro Wideband IDLP-WDB01-OOPRO-OPP
      Zero 4K DVB-S2x (SI2166) / HMP-Combo DVB C/T2 Hybrid ; Synology 218+ ; Selfsat H30D2 / Maximum UHF 200


      Der Fortschritt lebt vom Austausch des Wissens. (Albert Einstein)
      Wende dein Gesicht der Sonne zu, dann fallen die Schatten hinter dich. (aus Uganda)

    • Zitat Wiki
      Crashlog
      Ein Crashlog ist eine Datei, die bei einem Purplescreen oder Greenscreen unter /media/hdd angelegt wird, darin wird dann, neben allgemeinen Systeminformationen, auch der Fehler vermerkt.
      Bei Problemen bitte immer den Crashlog als Datei in einem Thread mit anhängen!

      Wo soll der Crashlog denn sonst liegen wenn man keine HDD hätte?
      _______________________________________________________
      LG Nase
      Receiver
      Duo 4Kse DVB-S2x (45308X FBC) / DVB-T2 (BCM3466) ; Samsung HM321H intern ; Synology 218+ ; Inverto Unicable II IDLU-UWT110-CUO1O-32P Multischalter 5/32
      Uno 4K SE DVB-S2 (45208 FBC) ; TOSHIBA MQ01ABD0 extern ; Synology 218+ ; Inverto Unicable II IDLU-UWT110-CUO1O-32P Multischalter 5/32
      Uno 4K DVB-S2 (45208 FBC) ; Synology 218 ; Inverto Unicable II IDLU-UWT110-CUO1O-32P Multischalter 5/32 ; Inverto Pro Wideband IDLP-WDB01-OOPRO-OPP
      Zero 4K DVB-S2x (SI2166) / HMP-Combo DVB C/T2 Hybrid ; Synology 218+ ; Selfsat H30D2 / Maximum UHF 200


      Der Fortschritt lebt vom Austausch des Wissens. (Albert Einstein)
      Wende dein Gesicht der Sonne zu, dann fallen die Schatten hinter dich. (aus Uganda)

    • Also kommt die Fehlermeldung weil nichts erkannt wurde? Sollte das so sein ist die Frage warum nichts erkannt wird.

    • Ich tippe mal auf dn IDE/S-ATA-Adapter, die haben mir früher schön öfter mal Stre auch unter Windows/Linux auf dem PC gemacht
      ACHTUNG!!!! Hier folgt eine Signatur:


      Die Benutzung der Suche ist NICHT verboten! D:

      "Hilfe!!!" ist kein sinnvoller Titel für einen neuen Thread, ebensowenig "VU+Zero" oder vergleichbares.

      Keine Hilfe ohne ausgefülltes Profil!
      Kein Netzwerksupport bei manueller IP-Adress-Vergabe :-)
      Kein Support bei portforwardings/ Portfreigaben

      Profil extra angepasst für die arme Emma, die sonst nichts im Leben hat :happy1:

    • unter media/hdd ist dieses:
      Spoiler anzeigen


      <?xml version="1.0" encoding="utf-8"?>
      <stbcrashlog>
      <dvbapp2>
      <crashdate>Thu Jan 1 01:01:07 1970</crashdate>
      <compiledate>Dec 2 2015</compiledate>
      <skin>AtileHD/skin.xml</skin>
      <sourcedate>2015-12-02</sourcedate>
      <branch>vti-master</branch>
      </dvbapp2>
      <image>
      <stbmodel>duo2</stbmodel>
      <kernelcmdline>libata.force=1:1.5Gbps bmem=192M@64M bmem=384M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
      <nimsockets>NIM Socket 0:</nimsockets>
      <vtiversion>9.0.1</vtiversion>
      <imageversion>
      <![CDATA[
      version=0901201511171501
      creator=VTi <info@vuplus-support.org>
      url=http://www.vuplus-support.org/
      ]]>
      </imageversion>
      </image>
      <software>
      <dvbapp2software>
      <![CDATA[
      enigma2 - vti-9.0.1-20151202-r0
      enigma2-data-enigma2 - vti-9.0.1-20151117-r0
      enigma2-data-fonts - vti-9.0.1-20151117-r0
      enigma2-data-keymaps - vti-9.0.1-20151117-r0
      enigma2-data-meta - vti-9.0.1-20151117-r0
      enigma2-data-spinner - vti-9.0.1-20151117-r0
      enigma2-data-xml - vti-9.0.1-20151201-r0
      enigma2-defaultservices - 1.0-r8-vti03
      enigma2-locale-ar - vti-9.0.1-20151117-r0
      enigma2-locale-ca - vti-9.0.1-20151117-r0
      enigma2-locale-cs - vti-9.0.1-20151128-r0
      enigma2-locale-da - vti-9.0.1-20151117-r0
      enigma2-locale-de - vti-9.0.1-20151201-r0
      enigma2-locale-el - vti-9.0.1-20151117-r0
      enigma2-locale-en - vti-9.0.1-20151117-r0
      enigma2-locale-es - vti-9.0.1-20151117-r0
      enigma2-locale-et - vti-9.0.1-20151117-r0
      enigma2-locale-fi - vti-9.0.1-20151117-r0
      enigma2-locale-fr - vti-9.0.1-20151128-r0
      enigma2-locale-fy - vti-9.0.1-20151117-r0
      enigma2-locale-hr - vti-9.0.1-20151117-r0
      enigma2-locale-hu - vti-9.0.1-20151117-r0
      enigma2-locale-is - vti-9.0.1-20151117-r0
      enigma2-locale-it - vti-9.0.1-20151117-r0
      enigma2-locale-lt - vti-9.0.1-20151117-r0
      enigma2-locale-lv - vti-9.0.1-20151117-r0
      enigma2-locale-nl - vti-9.0.1-20151117-r0
      enigma2-locale-no - vti-9.0.1-20151117-r0
      enigma2-locale-pl - vti-9.0.1-20151117-r0
      enigma2-locale-pt - vti-9.0.1-20151117-r0
      enigma2-locale-ru - vti-9.0.1-20151117-r0
      enigma2-locale-sk - vti-9.0.1-20151117-r0
      enigma2-locale-sl - vti-9.0.1-20151117-r0
      enigma2-locale-sr - vti-9.0.1-20151117-r0
      enigma2-locale-sv - vti-9.0.1-20151117-r0
      enigma2-locale-tr - vti-9.0.1-20151117-r0
      enigma2-locale-uk - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-atilehd - 3.1-r0
      enigma2-plugin-extensions-cooltvguide - Coolman_V7.3.0
      enigma2-plugin-extensions-dvdplayer - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-elektro - vti-9.0.0-20151024-r0
      enigma2-plugin-extensions-epgrefresh - vti-9.0.0-20151024-r0
      enigma2-plugin-extensions-epgsearch - vti-9.0.1-20151110-r0
      enigma2-plugin-extensions-hbbtv - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-lcd4linux - 4.6-r4.vtir3
      enigma2-plugin-extensions-mediaplayer - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-mediaportal - 7.3.1
      enigma2-plugin-extensions-mediascanner - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-openwebif - 0.4.7-e2openpluginsgit20151125-r0-1335+ccbc523
      enigma2-plugin-extensions-piconmanager - 2.2-20150329-r2
      enigma2-plugin-extensions-pictureplayer - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-remotechannelstreamconverter - 1.0-e2openpluginsgit20151009-r0
      enigma2-plugin-extensions-satipclient - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-streamtv - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-xbmc - 1.0-20150506.0_beta_r0
      enigma2-plugin-picons-vti.default - 1.2-20151023-r0
      enigma2-plugin-skin-750s - vti-9.0.1-20151012-r0
      enigma2-plugin-skin-atile - 3.9-r0
      enigma2-plugin-skin-mutespectator - 2.4-r0
      enigma2-plugin-skin-stylefhd - 2015-11-24-r0
      enigma2-plugin-systemplugins-animationsetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-autoframerate - 0.2-r1
      enigma2-plugin-systemplugins-autoresolution - vti-9.0.1-20151110-r0
      enigma2-plugin-systemplugins-autoshutdown - 0.6-r10
      enigma2-plugin-systemplugins-blindscan - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-commoninterfaceassignment - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-devicemanager2 - 1.6-r0
      enigma2-plugin-systemplugins-firmwareupgrade - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-hdmicec - 1.2-r9
      enigma2-plugin-systemplugins-hotplug - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-manualfancontrol - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-mphelp - vti-9.0.0-20151024-r0
      enigma2-plugin-systemplugins-networkbrowser - vti-9.0.1-20151110-r0
      enigma2-plugin-systemplugins-networkwizard - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-remotecontrolcode - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-skinselector - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-toolkit - vti-9.0.1-20151110-r0
      enigma2-plugin-systemplugins-transcodingsetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-ui3dsetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-uipositionsetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-vfdskinselector - 1.8-r0
      enigma2-plugin-systemplugins-videoenhancement - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-videomode - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-videotune - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-wirelesslan - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-wirelesslansetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-zappingmodeselection - vti-9.0.1-20151117-r0
      enigma2-plugins-meta - vti-9.0.1-20151110-r0
      enigma2-python - vti-9.0.1-20151202-r0
      enigma2-skins-meta - vti-9.0.1-20151012-r0
      enigma2-streamproxy - 1.0+git15+37a3f19-r5
      enigma2-transtreamproxy - 2.0-r9-vti00+git36+074ccf7-r9-vti00
      packagegroup-vuplus-enigma2 - 1.0-r8-vti06
      ]]>
      </dvbapp2software>
      <gstreamersoftware>
      <![CDATA[
      gstreamer1.0 - 1.4.5-r0
      gstreamer1.0-libav - 1.4.5-r0
      gstreamer1.0-plugin-dvbmediasink - 1.0+git63+e839734-r4-vti003
      gstreamer1.0-plugin-subsink - 1.0+git6+0437b39-r0
      gstreamer1.0-plugins-bad - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-faad - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-fragmented - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-mms - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-mpegpsdemux - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-mpegtsdemux - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-rtmp - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-videoparsersbad - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-alsa - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-app - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-audioconvert - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-audioresample - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-ogg - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-playback - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-subparse - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-typefindfunctions - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-vorbis - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-apetag - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-audioparsers - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-autodetect - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-avi - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-flac - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-flv - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-icydemux - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-id3demux - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-isomp4 - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-matroska - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-rtp - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-rtpmanager - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-rtsp - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-souphttpsrc - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-udp - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-wavparse - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-amrnb - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-amrwbdec - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-asf - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-cdio - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-dvdsub - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-mad - 1.4.5-r0-vti00
      libgstapp-1.0-0 - 1.4.5-r0-vti00
      libgstaudio-1.0-0 - 1.4.5-r0-vti00
      libgstcodecparsers-1.0-0 - 1.4.5-r0-vti00
      libgstmpegts-1.0-0 - 1.4.5-r0-vti00
      libgstpbutils-1.0-0 - 1.4.5-r0-vti00
      libgstriff-1.0-0 - 1.4.5-r0-vti00
      libgstrtp-1.0-0 - 1.4.5-r0-vti00
      libgstrtsp-1.0-0 - 1.4.5-r0-vti00
      libgstsdp-1.0-0 - 1.4.5-r0-vti00
      libgsttag-1.0-0 - 1.4.5-r0-vti00
      libgsturidownloader-1.0-0 - 1.4.5-r0-vti00
      libgstvideo-1.0-0 - 1.4.5-r0-vti00
      ]]>
      </gstreamersoftware>
      </software>
      <crashlogs>
      <dvbapp2crashlog>
      <![CDATA[
      2/defaults/
      [dvbapp2] set os enivronment variable SSL_CERT_FILE= /etc/ssl/certs/ca-certificates.crt
      enumerating block devices...
      found block device 'loop0': blacklisted
      found block device 'loop1': blacklisted
      found block device 'loop2': blacklisted
      found block device 'loop3': blacklisted
      found block device 'loop4': blacklisted
      found block device 'loop5': blacklisted
      found block device 'loop6': blacklisted
      found block device 'loop7': blacklisted
      found block device 'mtdblock0': blacklisted
      found block device 'mtdblock1': blacklisted
      found block device 'mtdblock2': blacklisted
      found block device 'mtdblock3': blacklisted
      found block device 'mtdblock4': blacklisted
      not loading user skin: [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
      [VTi] loading vfd skin: vfd_skin/skin_vfd_vti_I.xml
      [VTi] loading user defined colors for skin AtileHD/skin_user_colors.xml
      [VTi] loading user defined header file for skin AtileHD/skin_user_header.xml
      [VTi] loading modular skin file : AtileHD/mySkin/skin_Xtended_Plugin_Screens.xml
      menu_mainmenu
      Reading satellites.xml
      resolve: resolve ${datadir}/enigma2/unicable.xml
      resolve: -> /usr/share/enigma2/unicable.xml
      main thread is non-idle! display spinner!
      [InitNimManager] check multi type slot 0
      [Nimmanager] slot 0 create config satellite..
      sec config cleared
      setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(AVL6211), need rotorworkaround No, enabled Yes, DVB-S2 Yes, DVB-T2 No
      slot: 0 configmode: simple
      diseqcmode: diseqc_a_b
      sec config completed
      resolve: resolve ${datadir}/enigma2/setup.xml
      resolve: -> /usr/share/enigma2/setup.xml
      Preferred tag editor set to None
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/bouquets.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.favourites.tv
      74 entries in Bouquet userbouquet.favourites.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.dbe00.tv
      74 entries in Bouquet userbouquet.dbe00.tv
      2 entries in Bouquet bouquets.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/bouquets.radio
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.favourites.radio
      0 entries in Bouquet userbouquet.favourites.radio
      1 entries in Bouquet bouquets.radio
      [eDVBLocalTimeHandler] enable sync local time with transponder time!
      add dreampackage scanner plugin
      added
      [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
      [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
      [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
      [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
      [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
      [FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (Regular)
      [FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (RegularLight)
      [FONT] adding font /usr/share/enigma2/AtileHD/fonts/meteocons.ttf...OK (Meteo)
      [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
      [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
      [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
      [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
      [FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (Regular)
      [FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (RegularLight)
      [FONT] adding font /usr/share/enigma2/AtileHD/fonts/meteocons.ttf...OK (Meteo)
      [FONT] adding font /usr/share/fonts/analog.ttf...OK (VFD)
      [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (VFD_II)
      [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
      [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
      cannot open /proc/stb/avs/0/input_choices
      --> setting scaler_sharpness to: 00000000
      couldn't open /proc/stb/misc/12V_output
      resolve: resolve ${datadir}/enigma2/keymap.xml
      resolve: -> /usr/share/enigma2/keymap.xml
      main thread is non-idle! display spinner!
      setLCDBrightness 25
      setLCDBrightness 127
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      Activating keymap: Keyboard English
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      Activating language German
      language set to de_DE
      FIXME: request for unknown slot
      FIXME: request for unknown slot
      [XBMC] Desktop size [1280x720]
      [PiconManager] set language to de
      [PiconManager] set language to de
      main thread is non-idle! display spinner!
      remove DVI-PC because it does not exist.
      set HDMI Colorspace : Edid(Auto)
      hotplug on DVI
      set Videomode DVI 720p multi
      set aspect, policy, policy2, wss 16:9 panscan letterbox auto
      Imports: isDream: True
      ('[MediaPortal] fallback to default translation for', 'Wall')
      ('[MediaPortal] fallback to default translation for', 'PVR/VIDEO')
      ('[MediaPortal] fallback to default translation for', 'PVR/VIDEO')
      ('[MediaPortal] fallback to default translation for', 'PVR/VIDEO')
      ('[MediaPortal] fallback to default translation for', 'EPG/INFO')
      ('[MediaPortal] fallback to default translation for', 'GENRES')
      resolve: resolve ${datadir}/enigma2/setup.xml
      resolve: -> /usr/share/enigma2/setup.xml
      resolve: resolve ${libdir}
      resolve: -> /usr/lib
      resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/TransCodingSetup/plugin.pyo
      resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/TransCodingSetup/plugin.pyo
      resolve: resolve ${datadir}/enigma2/
      resolve: -> /usr/share/enigma2/
      [LCD4linux] libusb found :) 2015-12-02-vti-master
      <ZappingModeSelection> set zapping mode : mute
      resolve: resolve ${datadir}/enigma2/
      resolve: -> /usr/share/enigma2/
      resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
      resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
      --> setting contrast to: 00008000
      --> setting saturation to: 00008000
      --> setting hue to: 00008000
      --> setting brightness to: 00008000
      --> setting block_noise_reduction to: 00000000
      --> setting mosquito_noise_reduction to: 00000000
      --> setting digital_contour_removal to: 00000000
      --> setting splitmode to: off
      --> setting sharpness to: 00000000
      --> setting auto_flesh to: 00000000
      --> setting green_boost to: 00000000
      --> setting blue_boost to: 00000000
      --> setting dynamic_contrast to: 00000000
      --> setting scaler_vertical_dejagging to: disable
      --> setting smooth to: disable
      --> applying pep values
      [UIPositionSetup] write dst_left : 0
      [UIPositionSetup] write dst_width : 720
      [UIPositionSetup] write dst_top : 0
      [UIPositionSetup] write dst_height : 576
      [DeviceManager2] Loading skin /usr/lib/enigma2/python/Plugins/SystemPlugins/DeviceManager2/skin.xml
      <RemoteControlCode> Write Remote Control Code : 2
      [MP EPGImport] autostart (0) occured at 43.164048
      [MP EPGImport] WakeUpTime now set to 22167 (now=43)
      [MP EPGImport] onBootStartCheck
      [MP EPGImport] WakeUpTime now set to 22167 (now=43)
      [MP EPGImport] now=43 wake=22167 wake-now=22124
      [MP EPGImport] starting import because auto-run on boot is enabled
      [CI_Assignment] activating ci configs:
      resolve: resolve ${sysconfdir}/enigma2/ci
      resolve: -> /etc/enigma2/ci
      resolve: resolve ${sysconfdir}/enigma2/ci
      resolve: -> /etc/enigma2/ci
      [CI_Activate] activate CI0 with following settings:
      ([], [], [])
      starting hotplug handler
      [browser] browser start
      Looking for embedded skin
      [MP EPGImport] autostart (0) occured at 43.369101
      [MP EPGImport] onBootStartCheck
      [MP EPGImport] WakeUpTime now set to 22167 (now=43)
      [MP EPGImport] now=43 wake=22167 wake-now=22124
      [MP EPGImport] starting import because auto-run on boot is enabled
      [Elektro] Starting up Version 3.4.5a
      [Elektro] Set up standby timer
      [Elektro] Set up sleep timer
      Looking for embedded skin
      [AutoShutDown] start....
      Looking for embedded skin
      port changed to DVI
      mode changed to 720p
      default ('720p', 'Standard')
      preferedmodes ['1080i', '1080p', '576p', '480p', '576i', '480i', ('720p', 'Standard')]
      [EPGC] set Vu+ in EPG-server (default) mode
      [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
      not showing fine-tuning wizard, config variable doesn't exist
      showtestcard is false
      Looking for embedded skin
      setValue 100
      Setvolume: 100 100 (raw)
      Setvolume: 0 0 (-1db)
      Setvolume: 100 100 (raw)
      Setvolume: 0 0 (-1db)
      [MP EPG] Can't download iptv.ink epg data:
      [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.DNSLookupError'>: DNS lookup failed: address 'epg.iptv.ink' not found.
      ]
      service reference for epg query is not valid
      service reference for epg query is not valid
      warning, skin is missing element etitle in <class 'Screens.ChannelSelection.ChannelSelection'>
      RemovePopup, id = ZapError
      playing service..
      not pauseable.
      RemovePopup, id = ZapError
      allocate channel.. 03f3:0001
      opening frontend 0
      [eDVBCAService] new channel 0x156e788!
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11361750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1611 mhz
      OURSTATE: tuning
      allocate Channel: res 0
      FIXME: request for unknown slot
      allocate demux
      resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      resolve: -> /etc/scan_tp_valid_check.py
      [SEC] set static current limiting
      set sequence pos 3
      set sequence pos 4
      [SEC] setVoltage 2
      [SEC] sleep 200ms
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      nameservers: []
      read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
      self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'dns-nameservers': False, 'mac': '00:00:00:00:00:00', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'dns-nameservers': False, 'mac': '00:1d:ec:0a:04:8a', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
      AT plugin not found
      SerienRecorder plugin not found
      resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
      resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
      resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface
      resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
      resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
      resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
      [OpenWebif] started on 80
      [SEC] invalidate current switch params
      [SEC] sendDiseqc: e00000(DiSEqC reset)
      [SEC] sleep 50ms
      [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
      [SEC] sleep 150ms
      [SEC] sendDiseqc: e01038f2
      [SEC] sleep 50ms
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      action -> InfobarMenuActions mainMenu
      loading mainmenu XML...
      [Animation] set animation mode 1
      Subtitles Subtitles
      TimerEdit TimerEditList
      PluginBrowser PluginBrowser
      [SEC] set dynamic current limiting
      action -> WizardActions down
      action -> WizardActions down
      action -> WizardActions down
      [Elektro] Showing Standby Sceen
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      action -> DirectionActions down
      action -> DirectionActions downUp
      unknown action DirectionActions/downUp! typo in keymap?
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11361750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1611 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      set sequence pos 3
      set sequence pos 7
      [SEC] invalidate current switch params
      [SEC] sendDiseqc: e00000(DiSEqC reset)
      [SEC] sleep 50ms
      [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
      [SEC] sleep 150ms
      action -> MsgBoxActions ok
      [SEC] sendDiseqc: e01038f2
      [SEC] sleep 50ms
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      action -> WizardActions down
      action -> WizardActions ok
      unknown action WizardActions/ok! typo in keymap?
      action -> OkCancelActions ok
      About About
      action -> WizardActions down
      action -> WizardActions down
      action -> WizardActions down
      action -> WizardActions down
      action -> WizardActions down
      action -> WizardActions down
      action -> WizardActions down
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11361750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1611 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      set sequence pos 3
      set sequence pos 7
      [SEC] invalidate current switch params
      [SEC] sendDiseqc: e00000(DiSEqC reset)
      [SEC] sleep 50ms
      [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
      [SEC] sleep 150ms
      action -> WizardActions down
      [SEC] sendDiseqc: e01038f2
      [SEC] sleep 50ms
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      action -> WizardActions down
      action -> WizardActions down
      [SEC] set dynamic current limiting
      action -> WizardActions down
      action -> WizardActions ok
      unknown action WizardActions/ok! typo in keymap?
      action -> OkCancelActions ok
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11361750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1611 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      set sequence pos 3
      set sequence pos 7
      [SEC] invalidate current switch params
      [SEC] sendDiseqc: e00000(DiSEqC reset)
      [SEC] sleep 50ms
      [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
      [SEC] sleep 150ms
      [SEC] sendDiseqc: e01038f2
      [SEC] sleep 50ms
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      action -> ColorActions blue
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      action -> ColorActions blue
      unknown action ColorActions/blue! typo in keymap?
      action -> OkCancelActions ok
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11361750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1611 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      set sequence pos 3
      set sequence pos 7
      [SEC] invalidate current switch params
      [SEC] sendDiseqc: e00000(DiSEqC reset)
      [SEC] sleep 50ms
      [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
      [SEC] sleep 150ms
      [SEC] sendDiseqc: e01038f2
      [SEC] sleep 50ms
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      action -> ColorActions yellow
      Traceback (most recent call last):
      File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
      res = self.actions[action]()
      File "/usr/lib/enigma2/python/Plugins/SystemPlugins/DeviceManager2/plugin.py", line 397, in keyYellow
      TypeError: 'NoneType' object has no attribute '__getitem__'
      (PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x58a9c8a0>>,('ColorActions', 'yellow')) failed)
      ]]>
      </dvbapp2crashlog>
      </crashlogs>
      </stbcrashlog>


      Edit hgdo: Geht's noch, den ganzen Log als Beitrag zu posten? Bitte entweder im Spoiler oder als Dateianhang! Ich hab das geändert.

    • Welches Problem willst du denn jetzt eigentlich lösen? Hab' jetzt ein wenig den Faden verloren ...

      Du drückst im Gerätemanager die gelbe Taste zum "Initialisieren", obwohl keine Platte da ist?

      Dass der Gerätemanager crasht, wenn kein Medium vorhanden ist oder gefunden wird, ist zwar ganz klar ein Bug - aber auch nicht soooo erstaunlich ...
      Eventuelle Ratschläge gebe ich nach bestem Wissen und Gewissen aber ohne jede Gewähr. Bei Fragen fragen.
      Tipps:       Screenshots erstellen VU+ Wiki

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von Dibagger ()

    • Limba001 schrieb:

      An dem Adapter kann es nicht liegen. Es crashed auch ohne Platte.

      Du hast doch geschrieben, es wird keine Platte erkannt, also hast du auch mit Adapter keine Platte?
      Schliess mal ne S-ATA-HDD an und schau, ob sie erkannt wird.
      ACHTUNG!!!! Hier folgt eine Signatur:


      Die Benutzung der Suche ist NICHT verboten! D:

      "Hilfe!!!" ist kein sinnvoller Titel für einen neuen Thread, ebensowenig "VU+Zero" oder vergleichbares.

      Keine Hilfe ohne ausgefülltes Profil!
      Kein Netzwerksupport bei manueller IP-Adress-Vergabe :-)
      Kein Support bei portforwardings/ Portfreigaben

      Profil extra angepasst für die arme Emma, die sonst nichts im Leben hat :happy1:

    • So Problem nun endlich gelöst. VU+ repariert und vernünftige Platte eingebaut. Jetzt geht alles.

      Danke an alle die mir helfen wollten.

      Gibt es irgendwo eine Anleitung was ich alles machen muss um Amazon Prime Video zu nutzen?