Nach längerer Zeit kommt der Spinner und die Box ist dann voll ausgelastet (9.02)

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Hier mal mein Log warum meine Box immer hängen bleibt:
      Spoiler anzeigen
      15:38:51.625 [e2-core] [VTi] version: 9.0.2 --> build: 2016-02-16 (3f3662f) | vti-master
      15:38:52.740 [e2-python] action -> WizardActions back
      15:38:52.741 [e2-python] unknown action WizardActions/back! typo in keymap?
      15:38:52.742 [e2-python] action -> OkCancelActions cancel
      15:38:53.052 [e2-python] action -> WizardActions back
      15:38:53.053 [e2-python] unknown action WizardActions/back! typo in keymap?
      15:38:53.053 [e2-python] action -> OkCancelActions cancel
      15:38:57.038 [e2-python] action -> GlobalActions power_down
      15:38:57.278 [e2-python] enter standby
      15:39:00.305 [e2-python] stopService
      15:39:00.306 [e2-core] [eDVBCAService] free slot 0 demux 0 for service 1:0:19:81:6:85:C00000:0:0:0:
      15:39:00.307 [e2-core] [eDVBCAService] free service 1:0:19:81:6:85:C00000:0:0:0:
      15:39:00.318 [e2-core] decoder state: play, vpid=-1, apid=-1
      15:39:00.319 [e2-core] DEMUX_STOP - pcr - ok
      15:39:00.320 [e2-core] DEMUX_STOP - video - ok
      15:39:00.320 [e2-core] VIDEO_STOP - ok
      15:39:00.326 [e2-core] AUDIO_STOP - ok
      15:39:00.326 [e2-core] DEMUX_STOP - audio - ok
      15:39:00.326 [e2-core] AUDIO_CONTINUE - ok
      15:39:00.327 [e2-core] DEMUX_STOP - ttx - ok
      15:39:00.332 [e2-core] start release channel timer
      15:39:00.414 [e2-core] setLCDBrightness 0
      15:39:01.060 [e2-core] main thread is non-idle! display spinner!
      15:39:01.517 [e2-python] [AutoShutDown] go to standby . . .
      15:39:01.517 [e2-python] [AutoShutDown] No inactivity timer to stop
      15:39:03.332 [e2-core] release cached channel (timer timeout)
      15:39:03.333 [e2-core] [eDVBCAService] remove channel 0x24da818
      15:39:03.333 [e2-core] [eDVBLocalTimerHandler] remove channel 0x24da818
      15:39:03.334 [e2-core] [eEPGCache] remove channel 0x24da818
      15:39:03.334 [e2-core] stop release channel timer
      15:39:06.336 [e2-core] close frontend 0
      15:42:44.449 [e2-python] AtileHD lookup for ID 656853
      15:49:03.249 [e2-core] child has terminated
      15:49:03.250 [e2-core] pipes closed
      15:52:44.449 [e2-python] AtileHD lookup for ID 656853
      15:58:33.249 [e2-core] child has terminated
      15:58:33.249 [e2-core] pipes closed
      16:02:44.449 [e2-python] AtileHD lookup for ID 656853
      16:09:03.248 [e2-core] child has terminated
      16:09:03.249 [e2-core] pipes closed
      16:09:03.334 [e2-core] [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
      16:09:03.394 [e2-core] [eDVBLocalTimerHandler] RTC time is 16:09:00
      16:09:03.394 [e2-core] [eDVBLocalTimerHandler] Receiver time is 16:09:03
      16:09:03.394 [e2-core] [eDVBLocalTimerHandler] RTC to Receiver time difference is 3 seconds
      16:09:03.394 [e2-core] [eDVBLocalTimerHandler] set Linux Time to RTC Time
      16:12:44.445 [e2-python] AtileHD lookup for ID 656853
      16:19:03.302 [e2-core] child has terminated
      16:19:03.302 [e2-core] pipes closed
      16:22:44.446 [e2-python] AtileHD lookup for ID 656853
      16:29:03.541 [e2-core] child has terminated
      16:29:03.541 [e2-core] pipes closed
      16:30:02.797 [e2-core] child has terminated
      16:30:02.797 [e2-core] pipes closed
      16:30:02.800 [e2-core] child has terminated
      16:30:02.800 [e2-core] pipes closed
      16:30:12.766 [e2-core] child has terminated
      16:30:12.766 [e2-core] pipes closed
      16:32:44.445 [e2-python] AtileHD lookup for ID 656853
      16:39:03.244 [e2-core] child has terminated
      16:39:03.245 [e2-core] pipes closed
      16:39:03.390 [e2-core] [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
      16:39:03.450 [e2-core] [eDVBLocalTimerHandler] RTC time is 16:39:00
      16:39:03.450 [e2-core] [eDVBLocalTimerHandler] Receiver time is 16:39:03
      16:39:03.450 [e2-core] [eDVBLocalTimerHandler] RTC to Receiver time difference is 3 seconds
      16:39:03.451 [e2-core] [eDVBLocalTimerHandler] set Linux Time to RTC Time
      16:42:44.435 [e2-python] AtileHD lookup for ID 656853
      16:49:03.234 [e2-core] child has terminated
      16:49:03.234 [e2-core] pipes closed
      16:52:44.435 [e2-python] AtileHD lookup for ID 656853
      16:59:03.233 [e2-core] child has terminated
      16:59:03.233 [e2-core] pipes closed
      17:02:44.435 [e2-python] AtileHD lookup for ID 656853
      17:09:03.233 [e2-core] child has terminated
      17:09:03.233 [e2-core] pipes closed
      17:09:03.441 [e2-core] [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
      17:09:03.500 [e2-core] [eDVBLocalTimerHandler] RTC time is 17:09:00
      17:09:03.500 [e2-core] [eDVBLocalTimerHandler] Receiver time is 17:09:03
      17:09:03.501 [e2-core] [eDVBLocalTimerHandler] RTC to Receiver time difference is 3 seconds
      17:09:03.501 [e2-core] [eDVBLocalTimerHandler] set Linux Time to RTC Time
      17:12:44.426 [e2-python] AtileHD lookup for ID 656853
      17:18:33.224 [e2-core] child has terminated
      17:18:33.224 [e2-core] pipes closed
      17:22:44.426 [e2-python] AtileHD lookup for ID 656853
      17:22:54.257 [e2-python] action -> StandbyActions power
      17:22:54.257 [e2-python] leave standby
      17:22:54.640 [e2-python] RemovePopup, id = goStandby
      17:22:54.647 [e2-python] playing service..
      17:22:54.661 [e2-python] not pauseable.
      17:22:54.662 [e2-python] RemovePopup, id = ZapError
      17:22:54.663 [e2-core] allocate channel.. 0006:0085
      17:22:54.663 [e2-core] opening frontend 0
      17:22:54.697 [e2-core] [eDVBCAService] new channel 0x24da818!
      17:22:54.697 [e2-core] (0)tune
      17:22:54.697 [e2-core] RotorCmd ffffffff, lastRotorCmd ffffffff
      17:22:54.697 [e2-core] prepare_sat System 1 Freq 11914500 Pol 0 SR 27500000 INV 2 FEC 9 orbpos 192 system 1 modulation 1 pilot 2, rolloff 0
      17:22:54.698 [e2-core] tuning to 1314 mhz
      17:22:54.698 [e2-core] OURSTATE: tuning
      17:22:54.698 [e2-core] allocate Channel: res 0
      17:22:54.698 [e2-core] allocate demux
      17:22:54.699 [e2-core] resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      17:22:54.699 [e2-core] resolve: -> /etc/scan_tp_valid_check.py
      17:22:54.702 [e2-core] setLCDBrightness 0
      17:22:54.703 [e2-python] [AutoShutDown] leave standby . . .
      17:22:54.704 [e2-python] [AutoShutDown] No ShutDownTimer to stop
      17:22:54.711 [e2-core] [SEC] set static current limiting
      17:22:54.711 [e2-core] [SEC] invalidate current switch params
      17:22:54.712 [e2-core] [SEC] setVoltage 2
      17:22:54.728 [e2-core] [SEC] sleep 10ms
      17:22:54.738 [e2-core] [SEC] setTone 1
      17:22:54.755 [e2-core] [SEC] sleep 10ms
      17:22:54.766 [e2-core] [SEC] update current switch params
      17:22:54.766 [e2-core] [SEC] startTuneTimeout 5000
      17:22:54.766 [e2-core] [SEC] setFrontend 1
      17:22:54.766 [e2-core] setting frontend 0
      17:22:54.767 [e2-core] [SEC] sleep 500ms
      17:22:55.417 [e2-core] (0)fe event: status 0, inversion off, m_tuning 1
      17:22:55.441 [e2-core] [SEC] set dynamic current limiting
      17:22:55.540 [e2-core] (0)fe event: status 1f, inversion off, m_tuning 2
      17:22:55.540 [e2-core] OURSTATE: ok
      17:22:55.540 [e2-core] [eDVBCAService] channel 0x24da818 running
      17:22:55.541 [e2-core] [eDVBLocalTimerHandler] channel 0x24da818 running
      17:22:55.541 [e2-core] no version filtering
      17:22:55.541 [e2-core] 0014: 70 00 00 00 00 00
      17:22:55.541 [e2-core] mask: fc 00 00 00 00 00
      17:22:55.542 [e2-core] mode: 00 00 00 00 00 00
      17:22:55.542 [e2-core] [eEPGCache] channel 0x24da818 running
      17:22:55.543 [e2-core] stop release channel timer
      17:22:55.543 [e2-core] no version filtering
      17:22:55.544 [e2-core] 0012: 4e 00 81 00 00 00
      17:22:55.544 [e2-core] mask: ff ff ff 00 00 00
      17:22:55.544 [e2-core] mode: 00 00 00 00 00 00
      17:22:55.545 [e2-core] [eEPGCache] next update in 2 sec
      17:22:55.549 [e2-core] ok ... now we start!!
      17:22:55.549 [e2-core] no version filtering
      17:22:55.549 [e2-core] 0000: 00 00 00 00 00 00
      17:22:55.549 [e2-core] mask: ff 00 00 00 00 00
      17:22:55.550 [e2-core] mode: 00 00 00 00 00 00
      17:22:55.550 [e2-core] eventNewProgramInfo 0 0
      17:22:55.551 [e2-core] have 1 video stream(s) (02ff), and 1 audio stream(s) (0303), and the pcr pid is 02ff, and the text pid is 0020
      17:22:55.551 [e2-core] allocate demux
      17:22:55.556 [e2-core] disable teletext subtitles
      17:22:55.558 [e2-core] decoder state: play, vpid=767, apid=771
      17:22:55.559 [e2-core] DMX_SET_PES_FILTER(0x2ff) - pcr - ok
      17:22:55.559 [e2-core] DEMUX_START - pcr - ok
      17:22:55.560 [e2-core] DMX_SET_PES_FILTER(0x303) - audio - ok
      17:22:55.560 [e2-core] DEMUX_START - audio - ok
      17:22:55.561 [e2-core] AUDIO_SET_BYPASS(0) - ok
      17:22:55.561 [e2-core] AUDIO_PAUSE - ok
      17:22:55.563 [e2-core] AUDIO_PLAY - ok
      17:22:55.564 [e2-core] Video Device: /dev/dvb/adapter0/video0
      17:22:55.564 [e2-core] demux device: /dev/dvb/adapter0/demux0
      17:22:55.564 [e2-core] VIDEO_SET_STREAMTYPE 1 - ok
      17:22:55.564 [e2-core] DMX_SET_PES_FILTER(0x2ff) - video - ok
      17:22:55.565 [e2-core] DEMUX_START - video - ok
      17:22:55.565 [e2-core] VIDEO_FREEZE - ok
      17:22:55.571 [e2-core] VIDEO_PLAY - ok
      17:22:55.571 [e2-core] DMX_SET_PES_FILTER(0x20) - ttx - ok
      17:22:55.571 [e2-core] DEMUX_START - ttx - ok
      17:22:55.576 [e2-core] VIDEO_SLOWMOTION(0) - ok
      17:22:55.577 [e2-core] VIDEO_FAST_FORWARD(0) - ok
      17:22:55.577 [e2-core] VIDEO_CONTINUE - ok
      17:22:55.577 [e2-core] AUDIO_CONTINUE - ok
      17:22:55.581 [e2-python] not pauseable.
      17:22:55.980 [e2-python] [AutoRes] service changed
      17:22:55.986 [e2-core] + 1/1 TID 00
      17:22:55.986 [e2-core] done!
      17:22:55.987 [e2-core] PATready
      17:22:55.987 [e2-core] use pmtpid 0062 for service_id 0081
      17:22:55.987 [e2-core] no version filtering
      17:22:55.988 [e2-core] 0062: 02 00 81 00 00 00
      17:22:55.988 [e2-core] mask: ff ff ff 00 00 00
      17:22:55.988 [e2-core] mode: 00 00 00 00 00 00
      17:22:55.989 [e2-core] doing version filtering
      17:22:55.989 [e2-core] 0000: 00 00 00 0d 00 00
      17:22:55.989 [e2-core] mask: ff 00 00 3f 00 00
      17:22:55.990 [e2-core] mode: 00 00 00 3e 00 00
      17:22:56.018 [e2-core] + 1/1 TID 02
      17:22:56.018 [e2-core] done!
      17:22:56.019 [e2-core] eventNewProgramInfo 0 0
      17:22:56.020 [e2-core] no version filtering
      17:22:56.020 [e2-core] 0030: 74 00 00 00 00 00
      17:22:56.020 [e2-core] mask: ff 00 00 00 00 00
      17:22:56.021 [e2-core] mode: 00 00 00 00 00 00
      17:22:56.022 [e2-core] have 1 video stream(s) (02ff), and 2 audio stream(s) (0302, 0303), and the pcr pid is 02ff, and the text pid is 0020
      17:22:56.023 [e2-core] decoder state: play, vpid=767, apid=771
      17:22:56.026 [e2-core] no version filtering
      17:22:56.026 [e2-core] 0030: 74 00 00 00 00 00
      17:22:56.026 [e2-core] mask: ff 00 00 00 00 00
      17:22:56.026 [e2-core] mode: 00 00 00 00 00 00
      17:22:56.094 [e2-core] [eDVBCAService] new service 1:0:19:81:6:85:C00000:0:0:0:
      17:22:56.100 [e2-core] [eDVBCAService] add demux 0 to slot 0 service 1:0:19:81:6:85:C00000:0:0:0:
      17:22:56.100 [e2-core] demux 0 mask 01 prevhash 00000000
      17:22:56.101 [e2-core] [eDVBCAService] send 72 bytes
      17:22:56.101 [e2-core] 9f 80 32 44 03 00 81 21 00 25 01 81 08 00 c0 00 00 00 06 00 85 82 02 01 00 84 02 00 62 09 04 09 c4 fb ba 09 04 09 af ff ba 09 04 09 8c fa ba 06 00 20 00 00 05 00 30 00 00 1b 02 ff 00 00 06 03 02 00 00 06 03 03 00 00
      17:22:56.102 [e2-core] doing version filtering
      17:22:56.102 [e2-core] 0062: 02 00 81 21 00 00
      17:22:56.102 [e2-core] mask: ff ff ff 3f 00 00
      17:22:56.102 [e2-core] mode: 00 00 00 3e 00 00
      17:22:56.441 [e2-core] + 1/1 TID 74
      17:22:56.441 [e2-core] done!
      17:22:56.442 [e2-core] AITready
      17:22:56.442 [e2-core] Section Length : 82, Total Section Length : 85
      17:22:56.442 [e2-core] found applicaions ids >> pid : ffffffff, orgid : 4, appid : 10
      17:22:56.443 [e2-core] Found : control[2], name[SKY], url[sky.spcode.tv/rb_sky.php]
      17:22:56.444 [e2-python] Name : SKY
      17:22:56.444 [e2-python] URL : sky.spcode.tv/rb_sky.php
      17:22:56.445 [e2-python] OrgID : 4
      17:22:56.446 [e2-python] AppID : 10
      17:22:56.446 [e2-python] Control Code : 2
      17:22:56.447 [e2-python] Profile Code : 0
      17:22:56.447 [e2-python]
      17:22:56.448 [e2-python] (2, 'SKY', 'http://sky.spcode.tv/rb_sky.php', 4, 10, 0)
      17:22:56.571 [e2-core] -+ 1/2 TID 4e
      17:22:57.021 [e2-python] [AutoRes] determineContent
      17:22:57.022 [e2-python] [AutoRes] switch deinterlacer mode to on
      17:22:57.023 [e2-python] [AutoRes] new content is 1920x1080i25
      17:22:57.024 [e2-python] [AutoRes] determined videomode 1080i
      17:22:57.104 [e2-core] sdt update done!
      17:22:57.209 [e2-core] [eDVBLocalTimerHandler] diff is -2
      17:22:57.210 [e2-core] [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      17:22:57.320 [e2-core] [eDVBLocalTimerHandler] update RTC
      17:22:57.320 [e2-core] [eDVBLocalTimerHandler] time update to 17:22:55
      17:22:57.320 [e2-core] [eDVBLocalTimerHandler] m_time_difference is -2
      17:22:57.320 [e2-core] [eDVBLocalTimerHandler] set Linux Time
      17:22:57.373 [e2-core] ++ 2/2 TID 4e
      17:22:57.373 [e2-core] done!
      17:22:57.464 [e2-core] doing version filtering
      17:22:57.464 [e2-core] 0012: 4e 00 81 1f 00 00
      17:22:57.464 [e2-core] mask: ff ff ff 3f 00 00
      17:22:57.465 [e2-core] mode: 00 00 00 3e 00 00
      17:22:57.535 [e2-core] [eEPGCache] start caching events(1455812577)
      17:22:58.316 [e2-python] action -> InfobarChannelSelection openServiceList
      17:23:01.847 [e2-python] action -> OkCancelActions ok
      17:23:01.849 [e2-python] playing service..
      17:23:01.850 [e2-core] [eDVBCAService] free slot 0 demux 0 for service 1:0:19:81:6:85:C00000:0:0:0:
      17:23:01.850 [e2-core] [eDVBCAService] free service 1:0:19:81:6:85:C00000:0:0:0:
      17:23:01.865 [e2-core] decoder state: play, vpid=-1, apid=-1
      17:23:01.865 [e2-core] DEMUX_STOP - pcr - ok
      17:23:01.866 [e2-core] DEMUX_STOP - video - ok
      17:23:01.867 [e2-core] VIDEO_STOP - ok
      17:23:01.889 [e2-core] AUDIO_STOP - ok
      17:23:01.890 [e2-core] DEMUX_STOP - audio - ok
      17:23:01.890 [e2-core] AUDIO_CONTINUE - ok
      17:23:01.890 [e2-core] DEMUX_STOP - ttx - ok
      17:23:01.896 [e2-core] start release channel timer
      17:23:01.919 [e2-python] not pauseable.
      17:23:01.921 [e2-python] RemovePopup, id = ZapError
      17:23:01.921 [e2-core] [eDVBCAService] remove channel 0x24da818
      17:23:01.922 [e2-core] [eDVBLocalTimerHandler] remove channel 0x24da818
      17:23:01.922 [e2-core] [eEPGCache] remove channel 0x24da818
      17:23:01.923 [e2-core] [eEPGCache] abort caching events !!
      17:23:01.928 [e2-core] allocate channel.. 0009:0085
      17:23:01.930 [e2-core] [eDVBCAService] new channel 0x24da818!
      17:23:01.930 [e2-core] (0)tune
      17:23:01.931 [e2-core] RotorCmd ffffffff, lastRotorCmd ffffffff
      17:23:01.931 [e2-core] prepare_sat System 1 Freq 11170750 Pol 0 SR 22000000 INV 2 FEC 3 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      17:23:01.931 [e2-core] tuning to 1420 mhz
      17:23:01.931 [e2-core] OURSTATE: tuning
      17:23:01.932 [e2-core] allocate Channel: res 0
      17:23:01.932 [e2-core] allocate demux
      17:23:01.932 [e2-core] resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      17:23:01.933 [e2-core] resolve: -> /etc/scan_tp_valid_check.py
      17:23:01.944 [e2-core] [SEC] set static current limiting
      17:23:02.024 [e2-core] [SEC] invalidate current switch params
      17:23:02.051 [e2-core] set sequence pos 3
      17:23:02.243 [e2-core] [SEC] setTone 0
      17:23:02.259 [e2-core] [SEC] sleep 10ms
      17:23:02.269 [e2-core] [SEC] update current switch params
      17:23:02.270 [e2-core] [SEC] startTuneTimeout 5000
      17:23:02.270 [e2-core] [SEC] setFrontend 1
      17:23:02.270 [e2-core] setting frontend 0
      17:23:02.272 [e2-core] [SEC] sleep 500ms
      17:23:02.922 [e2-core] (0)fe event: status 0, inversion off, m_tuning 1
      17:23:02.940 [e2-core] [SEC] set dynamic current limiting
      17:23:03.043 [e2-core] (0)fe event: status 1f, inversion off, m_tuning 2
      17:23:03.043 [e2-core] OURSTATE: ok
      17:23:03.043 [e2-core] [eDVBCAService] channel 0x24da818 running
      17:23:03.044 [e2-core] [eDVBLocalTimerHandler] channel 0x24da818 running
      17:23:03.044 [e2-core] no version filtering
      17:23:03.044 [e2-core] 0014: 70 00 00 00 00 00
      17:23:03.044 [e2-core] mask: fc 00 00 00 00 00
      17:23:03.045 [e2-core] mode: 00 00 00 00 00 00
      17:23:03.045 [e2-core] [eEPGCache] channel 0x24da818 running
      17:23:03.046 [e2-core] [eEPGCache] next update in 2 sec
      17:23:03.046 [e2-core] stop release channel timer
      17:23:03.047 [e2-core] no version filtering
      17:23:03.047 [e2-core] 0012: 4e 00 6d 00 00 00
      17:23:03.047 [e2-core] mask: ff ff ff 00 00 00
      17:23:03.048 [e2-core] mode: 00 00 00 00 00 00
      17:23:03.051 [e2-core] ok ... now we start!!
      17:23:03.052 [e2-core] no version filtering
      17:23:03.052 [e2-core] 0000: 00 00 00 00 00 00
      17:23:03.052 [e2-core] mask: ff 00 00 00 00 00
      17:23:03.052 [e2-core] mode: 00 00 00 00 00 00
      17:23:03.053 [e2-core] eventNewProgramInfo 0 0
      17:23:03.053 [e2-core] have 1 video stream(s) (04ff), and 1 audio stream(s) (0503), and the pcr pid is 04ff, and the text pid is 0020
      17:23:03.054 [e2-core] allocate demux
      17:23:03.059 [e2-core] disable teletext subtitles
      17:23:03.061 [e2-core] decoder state: play, vpid=1279, apid=1283
      17:23:03.061 [e2-core] DMX_SET_PES_FILTER(0x4ff) - pcr - ok
      17:23:03.062 [e2-core] DEMUX_START - pcr - ok
      17:23:03.062 [e2-core] DMX_SET_PES_FILTER(0x503) - audio - ok
      17:23:03.063 [e2-core] DEMUX_START - audio - ok
      17:23:03.063 [e2-core] AUDIO_SET_BYPASS(0) - ok
      17:23:03.063 [e2-core] AUDIO_PAUSE - ok
      17:23:03.065 [e2-core] AUDIO_PLAY - ok
      17:23:03.065 [e2-core] Video Device: /dev/dvb/adapter0/video0
      17:23:03.066 [e2-core] demux device: /dev/dvb/adapter0/demux0
      17:23:03.066 [e2-core] VIDEO_SET_STREAMTYPE 1 - ok
      17:23:03.066 [e2-core] DMX_SET_PES_FILTER(0x4ff) - video - ok
      17:23:03.067 [e2-core] DEMUX_START - video - ok
      17:23:03.067 [e2-core] VIDEO_FREEZE - ok
      17:23:03.073 [e2-core] VIDEO_PLAY - ok
      17:23:03.073 [e2-core] DMX_SET_PES_FILTER(0x20) - ttx - ok
      17:23:03.073 [e2-core] DEMUX_START - ttx - ok
      17:23:03.078 [e2-core] VIDEO_SLOWMOTION(0) - ok
      17:23:03.078 [e2-core] VIDEO_FAST_FORWARD(0) - ok
      17:23:03.079 [e2-core] VIDEO_CONTINUE - ok
      17:23:03.079 [e2-core] AUDIO_CONTINUE - ok
      17:23:03.081 [e2-python] not pauseable.
      17:23:03.144 [e2-python] [AutoRes] service changed
      17:23:03.172 [e2-core] + 1/1 TID 00
      17:23:03.173 [e2-core] done!
      17:23:03.174 [e2-core] PATready
      17:23:03.174 [e2-core] use pmtpid 0064 for service_id 006d
      17:23:03.174 [e2-core] no version filtering
      17:23:03.175 [e2-core] 0064: 02 00 6d 00 00 00
      17:23:03.175 [e2-core] mask: ff ff ff 00 00 00
      17:23:03.175 [e2-core] mode: 00 00 00 00 00 00
      17:23:03.176 [e2-core] doing version filtering
      17:23:03.176 [e2-core] 0000: 00 00 00 17 00 00
      17:23:03.176 [e2-core] mask: ff 00 00 3f 00 00
      17:23:03.177 [e2-core] mode: 00 00 00 3e 00 00
      17:23:03.211 [e2-core] + 1/1 TID 02
      17:23:03.211 [e2-core] done!
      17:23:03.212 [e2-core] eventNewProgramInfo 0 0
      17:23:03.213 [e2-core] have 1 video stream(s) (04ff), and 2 audio stream(s) (0503, 0504), and the pcr pid is 04ff, and the text pid is 0020
      17:23:03.214 [e2-core] decoder state: play, vpid=1279, apid=1283
      17:23:03.324 [e2-core] [eDVBCAService] new service 1:0:19:6D:9:85:C00000:0:0:0:
      17:23:03.325 [e2-core] [eDVBCAService] add demux 0 to slot 0 service 1:0:19:6D:9:85:C00000:0:0:0:
      17:23:03.325 [e2-core] demux 0 mask 01 prevhash 00000000
      17:23:03.326 [e2-core] [eDVBCAService] send 61 bytes
      17:23:03.326 [e2-core] 9f 80 32 39 03 00 6d 1b 00 1f 01 81 08 00 c0 00 00 00 09 00 85 82 02 01 00 84 02 00 64 09 04 09 c4 fb 67 09 04 09 8c fa 67 06 00 20 00 00 1b 04 ff 00 00 06 05 03 00 00 06 05 04 00 00
      17:23:03.327 [e2-core] doing version filtering
      17:23:03.327 [e2-core] 0064: 02 00 6d 1b 00 00
      17:23:03.327 [e2-core] mask: ff ff ff 3f 00 00
      17:23:03.328 [e2-core] mode: 00 00 00 3e 00 00
      17:23:03.704 [e2-core] [eDVBLocalTimerHandler] diff is -2
      17:23:03.704 [e2-core] [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      17:23:03.814 [e2-core] [eDVBLocalTimerHandler] update RTC
      17:23:03.815 [e2-core] [eDVBLocalTimerHandler] time update to 17:23:01
      17:23:03.815 [e2-core] [eDVBLocalTimerHandler] m_time_difference is -2
      17:23:03.815 [e2-core] [eDVBLocalTimerHandler] set Linux Time
      17:23:01.816 [e2-core] -+ 1/2 TID 4e
      17:23:04.135 [e2-python] [AutoRes] determineContent
      17:23:04.136 [e2-python] [AutoRes] switch deinterlacer mode to on
      17:23:04.137 [e2-python] [AutoRes] new content is 1920x1080i25
      17:23:04.137 [e2-python] [AutoRes] determined videomode 1080i
      17:23:04.481 [e2-core] ++ 2/2 TID 4e
      17:23:04.481 [e2-core] done!
      17:23:04.510 [e2-core] doing version filtering
      17:23:04.510 [e2-core] 0012: 4e 00 6d 2f 00 00
      17:23:04.511 [e2-core] mask: ff ff ff 3f 00 00
      17:23:04.511 [e2-core] mode: 00 00 00 3e 00 00
      17:23:05.042 [e2-core] [eEPGCache] start caching events(1455812585)
      17:23:05.186 [e2-core] sdt update done!
      17:23:12.048 [e2-core] [eEPGCache] abort non avail schedule other reading
      17:23:12.050 [e2-core] [eEPGCache] abort non avail viasat reading
      17:23:12.050 [e2-core] [eEPGCache] abort non avail mhw reading
      17:23:12.052 [e2-core] [eEPGCache] nownext finished(1455812592)
      17:23:13.135 [e2-python] [92m[EPG Share] Grab Channel EPG[0m
      17:23:13.136 [e2-python] [92m[EPG Share] †Eurosp‡ort †2‡ †HD‡ 1:0:19:6D:9:85:C00000:0:0:0:[0m
      17:23:13.149 [e2-python] [92m[EPG Share] Count 69 from 69 Events[0m
      17:23:13.372 [e2-python] <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
      <html><head>
      <title>404 Not Found</title>
      </head><body>
      <h1>Not Found</h1>
      <p>The requested URL /import_epg.php was not found on this server.</p>
      <hr>
      <address>Apache Server at achansel.lima-city.de Port 80</address>
      </body></html>
      17:23:13.372 [e2-python]
      17:23:15.201 [e2-core] [eEPGCache] schedule finished(1455812595)
      17:23:15.202 [e2-core] [eEPGCache] stop caching events(1455812595)
      17:23:15.202 [e2-core] [eEPGCache] next update in 60 min
      17:23:23.050 [e2-core] no ancillary data in audio stream... abort radiotext pes parser
      17:24:58.905 [e2-python] AT plugin not found
      17:24:58.906 [e2-python] ER plugin not found
      17:24:58.911 [e2-python] AT plugin not found
      17:24:58.912 [e2-python] ER plugin not found
      17:24:58.916 [e2-python] AT plugin not found
      17:24:58.918 [e2-python] ER plugin not found
      17:24:58.923 [e2-python] AT plugin not found
      17:24:58.924 [e2-python] ER plugin not found
      17:24:58.929 [e2-python] AT plugin not found
      17:24:58.930 [e2-python] ER plugin not found
      17:24:58.934 [e2-python] AT plugin not found
      17:24:58.935 [e2-python] ER plugin not found
      17:24:58.938 [e2-python] [OpenWebif] page 'http://zc.qq.com/cgi-bin/common/attr?id=260714&r=0.2344367919262284' not found
      17:26:00.499 [e2-python] action -> InfobarChannelSelection openServiceList
      17:26:02.483 [e2-python] action -> ChannelSelectEPGActions showEPGList
      17:26:02.651 [e2-python] [EPGView] select current service
      17:26:07.200 [e2-python] action -> OkCancelActions cancel
      17:26:07.898 [e2-python] action -> OkCancelActions cancel
      17:26:08.469 [e2-python] action -> InfobarChannelSelection openServiceList
      17:26:19.017 [e2-python] action -> ChannelSelectBaseActions prevBouquet
      17:26:20.801 [e2-python] action -> OkCancelActions cancel
      17:27:25.719 [e2-python] action -> GlobalActions power_down
      17:27:25.960 [e2-python] enter standby
      17:27:25.962 [e2-python] stopService
      17:27:25.963 [e2-core] [eDVBCAService] free slot 0 demux 0 for service 1:0:19:6D:9:85:C00000:0:0:0:
      17:27:25.963 [e2-core] [eDVBCAService] free service 1:0:19:6D:9:85:C00000:0:0:0:
      17:27:25.973 [e2-core] decoder state: play, vpid=-1, apid=-1
      17:27:25.974 [e2-core] DEMUX_STOP - pcr - ok
      17:27:25.975 [e2-core] DEMUX_STOP - video - ok
      17:27:25.976 [e2-core] VIDEO_STOP - ok
      17:27:25.982 [e2-core] AUDIO_STOP - ok
      17:27:25.983 [e2-core] DEMUX_STOP - audio - ok
      17:27:25.983 [e2-core] AUDIO_CONTINUE - ok
      17:27:25.983 [e2-core] DEMUX_STOP - ttx - ok
      17:27:25.989 [e2-core] start release channel timer
      17:27:26.063 [e2-core] setLCDBrightness 0
      17:27:27.165 [e2-python] [AutoShutDown] go to standby . . .
      17:27:27.166 [e2-python] [AutoShutDown] No inactivity timer to stop
      17:27:28.989 [e2-core] release cached channel (timer timeout)
      17:27:28.989 [e2-core] [eDVBCAService] remove channel 0x24da818
      17:27:28.990 [e2-core] [eDVBLocalTimerHandler] remove channel 0x24da818
      17:27:28.990 [e2-core] [eEPGCache] remove channel 0x24da818
      17:27:28.991 [e2-core] stop release channel timer
      17:27:31.993 [e2-core] close frontend 0
      17:30:04.243 [e2-core] child has terminated
      17:30:04.244 [e2-core] pipes closed
      17:30:04.246 [e2-core] child has terminated
      17:30:04.246 [e2-core] pipes closed
      17:30:14.219 [e2-core] child has terminated
      17:30:14.219 [e2-core] pipes closed
      17:32:44.406 [e2-python] AtileHD lookup for ID 656853
      17:38:33.203 [e2-core] child has terminated
      17:38:33.204 [e2-core] pipes closed
      17:42:44.406 [e2-python] AtileHD lookup for ID 656853
      17:49:03.203 [e2-core] child has terminated
      17:49:03.203 [e2-core] pipes closed
      17:52:44.406 [e2-python] AtileHD lookup for ID 656853
      17:57:28.990 [e2-core] [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
      17:57:29.050 [e2-core] [eDVBLocalTimerHandler] RTC time is 17:57:26
      17:57:29.050 [e2-core] [eDVBLocalTimerHandler] Receiver time is 17:57:29
      17:57:29.050 [e2-core] [eDVBLocalTimerHandler] RTC to Receiver time difference is 3 seconds
      17:57:29.051 [e2-core] [eDVBLocalTimerHandler] set Linux Time to RTC Time
      18:02:44.396 [e2-python] AtileHD lookup for ID 656853
      18:09:03.193 [e2-core] child has terminated
      18:09:03.193 [e2-core] pipes closed
      18:12:44.396 [e2-python] AtileHD lookup for ID 656853
      18:19:03.192 [e2-core] child has terminated
      18:19:03.193 [e2-core] pipes closed
      18:22:44.396 [e2-python] AtileHD lookup for ID 656853
      18:27:29.041 [e2-core] [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
      18:27:29.101 [e2-core] [eDVBLocalTimerHandler] RTC time is 18:27:26
      18:27:29.101 [e2-core] [eDVBLocalTimerHandler] Receiver time is 18:27:29
      18:27:29.102 [e2-core] [eDVBLocalTimerHandler] RTC to Receiver time difference is 3 seconds
      18:27:29.102 [e2-core] [eDVBLocalTimerHandler] set Linux Time to RTC Time
      18:30:00.678 [e2-core] child has terminated
      18:30:00.678 [e2-core] pipes closed
      18:30:00.680 [e2-core] child has terminated
      18:30:00.680 [e2-core] pipes closed
      18:30:10.643 [e2-core] child has terminated
      18:30:10.644 [e2-core] pipes closed
      18:32:44.386 [e2-python] AtileHD lookup for ID 656853
      18:39:03.182 [e2-core] child has terminated
      18:39:03.182 [e2-core] pipes closed
      18:42:44.386 [e2-python] AtileHD lookup for ID 656853
      18:49:03.182 [e2-core] child has terminated
      18:49:03.182 [e2-core] pipes closed
      18:52:44.386 [e2-python] AtileHD lookup for ID 656853
      18:57:29.092 [e2-core] [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
      18:57:29.152 [e2-core] [eDVBLocalTimerHandler] RTC time is 18:57:26
      18:57:29.152 [e2-core] [eDVBLocalTimerHandler] Receiver time is 18:57:29
      18:57:29.152 [e2-core] [eDVBLocalTimerHandler] RTC to Receiver time difference is 3 seconds
      18:57:29.152 [e2-core] [eDVBLocalTimerHandler] set Linux Time to RTC Time
      19:02:44.376 [e2-python] AtileHD lookup for ID 656853
      19:05:37.744 [e2-python] action -> StandbyActions power
      19:05:37.745 [e2-python] leave standby
      19:05:38.126 [e2-python] RemovePopup, id = goStandby
      19:05:38.134 [e2-python] playing service..
      19:05:38.146 [e2-python] not pauseable.
      19:05:38.147 [e2-python] RemovePopup, id = ZapError
      19:05:38.148 [e2-core] allocate channel.. 0009:0085
      19:05:38.148 [e2-core] opening frontend 0
      19:05:38.182 [e2-core] [eDVBCAService] new channel 0x135e870!
      19:05:38.183 [e2-core] (0)tune
      19:05:38.183 [e2-core] RotorCmd ffffffff, lastRotorCmd ffffffff
      19:05:38.183 [e2-core] prepare_sat System 1 Freq 11170750 Pol 0 SR 22000000 INV 2 FEC 3 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      19:05:38.184 [e2-core] tuning to 1420 mhz
      19:05:38.184 [e2-core] OURSTATE: tuning
      19:05:38.184 [e2-core] allocate Channel: res 0
      19:05:38.184 [e2-core] allocate demux
      19:05:38.185 [e2-core] resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      19:05:38.185 [e2-core] resolve: -> /etc/scan_tp_valid_check.py
      19:05:38.188 [e2-core] setLCDBrightness 0
      19:05:38.189 [e2-python] [AutoShutDown] leave standby . . .
      19:05:38.189 [e2-python] [AutoShutDown] No ShutDownTimer to stop
      19:05:38.197 [e2-core] [SEC] set static current limiting
      19:05:38.197 [e2-core] [SEC] invalidate current switch params
      19:05:38.198 [e2-core] [SEC] setVoltage 2
      19:05:38.214 [e2-core] [SEC] sleep 10ms
      19:05:38.224 [e2-core] set sequence pos 3
      19:05:38.225 [e2-core] [SEC] update current switch params
      19:05:38.225 [e2-core] [SEC] startTuneTimeout 5000
      19:05:38.226 [e2-core] [SEC] setFrontend 1
      19:05:38.226 [e2-core] setting frontend 0
      19:05:38.226 [e2-core] [SEC] sleep 500ms
      19:05:38.877 [e2-core] (0)fe event: status 0, inversion off, m_tuning 1
      19:05:38.899 [e2-core] [SEC] set dynamic current limiting
      19:05:38.997 [e2-core] (0)fe event: status 1f, inversion off, m_tuning 2
      19:05:38.997 [e2-core] OURSTATE: ok
      19:05:38.998 [e2-core] [eDVBCAService] channel 0x135e870 running
      19:05:38.998 [e2-core] [eDVBLocalTimerHandler] channel 0x135e870 running
      19:05:38.998 [e2-core] no version filtering
      19:05:38.998 [e2-core] 0014: 70 00 00 00 00 00
      19:05:38.999 [e2-core] mask: fc 00 00 00 00 00
      19:05:38.999 [e2-core] mode: 00 00 00 00 00 00
      19:05:38.999 [e2-core] [eEPGCache] channel 0x135e870 running
      19:05:39.000 [e2-core] stop release channel timer
      19:05:39.000 [e2-core] [eEPGCache] next update in 2 sec
      19:05:39.001 [e2-core] no version filtering
      19:05:39.001 [e2-core] 0012: 4e 00 6d 00 00 00
      19:05:39.001 [e2-core] mask: ff ff ff 00 00 00
      19:05:39.001 [e2-core] mode: 00 00 00 00 00 00
      19:05:39.004 [e2-core] ok ... now we start!!
      19:05:39.004 [e2-core] no version filtering
      19:05:39.004 [e2-core] 0000: 00 00 00 00 00 00
      19:05:39.005 [e2-core] mask: ff 00 00 00 00 00
      19:05:39.005 [e2-core] mode: 00 00 00 00 00 00
      19:05:39.006 [e2-core] eventNewProgramInfo 0 0
      19:05:39.006 [e2-core] have 1 video stream(s) (04ff), and 1 audio stream(s) (0503), and the pcr pid is 04ff, and the text pid is 0020
      19:05:39.007 [e2-core] allocate demux
      19:05:39.012 [e2-core] disable teletext subtitles
      19:05:39.014 [e2-core] decoder state: play, vpid=1279, apid=1283
      19:05:39.014 [e2-core] DMX_SET_PES_FILTER(0x4ff) - pcr - ok
      19:05:39.014 [e2-core] DEMUX_START - pcr - ok
      19:05:39.015 [e2-core] DMX_SET_PES_FILTER(0x503) - audio - ok
      19:05:39.015 [e2-core] DEMUX_START - audio - ok
      19:05:39.015 [e2-core] AUDIO_SET_BYPASS(0) - ok
      19:05:39.016 [e2-core] AUDIO_PAUSE - ok
      19:05:39.018 [e2-core] AUDIO_PLAY - ok
      19:05:39.018 [e2-core] Video Device: /dev/dvb/adapter0/video0
      19:05:39.019 [e2-core] demux device: /dev/dvb/adapter0/demux0
      19:05:39.019 [e2-core] VIDEO_SET_STREAMTYPE 1 - ok
      19:05:39.019 [e2-core] DMX_SET_PES_FILTER(0x4ff) - video - ok
      19:05:39.020 [e2-core] DEMUX_START - video - ok
      19:05:39.020 [e2-core] VIDEO_FREEZE - ok
      19:05:39.025 [e2-core] VIDEO_PLAY - ok
      19:05:39.026 [e2-core] DMX_SET_PES_FILTER(0x20) - ttx - ok
      19:05:39.026 [e2-core] DEMUX_START - ttx - ok
      19:05:39.031 [e2-core] VIDEO_SLOWMOTION(0) - ok
      19:05:39.031 [e2-core] VIDEO_FAST_FORWARD(0) - ok
      19:05:39.031 [e2-core] VIDEO_CONTINUE - ok
      19:05:39.032 [e2-core] AUDIO_CONTINUE - ok
      19:05:39.033 [e2-python] not pauseable.
      19:05:39.434 [e2-python] [AutoRes] service changed
      19:05:39.440 [e2-core] + 1/1 TID 00
      19:05:39.441 [e2-core] done!
      19:05:39.442 [e2-core] PATready
      19:05:39.442 [e2-core] use pmtpid 0064 for service_id 006d
      19:05:39.442 [e2-core] no version filtering
      19:05:39.442 [e2-core] 0064: 02 00 6d 00 00 00
      19:05:39.443 [e2-core] mask: ff ff ff 00 00 00
      19:05:39.443 [e2-core] mode: 00 00 00 00 00 00
      19:05:39.444 [e2-core] doing version filtering
      19:05:39.444 [e2-core] 0000: 00 00 00 17 00 00
      19:05:39.444 [e2-core] mask: ff 00 00 3f 00 00
      19:05:39.444 [e2-core] mode: 00 00 00 3e 00 00
      19:05:39.555 [e2-core] + 1/1 TID 02
      19:05:39.555 [e2-core] done!
      19:05:39.556 [e2-core] eventNewProgramInfo 0 0
      19:05:39.557 [e2-core] have 1 video stream(s) (04ff), and 2 audio stream(s) (0503, 0504), and the pcr pid is 04ff, and the text pid is 0020
      19:05:39.558 [e2-core] decoder state: play, vpid=1279, apid=1283
      19:05:39.622 [e2-core] [eDVBCAService] new service 1:0:19:6D:9:85:C00000:0:0:0:
      19:05:39.622 [e2-core] [eDVBCAService] add demux 0 to slot 0 service 1:0:19:6D:9:85:C00000:0:0:0:
      19:05:39.622 [e2-core] demux 0 mask 01 prevhash 00000000
      19:05:39.624 [e2-core] [eDVBCAService] send 61 bytes
      19:05:39.625 [e2-core] 9f 80 32 39 03 00 6d 1b 00 1f 01 81 08 00 c0 00 00 00 09 00 85 82 02 01 00 84 02 00 64 09 04 09 c4 fb 67 09 04 09 8c fa 67 06 00 20 00 00 1b 04 ff 00 00 06 05 03 00 00 06 05 04 00 00
      19:05:39.625 [e2-core] doing version filtering
      19:05:39.626 [e2-core] 0064: 02 00 6d 1b 00 00
      19:05:39.626 [e2-core] mask: ff ff ff 3f 00 00
      19:05:39.626 [e2-core] mode: 00 00 00 3e 00 00
      19:05:39.628 [e2-core] -+ 1/2 TID 4e
      19:05:40.539 [e2-python] [AutoRes] determineContent
      19:05:40.540 [e2-python] [AutoRes] switch deinterlacer mode to on
      19:05:40.541 [e2-python] [AutoRes] new content is 1920x1080i25
      19:05:40.542 [e2-python] [AutoRes] determined videomode 1080i
      19:05:40.543 [e2-core] ++ 2/2 TID 4e
      19:05:40.543 [e2-core] done!
      19:05:40.637 [e2-core] doing version filtering
      19:05:40.637 [e2-core] 0012: 4e 00 6d 33 00 00
      19:05:40.637 [e2-core] mask: ff ff ff 3f 00 00
      19:05:40.637 [e2-core] mode: 00 00 00 3e 00 00
      19:05:40.641 [e2-python] action -> InfobarChannelSelection openServiceList
      19:05:40.980 [e2-core] sdt update done!
      19:05:41.005 [e2-core] [eEPGCache] start caching events(1455818741)
      19:05:42.072 [e2-core] [eDVBLocalTimerHandler] diff is -2
      19:05:42.072 [e2-core] [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      19:05:42.182 [e2-core] [eDVBLocalTimerHandler] update RTC
      19:05:42.183 [e2-core] [eDVBLocalTimerHandler] time update to 19:05:40
      19:05:42.183 [e2-core] [eDVBLocalTimerHandler] m_time_difference is -2
      19:05:42.183 [e2-core] [eDVBLocalTimerHandler] set Linux Time
      19:05:43.003 [e2-python] action -> OkCancelActions ok
      19:05:43.005 [e2-python] playing service..
      19:05:43.006 [e2-core] [eDVBCAService] free slot 0 demux 0 for service 1:0:19:6D:9:85:C00000:0:0:0:
      19:05:43.007 [e2-core] [eDVBCAService] free service 1:0:19:6D:9:85:C00000:0:0:0:
      19:05:43.023 [e2-core] decoder state: play, vpid=-1, apid=-1
      19:05:43.024 [e2-core] DEMUX_STOP - pcr - ok
      19:05:43.025 [e2-core] DEMUX_STOP - video - ok
      19:05:43.026 [e2-core] VIDEO_STOP - ok
      19:05:43.047 [e2-core] AUDIO_STOP - ok
      19:05:43.048 [e2-core] DEMUX_STOP - audio - ok
      19:05:43.048 [e2-core] AUDIO_CONTINUE - ok
      19:05:43.049 [e2-core] DEMUX_STOP - ttx - ok
      19:05:43.054 [e2-core] start release channel timer
      19:05:43.074 [e2-python] not pauseable.
      19:05:43.075 [e2-python] RemovePopup, id = ZapError
      19:05:43.075 [e2-core] [eDVBCAService] remove channel 0x135e870
      19:05:43.076 [e2-core] [eDVBLocalTimerHandler] remove channel 0x135e870
      19:05:43.076 [e2-core] [eEPGCache] remove channel 0x135e870
      19:05:43.077 [e2-core] [eEPGCache] abort caching events !!
      19:05:43.082 [e2-core] allocate channel.. 0006:0085
      19:05:43.084 [e2-core] [eDVBCAService] new channel 0x227b660!
      19:05:43.085 [e2-core] (0)tune
      19:05:43.085 [e2-core] RotorCmd ffffffff, lastRotorCmd ffffffff
      19:05:43.085 [e2-core] prepare_sat System 1 Freq 11914500 Pol 0 SR 27500000 INV 2 FEC 9 orbpos 192 system 1 modulation 1 pilot 2, rolloff 0
      19:05:43.086 [e2-core] tuning to 1314 mhz
      19:05:43.086 [e2-core] OURSTATE: tuning
      19:05:43.086 [e2-core] allocate Channel: res 0
      19:05:43.086 [e2-core] allocate demux
      19:05:43.087 [e2-core] resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      19:05:43.087 [e2-core] resolve: -> /etc/scan_tp_valid_check.py
      19:05:43.121 [e2-core] [SEC] set static current limiting
      19:05:43.201 [e2-core] [SEC] invalidate current switch params
      19:05:43.388 [e2-core] set sequence pos 3
      19:05:43.389 [e2-core] [SEC] setTone 1
      19:05:43.405 [e2-core] [SEC] sleep 10ms
      19:05:43.415 [e2-core] [SEC] update current switch params
      19:05:43.416 [e2-core] [SEC] startTuneTimeout 5000
      19:05:43.416 [e2-core] [SEC] setFrontend 1
      19:05:43.416 [e2-core] setting frontend 0
      19:05:43.417 [e2-core] [SEC] sleep 500ms
      19:05:44.056 [e2-core] (0)fe event: status 0, inversion off, m_tuning 1
      19:05:44.058 [e2-core] [SEC] set dynamic current limiting
      19:05:44.175 [e2-core] (0)fe event: status 1f, inversion off, m_tuning 2
      19:05:44.176 [e2-core] OURSTATE: ok
      19:05:44.176 [e2-core] [eDVBCAService] channel 0x227b660 running
      19:05:44.176 [e2-core] [eDVBLocalTimerHandler] channel 0x227b660 running
      19:05:44.176 [e2-core] no version filtering
      19:05:44.177 [e2-core] 0014: 70 00 00 00 00 00
      19:05:44.177 [e2-core] mask: fc 00 00 00 00 00
      19:05:44.177 [e2-core] mode: 00 00 00 00 00 00
      19:05:44.178 [e2-core] [eEPGCache] channel 0x227b660 running
      19:05:44.179 [e2-core] [eEPGCache] next update in 2 sec
      19:05:44.179 [e2-core] stop release channel timer
      19:05:44.179 [e2-core] no version filtering
      19:05:44.180 [e2-core] 0012: 4e 00 81 00 00 00
      19:05:44.180 [e2-core] mask: ff ff ff 00 00 00
      19:05:44.180 [e2-core] mode: 00 00 00 00 00 00
      19:05:44.183 [e2-core] ok ... now we start!!
      19:05:44.184 [e2-core] no version filtering
      19:05:44.184 [e2-core] 0000: 00 00 00 00 00 00
      19:05:44.184 [e2-core] mask: ff 00 00 00 00 00
      19:05:44.185 [e2-core] mode: 00 00 00 00 00 00
      19:05:44.185 [e2-core] eventNewProgramInfo 0 0
      19:05:44.186 [e2-core] have 1 video stream(s) (02ff), and 1 audio stream(s) (0303), and the pcr pid is 02ff, and the text pid is 0020
      19:05:44.186 [e2-core] allocate demux
      19:05:44.191 [e2-core] disable teletext subtitles
      19:05:44.193 [e2-core] decoder state: play, vpid=767, apid=771
      19:05:44.193 [e2-core] DMX_SET_PES_FILTER(0x2ff) - pcr - ok
      19:05:44.194 [e2-core] DEMUX_START - pcr - ok
      19:05:44.194 [e2-core] DMX_SET_PES_FILTER(0x303) - audio - ok
      19:05:44.194 [e2-core] DEMUX_START - audio - ok
      19:05:44.195 [e2-core] AUDIO_SET_BYPASS(0) - ok
      19:05:44.196 [e2-core] AUDIO_PAUSE - ok
      19:05:44.198 [e2-core] AUDIO_PLAY - ok
      19:05:44.198 [e2-core] Video Device: /dev/dvb/adapter0/video0
      19:05:44.199 [e2-core] demux device: /dev/dvb/adapter0/demux0
      19:05:44.199 [e2-core] VIDEO_SET_STREAMTYPE 1 - ok
      19:05:44.199 [e2-core] DMX_SET_PES_FILTER(0x2ff) - video - ok
      19:05:44.200 [e2-core] DEMUX_START - video - ok
      19:05:44.200 [e2-core] VIDEO_FREEZE - ok
      19:05:44.206 [e2-core] VIDEO_PLAY - ok
      19:05:44.206 [e2-core] DMX_SET_PES_FILTER(0x20) - ttx - ok
      19:05:44.207 [e2-core] DEMUX_START - ttx - ok
      19:05:44.211 [e2-core] VIDEO_SLOWMOTION(0) - ok
      19:05:44.212 [e2-core] VIDEO_FAST_FORWARD(0) - ok
      19:05:44.212 [e2-core] VIDEO_CONTINUE - ok
      19:05:44.213 [e2-core] AUDIO_CONTINUE - ok
      19:05:44.214 [e2-python] not pauseable.
      19:05:44.279 [e2-python] [AutoRes] service changed
      19:05:44.283 [e2-core] + 1/1 TID 00
      19:05:44.284 [e2-core] done!
      19:05:44.285 [e2-core] PATready
      19:05:44.285 [e2-core] use pmtpid 0062 for service_id 0081
      19:05:44.286 [e2-core] no version filtering
      19:05:44.286 [e2-core] 0062: 02 00 81 00 00 00
      19:05:44.287 [e2-core] mask: ff ff ff 00 00 00
      19:05:44.287 [e2-core] mode: 00 00 00 00 00 00
      19:05:44.288 [e2-core] doing version filtering
      19:05:44.288 [e2-core] 0000: 00 00 00 0d 00 00
      19:05:44.289 [e2-core] mask: ff 00 00 3f 00 00
      19:05:44.289 [e2-core] mode: 00 00 00 3e 00 00
      19:05:44.335 [e2-core] + 1/1 TID 02
      19:05:44.336 [e2-core] done!
      19:05:44.336 [e2-core] eventNewProgramInfo 0 0
      19:05:44.337 [e2-core] no version filtering
      19:05:44.337 [e2-core] 0030: 74 00 00 00 00 00
      19:05:44.337 [e2-core] mask: ff 00 00 00 00 00
      19:05:44.337 [e2-core] mode: 00 00 00 00 00 00
      19:05:44.340 [e2-core] have 1 video stream(s) (02ff), and 2 audio stream(s) (0302, 0303), and the pcr pid is 02ff, and the text pid is 0020
      19:05:44.341 [e2-core] decoder state: play, vpid=767, apid=771
      19:05:44.342 [e2-core] no version filtering
      19:05:44.343 [e2-core] 0030: 74 00 00 00 00 00
      19:05:44.343 [e2-core] mask: ff 00 00 00 00 00
      19:05:44.343 [e2-core] mode: 00 00 00 00 00 00
      19:05:44.406 [e2-core] [eDVBCAService] new service 1:0:19:81:6:85:C00000:0:0:0:
      19:05:44.407 [e2-core] [eDVBCAService] add demux 0 to slot 0 service 1:0:19:81:6:85:C00000:0:0:0:
      19:05:44.407 [e2-core] demux 0 mask 01 prevhash 00000000
      19:05:44.407 [e2-core] [eDVBCAService] send 72 bytes
      19:05:44.408 [e2-core] 9f 80 32 44 03 00 81 21 00 25 01 81 08 00 c0 00 00 00 06 00 85 82 02 01 00 84 02 00 62 09 04 09 c4 fb ba 09 04 09 af ff ba 09 04 09 8c fa ba 06 00 20 00 00 05 00 30 00 00 1b 02 ff 00 00 06 03 02 00 00 06 03 03 00 00
      19:05:44.408 [e2-core] doing version filtering
      19:05:44.409 [e2-core] 0062: 02 00 81 21 00 00
      19:05:44.409 [e2-core] mask: ff ff ff 3f 00 00
      19:05:44.409 [e2-core] mode: 00 00 00 3e 00 00
      19:05:44.410 [e2-core] +- 1/2 TID 4e
      19:05:44.922 [e2-core] sdt update done!
      19:05:45.065 [e2-core] [eDVBLocalTimerHandler] diff is -2
      19:05:45.065 [e2-core] [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      19:05:45.175 [e2-core] [eDVBLocalTimerHandler] update RTC
      19:05:45.176 [e2-core] [eDVBLocalTimerHandler] time update to 19:05:43
      19:05:45.176 [e2-core] [eDVBLocalTimerHandler] m_time_difference is -2
      19:05:45.176 [e2-core] [eDVBLocalTimerHandler] set Linux Time
      19:05:45.265 [e2-core] + 1/1 TID 74
      19:05:45.265 [e2-core] done!
      19:05:45.266 [e2-core] AITready
      19:05:45.267 [e2-core] Section Length : 82, Total Section Length : 85
      19:05:45.267 [e2-core] found applicaions ids >> pid : ffffffff, orgid : 4, appid : 10
      19:05:45.268 [e2-core] Found : control[2], name[SKY], url[sky.spcode.tv/rb_sky.php]
      19:05:45.269 [e2-python] Name : SKY
      19:05:45.270 [e2-python] URL : sky.spcode.tv/rb_sky.php
      19:05:45.271 [e2-python] OrgID : 4
      19:05:45.271 [e2-python] AppID : 10
      19:05:45.272 [e2-python] Control Code : 2
      19:05:45.273 [e2-python] Profile Code : 0
      19:05:45.273 [e2-python]
      19:05:45.274 [e2-python] (2, 'SKY', 'http://sky.spcode.tv/rb_sky.php', 4, 10, 0)
      19:05:45.274 [e2-python] [AutoRes] determineContent
      19:05:45.276 [e2-python] [AutoRes] switch deinterlacer mode to on
      19:05:45.277 [e2-python] [AutoRes] new content is 1920x1080i25
      19:05:45.277 [e2-python] [AutoRes] determined videomode 1080i
      19:05:45.377 [e2-core] ++ 2/2 TID 4e
      19:05:45.377 [e2-core] done!
      19:05:45.404 [e2-core] doing version filtering
      19:05:45.404 [e2-core] 0012: 4e 00 81 27 00 00
      19:05:45.404 [e2-core] mask: ff ff ff 3f 00 00
      19:05:45.404 [e2-core] mode: 00 00 00 3e 00 00
      19:05:46.176 [e2-core] [eEPGCache] start caching events(1455818746)
      19:05:48.120 [e2-python] action -> WizardActions down
      19:05:48.351 [e2-python] action -> DirectionActions downUp
      19:05:48.351 [e2-python] unknown action DirectionActions/downUp! typo in keymap?
      19:05:48.669 [e2-python] action -> WizardActions ok
      19:05:48.758 [e2-python] playing service..
      19:05:48.759 [e2-core] [eDVBCAService] free slot 0 demux 0 for service 1:0:19:81:6:85:C00000:0:0:0:
      19:05:48.759 [e2-core] [eDVBCAService] free service 1:0:19:81:6:85:C00000:0:0:0:
      19:05:48.774 [e2-core] decoder state: play, vpid=-1, apid=-1
      19:05:48.774 [e2-core] DEMUX_STOP - pcr - ok
      19:05:48.775 [e2-core] DEMUX_STOP - video - ok
      19:05:48.776 [e2-core] VIDEO_STOP - ok
      19:05:48.799 [e2-core] AUDIO_STOP - ok
      19:05:48.799 [e2-core] DEMUX_STOP - audio - ok
      19:05:48.799 [e2-core] AUDIO_CONTINUE - ok
      19:05:48.800 [e2-core] DEMUX_STOP - ttx - ok
      19:05:48.805 [e2-core] start release channel timer
      19:05:48.831 [e2-python] not pauseable.
      19:05:48.832 [e2-python] RemovePopup, id = ZapError
      19:05:48.832 [e2-core] [eDVBCAService] remove channel 0x227b660
      19:05:48.833 [e2-core] [eDVBLocalTimerHandler] remove channel 0x227b660
      19:05:48.833 [e2-core] [eEPGCache] remove channel 0x227b660
      19:05:48.834 [e2-core] [eEPGCache] abort caching events !!
      19:05:48.840 [e2-core] allocate channel.. 000d:0085
      19:05:48.843 [e2-core] [eDVBCAService] new channel 0x227b660!
      19:05:48.843 [e2-core] (0)tune
      19:05:48.843 [e2-core] RotorCmd ffffffff, lastRotorCmd ffffffff
      19:05:48.844 [e2-core] prepare_sat System 1 Freq 11992500 Pol 0 SR 27500000 INV 2 FEC 9 orbpos 192 system 1 modulation 1 pilot 2, rolloff 0
      19:05:48.844 [e2-core] tuning to 1392 mhz
      19:05:48.844 [e2-core] OURSTATE: tuning
      19:05:48.844 [e2-core] allocate Channel: res 0
      19:05:48.845 [e2-core] allocate demux
      19:05:48.845 [e2-core] resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      19:05:48.845 [e2-core] resolve: -> /etc/scan_tp_valid_check.py
      19:05:48.847 [e2-core] [SEC] set static current limiting
      19:05:48.848 [e2-core] [SEC] invalidate current switch params
      19:05:48.848 [e2-core] set sequence pos 3
      19:05:48.849 [e2-core] set sequence pos 3
      19:05:48.849 [e2-core] [SEC] update current switch params
      19:05:48.850 [e2-core] [SEC] startTuneTimeout 5000
      19:05:48.850 [e2-core] [SEC] setFrontend 1
      19:05:48.850 [e2-core] setting frontend 0
      19:05:48.853 [e2-core] [SEC] sleep 500ms
      19:05:49.505 [e2-core] (0)fe event: status 0, inversion off, m_tuning 1
      19:05:49.526 [e2-core] [SEC] set dynamic current limiting
      19:05:49.622 [e2-core] (0)fe event: status 1f, inversion off, m_tuning 2
      19:05:49.622 [e2-core] OURSTATE: ok
      19:05:49.623 [e2-core] [eDVBCAService] channel 0x227b660 running
      19:05:49.623 [e2-core] [eDVBLocalTimerHandler] channel 0x227b660 running
      19:05:49.623 [e2-core] no version filtering
      19:05:49.623 [e2-core] 0014: 70 00 00 00 00 00
      19:05:49.624 [e2-core] mask: fc 00 00 00 00 00
      19:05:49.624 [e2-core] mode: 00 00 00 00 00 00
      19:05:49.625 [e2-core] [eEPGCache] channel 0x227b660 running
      19:05:49.625 [e2-core] [eEPGCache] next update in 2 sec
      19:05:49.625 [e2-core] stop release channel timer
      19:05:49.626 [e2-core] no version filtering
      19:05:49.626 [e2-core] 0012: 4e 00 72 00 00 00
      19:05:49.626 [e2-core] mask: ff ff ff 00 00 00
      19:05:49.627 [e2-core] mode: 00 00 00 00 00 00
      19:05:49.630 [e2-core] ok ... now we start!!
      19:05:49.631 [e2-core] no version filtering
      19:05:49.631 [e2-core] 0000: 00 00 00 00 00 00
      19:05:49.631 [e2-core] mask: ff 00 00 00 00 00
      19:05:49.631 [e2-core] mode: 00 00 00 00 00 00
      19:05:49.632 [e2-core] eventNewProgramInfo 0 0
      19:05:49.632 [e2-core] have 1 video stream(s) (03ff), and 1 audio stream(s) (0403), and the pcr pid is 03ff, and the text pid is 0020
      19:05:49.633 [e2-core] allocate demux
      19:05:49.638 [e2-core] disable teletext subtitles
      19:05:49.639 [e2-core] decoder state: play, vpid=1023, apid=1027
      19:05:49.640 [e2-core] DMX_SET_PES_FILTER(0x3ff) - pcr - ok
      19:05:49.640 [e2-core] DEMUX_START - pcr - ok
      19:05:49.641 [e2-core] DMX_SET_PES_FILTER(0x403) - audio - ok
      19:05:49.641 [e2-core] DEMUX_START - audio - ok
      19:05:49.641 [e2-core] AUDIO_SET_BYPASS(0) - ok
      19:05:49.642 [e2-core] AUDIO_PAUSE - ok
      19:05:49.644 [e2-core] AUDIO_PLAY - ok
      19:05:49.645 [e2-core] Video Device: /dev/dvb/adapter0/video0
      19:05:49.645 [e2-core] demux device: /dev/dvb/adapter0/demux0
      19:05:49.646 [e2-core] VIDEO_SET_STREAMTYPE 1 - ok
      19:05:49.646 [e2-core] DMX_SET_PES_FILTER(0x3ff) - video - ok
      19:05:49.646 [e2-core] DEMUX_START - video - ok
      19:05:49.647 [e2-core] VIDEO_FREEZE - ok
      19:05:49.652 [e2-core] VIDEO_PLAY - ok
      19:05:49.653 [e2-core] DMX_SET_PES_FILTER(0x20) - ttx - ok
      19:05:49.653 [e2-core] DEMUX_START - ttx - ok
      19:05:49.658 [e2-core] VIDEO_SLOWMOTION(0) - ok
      19:05:49.658 [e2-core] VIDEO_FAST_FORWARD(0) - ok
      19:05:49.658 [e2-core] VIDEO_CONTINUE - ok
      19:05:49.659 [e2-core] AUDIO_CONTINUE - ok
      19:05:49.660 [e2-python] not pauseable.
      19:05:49.724 [e2-python] [AutoRes] service changed
      19:05:49.731 [e2-core] + 1/1 TID 00
      19:05:49.731 [e2-core] done!
      19:05:49.732 [e2-core] PATready
      19:05:49.733 [e2-core] use pmtpid 0063 for service_id 0072
      19:05:49.733 [e2-core] no version filtering
      19:05:49.734 [e2-core] 0063: 02 00 72 00 00 00
      19:05:49.734 [e2-core] mask: ff ff ff 00 00 00
      19:05:49.734 [e2-core] mode: 00 00 00 00 00 00
      19:05:49.735 [e2-core] doing version filtering
      19:05:49.736 [e2-core] 0000: 00 00 00 2b 00 00
      19:05:49.736 [e2-core] mask: ff 00 00 3f 00 00
      19:05:49.736 [e2-core] mode: 00 00 00 3e 00 00
      19:05:49.818 [e2-core] + 1/1 TID 02
      19:05:49.818 [e2-core] done!
      19:05:49.819 [e2-core] eventNewProgramInfo 0 0
      19:05:49.819 [e2-core] no version filtering
      19:05:49.820 [e2-core] 0030: 74 00 00 00 00 00
      19:05:49.820 [e2-core] mask: ff 00 00 00 00 00
      19:05:49.820 [e2-core] mode: 00 00 00 00 00 00
      19:05:49.821 [e2-core] have 1 video stream(s) (03ff), and 3 audio stream(s) (0402, 0403, 0404), and the pcr pid is 03ff, and the text pid is 0020
      19:05:49.823 [e2-core] decoder state: play, vpid=1023, apid=1027
      19:05:49.825 [e2-core] no version filtering
      19:05:49.825 [e2-core] 0030: 74 00 00 00 00 00
      19:05:49.825 [e2-core] mask: ff 00 00 00 00 00
      19:05:49.826 [e2-core] mode: 00 00 00 00 00 00
      19:05:49.942 [e2-core] [eDVBCAService] new service 1:0:19:72:D:85:C00000:0:0:0:
      19:05:49.942 [e2-core] [eDVBCAService] add demux 0 to slot 0 service 1:0:19:72:D:85:C00000:0:0:0:
      19:05:49.943 [e2-core] demux 0 mask 01 prevhash 00000000
      19:05:49.943 [e2-core] [eDVBCAService] send 77 bytes
      19:05:49.944 [e2-core] 9f 80 32 49 03 00 72 2d 00 25 01 81 08 00 c0 00 00 00 0d 00 85 82 02 01 00 84 02 00 63 09 04 09 c4 fb 01 09 04 09 af ff 01 09 04 09 8c fa 01 06 00 20 00 00 05 00 30 00 00 1b 03 ff 00 00 06 04 02 00 00 06 04 03 00 00 06 04 04 00 00
      19:05:49.944 [e2-core] doing version filtering
      19:05:49.945 [e2-core] 0063: 02 00 72 2d 00 00
      19:05:49.945 [e2-core] mask: ff ff ff 3f 00 00
      19:05:49.945 [e2-core] mode: 00 00 00 3e 00 00
      19:05:49.991 [e2-core] sdt update done!
      19:05:49.999 [e2-core] +- 1/2 TID 4e
      19:05:50.357 [e2-core] + 1/1 TID 74
      19:05:50.358 [e2-core] done!
      19:05:50.358 [e2-core] AITready
      19:05:50.359 [e2-core] Section Length : 82, Total Section Length : 85
      19:05:50.359 [e2-core] found applicaions ids >> pid : ffffffff, orgid : 4, appid : 10
      19:05:50.360 [e2-core] Found : control[2], name[SKY], url[sky.spcode.tv/rb_sky.php]
      19:05:50.362 [e2-python] Name : SKY
      19:05:50.363 [e2-python] URL : sky.spcode.tv/rb_sky.php
      19:05:50.363 [e2-python] OrgID : 4
      19:05:50.364 [e2-python] AppID : 10
      19:05:50.365 [e2-python] Control Code : 2
      19:05:50.365 [e2-python] Profile Code : 0
      19:05:50.366 [e2-python]
      19:05:50.367 [e2-python] (2, 'SKY', 'http://sky.spcode.tv/rb_sky.php', 4, 10, 0)
      19:05:50.725 [e2-python] [AutoRes] determineContent
      19:05:50.727 [e2-python] [AutoRes] switch deinterlacer mode to on
      19:05:50.728 [e2-python] [AutoRes] new content is 1920x1080i25
      19:05:50.729 [e2-python] [AutoRes] determined videomode 1080i
      19:05:50.901 [e2-core] ++ 2/2 TID 4e
      19:05:50.901 [e2-core] done!
      19:05:50.928 [e2-core] doing version filtering
      19:05:50.928 [e2-core] 0012: 4e 00 72 2f 00 00
      19:05:50.928 [e2-core] mask: ff ff ff 3f 00 00
      19:05:50.929 [e2-core] mode: 00 00 00 3e 00 00
      19:05:51.385 [e2-core] [eDVBLocalTimerHandler] diff is -2
      19:05:51.386 [e2-core] [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      19:05:51.496 [e2-core] [eDVBLocalTimerHandler] update RTC
      19:05:51.496 [e2-core] [eDVBLocalTimerHandler] time update to 19:05:49
      19:05:51.496 [e2-core] [eDVBLocalTimerHandler] m_time_difference is -2
      19:05:51.497 [e2-core] [eDVBLocalTimerHandler] set Linux Time
      19:05:51.615 [e2-core] [eEPGCache] start caching events(1455818751)
      19:05:51.819 [e2-python] [EPGView] select current service
      19:05:55.255 [e2-python] action -> OkCancelActions cancel
      19:05:56.050 [e2-python] action -> InfobarSubserviceQuickzapActions exit
      19:05:56.051 [e2-python] unknown action InfobarSubserviceQuickzapActions/exit! typo in keymap?
      19:05:56.052 [e2-python] action -> InfobarShowHideActions toggleShow
      19:05:58.622 [e2-core] [eEPGCache] abort non avail schedule other reading
      19:05:58.624 [e2-core] [eEPGCache] abort non avail viasat reading
      19:05:58.624 [e2-core] [eEPGCache] abort non avail mhw reading
      19:05:58.636 [e2-core] [eEPGCache] nownext finished(1455818758)
      19:05:59.715 [e2-python] [92m[EPG Share] Grab Channel EPG[0m
      19:05:59.715 [e2-python] [92m[EPG Share] Sky †Sport‡ †HD 2‡ 1:0:19:72:D:85:C00000:0:0:0:[0m
      19:05:59.728 [e2-python] [92m[EPG Share] Count 48 from 48 Events[0m
      19:05:59.954 [e2-python] <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
      <html><head>
      <title>404 Not Found</title>
      </head><body>
      <h1>Not Found</h1>
      <p>The requested URL /import_epg.php was not found on this server.</p>
      <hr>
      <address>Apache Server at achansel.lima-city.de Port 80</address>
      </body></html>
      19:05:59.955 [e2-python]
      19:06:01.698 [e2-core] [eEPGCache] schedule finished(1455818761)
      19:06:01.700 [e2-core] [eEPGCache] stop caching events(1455818761)
      19:06:01.700 [e2-core] [eEPGCache] next update in 60 min
      19:06:09.629 [e2-core] no ancillary data in audio stream... abort radiotext pes parser
      19:12:44.349 [e2-python] AtileHD lookup for ID 656853
      19:19:03.457 [e2-core] child has terminated
      19:19:03.458 [e2-core] pipes closed
      19:22:43.375 [e2-python] [92m[EPG Share] Hole EPG Daten vom Server[0m
      19:22:43.934 [e2-python] [92m[EPG Share] Fehler beim EPG Download !!![0m
      19:22:44.364 [e2-python] AtileHD lookup for ID 656853
      19:22:58.640 [e2-core] [eEPGCache] release locked EPG database memory
      19:25:23.908 [e2-python] setValue 0
      19:30:02.808 [e2-core] child has terminated
      19:30:02.809 [e2-core] pipes closed
      19:30:02.810 [e2-core] child has terminated
      19:30:02.810 [e2-core] pipes closed
      19:30:12.780 [e2-core] child has terminated
      19:30:12.781 [e2-core] pipes closed
      19:32:44.364 [e2-python] AtileHD lookup for ID 656853
      19:33:01.235 [e2-python] setValue 95
      19:35:51.485 [e2-core] no version filtering
      19:35:51.486 [e2-core] 0014: 70 00 00 00 00 00
      19:35:51.486 [e2-core] mask: fc 00 00 00 00 00
      19:35:51.486 [e2-core] mode: 00 00 00 00 00 00
      19:35:52.510 [e2-core] [eDVBLocalTimerHandler] diff is -2
      19:35:52.511 [e2-core] [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      19:35:52.630 [e2-core] [eDVBLocalTimerHandler] difference between linux time and RTC time is < 60 sec... so the transponder time looks ok
      19:35:52.630 [e2-core] [eDVBLocalTimerHandler] time update to 19:35:50
      19:35:52.631 [e2-core] [eDVBLocalTimerHandler] m_time_difference is -2
      19:35:52.631 [e2-core] [eDVBLocalTimerHandler] set Linux Time
      19:36:35.836 [e2-python] AT plugin not found
      19:36:35.838 [e2-python] ER plugin not found
      19:36:35.842 [e2-python] AT plugin not found
      19:36:35.844 [e2-python] ER plugin not found
      19:36:35.849 [e2-python] AT plugin not found
      19:36:35.850 [e2-python] ER plugin not found
      19:36:35.854 [e2-python] AT plugin not found
      19:36:35.855 [e2-python] ER plugin not found
      19:36:35.860 [e2-python] AT plugin not found
      19:36:35.861 [e2-python] ER plugin not found
      19:36:35.870 [e2-python] AT plugin not found
      19:36:35.871 [e2-python] ER plugin not found
      19:36:35.873 [e2-python] [OpenWebif] page 'http://zc.qq.com/cgi-bin/common/attr?id=260714&r=0.3404035544104940' not found
      19:42:33.132 [e2-core] child has terminated
      19:42:33.133 [e2-core] pipes closed
      19:42:44.352 [e2-python] AtileHD lookup for ID 656853
      19:47:43.761 [e2-python] setValue 0
      19:52:44.353 [e2-python] AtileHD lookup for ID 656853
      19:58:03.143 [e2-core] child has terminated
      19:58:03.144 [e2-core] pipes closed
      20:02:44.352 [e2-python] AtileHD lookup for ID 656853
      20:05:52.621 [e2-core] no version filtering
      20:05:52.621 [e2-core] 0014: 70 00 00 00 00 00
      20:05:52.621 [e2-core] mask: fc 00 00 00 00 00
      20:05:52.621 [e2-core] mode: 00 00 00 00 00 00
      20:05:53.647 [e2-core] [eDVBLocalTimerHandler] diff is -1
      20:05:53.647 [e2-core] [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      20:05:53.767 [e2-core] [eDVBLocalTimerHandler] difference between linux time and RTC time is < 60 sec... so the transponder time looks ok
      20:05:53.767 [e2-core] [eDVBLocalTimerHandler] time update to 20:05:52
      20:05:53.767 [e2-core] [eDVBLocalTimerHandler] m_time_difference is -1
      20:05:53.767 [e2-core] [eDVBLocalTimerHandler] set Linux Time
      20:06:01.699 [e2-core] [eEPGCache] start caching events(1455822361)
      20:06:08.704 [e2-core] [eEPGCache] abort non avail schedule other reading
      20:06:08.706 [e2-core] [eEPGCache] abort non avail viasat reading
      20:06:08.706 [e2-core] [eEPGCache] abort non avail mhw reading
      20:06:08.708 [e2-core] [eEPGCache] nownext finished(1455822368)
      20:06:18.772 [e2-core] [eEPGCache] schedule finished(1455822378)
      20:06:18.773 [e2-core] [eEPGCache] stop caching events(1455822378)
      20:06:18.773 [e2-core] [eEPGCache] next update in 60 min
      20:12:03.120 [e2-core] child has terminated
      20:12:03.121 [e2-core] pipes closed
      20:12:44.342 [e2-python] AtileHD lookup for ID 656853
      20:19:03.126 [e2-core] child has terminated
      20:19:03.127 [e2-core] pipes closed
      20:22:44.342 [e2-python] AtileHD lookup for ID 656853
      20:28:13.450 [e2-core] + 1/1 TID 02
      20:28:13.451 [e2-core] done!
      20:28:13.451 [e2-core] eventNewProgramInfo 0 0
      20:28:13.452 [e2-core] have 1 video stream(s) (03ff), and 3 audio stream(s) (0402, 0403, 0404), and the pcr pid is 03ff, and the text pid is 0020
      20:28:13.453 [e2-core] decoder state: play, vpid=1023, apid=1027
      20:28:13.518 [e2-core] demux 0 mask 01 prevhash 00630116
      20:28:13.519 [e2-core] [eDVBCAService] send 72 bytes
      20:28:13.520 [e2-core] 9f 80 32 44 05 00 72 2f 00 25 01 81 08 00 c0 00 00 00 0d 00 85 82 02 01 00 84 02 00 63 09 04 09 c4 fb 01 09 04 09 af ff 01 09 04 09 8c fa 01 06 00 20 00 00 1b 03 ff 00 00 06 04 02 00 00 06 04 03 00 00 06 04 04 00 00
      20:28:13.520 [e2-core] doing version filtering
      20:28:13.520 [e2-core] 0063: 02 00 72 2f 00 00
      20:28:13.521 [e2-core] mask: ff ff ff 3f 00 00
      20:28:13.521 [e2-core] mode: 00 00 00 3e 00 00
      20:28:15.252 [e2-core] + 1/1 TID 02
      20:28:15.252 [e2-core] done!
      20:28:15.253 [e2-core] eventNewProgramInfo 0 0
      20:28:15.253 [e2-core] no version filtering
      20:28:15.254 [e2-core] 0030: 74 00 00 00 00 00
      20:28:15.254 [e2-core] mask: ff 00 00 00 00 00
      20:28:15.254 [e2-core] mode: 00 00 00 00 00 00
      20:28:15.256 [e2-core] have 1 video stream(s) (03ff), and 3 audio stream(s) (0402, 0403, 0404), and the pcr pid is 03ff, and the text pid is 0020
      20:28:15.257 [e2-core] decoder state: play, vpid=1023, apid=1027
      20:28:15.259 [e2-core] no version filtering
      20:28:15.259 [e2-core] 0030: 74 00 00 00 00 00
      20:28:15.259 [e2-core] mask: ff 00 00 00 00 00
      20:28:15.260 [e2-core] mode: 00 00 00 00 00 00
      20:28:15.321 [e2-core] demux 0 mask 01 prevhash 00630117
      20:28:15.322 [e2-core] [eDVBCAService] send 77 bytes
      20:28:15.323 [e2-core] 9f 80 32 49 05 00 72 31 00 25 01 81 08 00 c0 00 00 00 0d 00 85 82 02 01 00 84 02 00 63 09 04 09 c4 fb 01 09 04 09 af ff 01 09 04 09 8c fa 01 06 00 20 00 00 05 00 30 00 00 1b 03 ff 00 00 06 04 02 00 00 06 04 03 00 00 06 04 04 00 00
      20:28:15.323 [e2-core] doing version filtering
      20:28:15.323 [e2-core] 0063: 02 00 72 31 00 00
      20:28:15.323 [e2-core] mask: ff ff ff 3f 00 00
      20:28:15.324 [e2-core] mode: 00 00 00 3e 00 00
      20:28:15.470 [e2-core] + 1/1 TID 02
      20:28:15.470 [e2-core] done!
      20:28:15.471 [e2-core] eventNewProgramInfo 0 0
      20:28:15.472 [e2-core] no version filtering
      20:28:15.473 [e2-core] 0030: 74 00 00 00 00 00
      20:28:15.473 [e2-core] mask: ff 00 00 00 00 00
      20:28:15.473 [e2-core] mode: 00 00 00 00 00 00
      20:28:15.474 [e2-core] have 1 video stream(s) (03ff), and 3 audio stream(s) (0402, 0403, 0404), and the pcr pid is 03ff, and the text pid is 0020
      20:28:15.475 [e2-core] decoder state: play, vpid=1023, apid=1027
      20:28:15.476 [e2-core] no version filtering
      20:28:15.477 [e2-core] 0030: 74 00 00 00 00 00
      20:28:15.477 [e2-core] mask: ff 00 00 00 00 00
      20:28:15.477 [e2-core] mode: 00 00 00 00 00 00
      20:28:15.539 [e2-core] demux 0 mask 01 prevhash 00630118
      20:28:15.539 [e2-core] [eDVBCAService] send 77 bytes
      20:28:15.540 [e2-core] 9f 80 32 49 05 00 72 33 00 25 01 81 08 00 c0 00 00 00 0d 00 85 82 02 01 00 84 02 00 63 09 04 09 c4 fb 01 09 04 09 af ff 01 09 04 09 8c fa 01 06 00 20 00 00 05 00 30 00 00 1b 03 ff 00 00 06 04 02 00 00 06 04 03 00 00 06 04 04 00 00
      20:28:15.540 [e2-core] doing version filtering
      20:28:15.540 [e2-core] 0063: 02 00 72 33 00 00
      20:28:15.541 [e2-core] mask: ff ff ff 3f 00 00
      20:28:15.541 [e2-core] mode: 00 00 00 3e 00 00
      20:28:18.146 [e2-core] + 1/1 TID 74
      20:28:18.147 [e2-core] done!
      20:28:18.148 [e2-core] AITready
      20:28:18.148 [e2-core] Section Length : 82, Total Section Length : 85
      20:28:18.148 [e2-core] found applicaions ids >> pid : ffffffff, orgid : 4, appid : 10
      20:28:18.148 [e2-core] Found : control[2], name[SKY], url[sky.spcode.tv/rb_sky.php]
      20:28:18.150 [e2-python] Name : SKY
      20:28:18.151 [e2-python] URL : sky.spcode.tv/rb_sky.php
      20:28:18.151 [e2-python] OrgID : 4
      20:28:18.152 [e2-python] AppID : 10
      20:28:18.153 [e2-python] Control Code : 2
      20:28:18.153 [e2-python] Profile Code : 0
      20:28:18.154 [e2-python]
      20:28:18.155 [e2-python] (2, 'SKY', 'http://sky.spcode.tv/rb_sky.php', 4, 10, 0)
      20:28:21.892 [e2-core] + 1/1 TID 00
      20:28:22.139 [e2-core] done!
      20:28:22.140 [e2-core] PATready
      20:28:22.140 [e2-core] use pmtpid 0063 for service_id 0072
      20:28:22.141 [e2-core] no version filtering
      20:28:22.141 [e2-core] 0063: 02 00 72 00 00 00
      20:28:22.142 [e2-core] mask: ff ff ff 00 00 00
      20:28:22.142 [e2-core] mode: 00 00 00 00 00 00
      20:28:22.143 [e2-core] doing version filtering
      20:28:22.143 [e2-core] 0000: 00 00 00 2d 00 00
      20:28:22.143 [e2-core] mask: ff 00 00 3f 00 00
      20:28:22.143 [e2-core] mode: 00 00 00 3e 00 00
      20:28:22.241 [e2-core] + 1/1 TID 02
      20:28:22.241 [e2-core] done!
      20:28:22.242 [e2-core] eventNewProgramInfo 0 0
      20:28:22.242 [e2-core] no version filtering
      20:28:22.242 [e2-core] 0030: 74 00 00 00 00 00
      20:28:22.243 [e2-core] mask: ff 00 00 00 00 00
      20:28:22.243 [e2-core] mode: 00 00 00 00 00 00
      20:28:22.244 [e2-core] have 1 video stream(s) (03ff), and 3 audio stream(s) (0402, 0403, 0404), and the pcr pid is 03ff, and the text pid is 0020
      20:28:22.245 [e2-core] decoder state: play, vpid=1023, apid=1027
      20:28:22.246 [e2-core] no version filtering
      20:28:22.246 [e2-core] 0030: 74 00 00 00 00 00
      20:28:22.247 [e2-core] mask: ff 00 00 00 00 00
      20:28:22.247 [e2-core] mode: 00 00 00 00 00 00
      20:28:22.308 [e2-core] demux 0 mask 01 prevhash 00630119
      20:28:22.309 [e2-core] [eDVBCAService] don't build/send the same CA PMT twice
      20:28:22.310 [e2-core] doing version filtering
      20:28:22.310 [e2-core] 0063: 02 00 72 33 00 00
      20:28:22.310 [e2-core] mask: ff ff ff 3f 00 00
      20:28:22.311 [e2-core] mode: 00 00 00 3e 00 00
      20:28:23.257 [e2-core] + 1/1 TID 74
      20:28:23.257 [e2-core] done!
      20:28:23.258 [e2-core] AITready
      20:28:23.259 [e2-core] Section Length : 82, Total Section Length : 85
      20:28:23.259 [e2-core] found applicaions ids >> pid : ffffffff, orgid : 4, appid : 10
      20:28:23.259 [e2-core] Found : control[2], name[SKY], url[sky.spcode.tv/rb_sky.php]
      20:28:23.261 [e2-python] Name : SKY
      20:28:23.261 [e2-python] URL : sky.spcode.tv/rb_sky.php
      20:28:23.262 [e2-python] OrgID : 4
      20:28:23.263 [e2-python] AppID : 10
      20:28:23.263 [e2-python] Control Code : 2
      20:28:23.264 [e2-python] Profile Code : 0
      20:28:23.264 [e2-python]
      20:28:23.265 [e2-python] (2, 'SKY', 'http://sky.spcode.tv/rb_sky.php', 4, 10, 0)
      20:30:04.569 [e2-core] child has terminated
      20:30:04.569 [e2-core] pipes closed
      20:30:14.540 [e2-core] child has terminated
      20:30:14.540 [e2-core] pipes closed
      20:30:14.542 [e2-core] child has terminated
      20:30:14.542 [e2-core] pipes closed
      20:32:44.341 [e2-python] AtileHD lookup for ID 656853
      20:35:53.756 [e2-core] no version filtering
      20:35:53.756 [e2-core] 0014: 70 00 00 00 00 00
      20:35:53.757 [e2-core] mask: fc 00 00 00 00 00
      20:35:53.757 [e2-core] mode: 00 00 00 00 00 00
      20:35:54.857 [e2-core] [eDVBLocalTimerHandler] diff is -1
      20:35:54.857 [e2-core] [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
      20:35:54.977 [e2-core] [eDVBLocalTimerHandler] difference between linux time and RTC time is < 60 sec... so the transponder time looks ok
      20:35:54.978 [e2-core] [eDVBLocalTimerHandler] time update to 20:35:53
      20:35:54.978 [e2-core] [eDVBLocalTimerHandler] m_time_difference is -1
      20:35:54.978 [e2-core] [eDVBLocalTimerHandler] set Linux Time
      20:42:33.126 [e2-core] child has terminated
      20:42:33.127 [e2-core] pipes closed
      20:42:44.330 [e2-python] AtileHD lookup for ID 656853
      20:48:44.006 [e2-python] action -> WizardActions back
      20:48:47.157 [e2-core] main thread is non-idle! display spinner!
      20:48:47.413 [e2-python] action -> InfobarSubserviceQuickzapActions exit
      20:48:47.414 [e2-python] unknown action InfobarSubserviceQuickzapActions/exit! typo in keymap?
      20:48:47.414 [e2-python] action -> InfobarShowHideActions toggleShow
      20:48:48.219 [e2-python] action -> InfobarSubserviceQuickzapActions exit
      20:48:48.220 [e2-python] unknown action InfobarSubserviceQuickzapActions/exit! typo in keymap?
      20:48:48.220 [e2-python] action -> InfobarShowHideActions toggleShow
      20:50:14.849 [e2-python] AT plugin not found
      20:50:14.853 [e2-python] ER plugin not found
      20:50:14.858 [e2-python] AT plugin not found
      20:50:14.859 [e2-python] ER plugin not found
      20:50:14.864 [e2-python] AT plugin not found
      20:50:14.866 [e2-python] ER plugin not found
      20:50:14.870 [e2-python] AT plugin not found
      20:50:14.872 [e2-python] ER plugin not found
      20:50:14.874 [e2-python] [OpenWebif] page 'http://testp5.mielno.lubin.pl/testproxy.php' not found
      20:52:44.334 [e2-python] AtileHD lookup for ID 656853
      20:59:03.215 [e2-core] child has terminated
      20:59:06.394 [e2-core] pipes closed
      20:59:30.442 [e2-core] +- 1/2 TID 4e
      20:59:31.275 [e2-core] ++ 2/2 TID 4e
      20:59:31.275 [e2-core] done!
      20:59:31.381 [e2-core] doing version filtering
      20:59:31.381 [e2-core] 0012: 4e 00 72 31 00 00
      20:59:31.382 [e2-core] mask: ff ff ff 3f 00 00
      20:59:31.382 [e2-core] mode: 00 00 00 3e 00 00
      20:59:58.968 [e2-core] +- 1/2 TID 4e
      21:00:00.015 [e2-core] ++ 2/2 TID 4e
      21:00:00.048 [e2-core] done!
      21:00:00.768 [e2-core] doing version filtering
      21:00:00.774 [e2-core] 0012: 4e 00 72 33 00 00
      21:00:00.774 [e2-core] mask: ff ff ff 3f 00 00
      21:00:00.774 [e2-core] mode: 00 00 00 3e 00 00
      21:00:18.130 [e2-core] + 1/1 TID 02
      21:00:18.147 [e2-core] done!
      21:00:18.172 [e2-core] eventNewProgramInfo 0 0
      21:00:18.191 [e2-core] have 1 video stream(s) (03ff), and 3 audio stream(s) (0402, 0403, 0404), and the pcr pid is 03ff, and the text pid is 0020
      21:00:18.199 [e2-core] decoder state: play, vpid=1023, apid=1027
      21:00:19.033 [e2-core] demux 0 mask 01 prevhash 00630119
      21:00:19.048 [e2-core] [eDVBCAService] send 72 bytes
      21:00:19.050 [e2-core] 9f 80 32 44 05 00 72 35 00 25 01 81 08 00 c0 00 00 00 0d 00 85 82 02 01 00 84 02 00 63 09 04 09 c4 fb 01 09 04 09 af ff 01 09 04 09 8c fa 01 06 00 20 00 00 1b 03 ff 00 00 06 04 02 00 00 06 04 03 00 00 06 04 04 00 00
      21:00:19.099 [e2-core] doing version filtering
      21:00:19.104 [e2-core] 0063: 02 00 72 35 00 00
      21:00:19.105 [e2-core] mask: ff ff ff 3f 00 00
      21:00:19.106 [e2-core] mode: 00 00 00 3e 00 00
      21:00:23.353 [e2-core] main thread is non-idle! display spinner!
      21:00:25.805 [e2-core] + 1/1 TID 02
      21:00:25.817 [e2-core] done!
      21:00:25.827 [e2-core] eventNewProgramInfo 0 0
      21:00:25.831 [e2-core] no version filtering
      21:00:25.831 [e2-core] 0030: 74 00 00 00 00 00
      21:00:25.831 [e2-core] mask: ff 00 00 00 00 00
      21:00:25.832 [e2-core] mode: 00 00 00 00 00 00
      21:00:25.904 [e2-core] have 1 video stream(s) (03ff), and 3 audio stream(s) (0402, 0403, 0404), and the pcr pid is 03ff, and the text pid is 0020
      21:00:26.755 [e2-core] decoder state: play, vpid=1023, apid=1027
      21:00:27.159 [e2-core] no version filtering
      21:00:27.170 [e2-core] 0030: 74 00 00 00 00 00
      21:00:27.170 [e2-core] mask: ff 00 00 00 00 00
      21:00:27.171 [e2-core] mode: 00 00 00 00 00 00
      21:00:28.097 [e2-core] demux 0 mask 01 prevhash 0063011a
      21:00:28.134 [e2-core] [eDVBCAService] send 77 bytes
      21:00:28.136 [e2-core] 9f 80 32 49 05 00 72 37 00 25 01 81 08 00 c0 00 00 00 0d 00 85 82 02 01 00 84 02 00 63 09 04 09 c4 fb 01 09 04 09 af ff 01 09 04 09 8c fa 01 06 00 20 00 00 05 00 30 00 00 1b 03 ff 00 00 06 04 02 00 00 06 04 03 00 00 06 04 04 00 00
      21:00:28.162 [e2-core] doing version filtering
      21:00:28.163 [e2-core] 0063: 02 00 72 37 00 00
      21:00:28.163 [e2-core] mask: ff ff ff 3f 00 00
      21:00:28.163 [e2-core] mode: 00 00 00 3e 00 00
      21:00:29.405 [e2-core] main thread is non-idle! display spinner!
      21:00:42.890 [e2-core] main thread is non-idle! display spinner!
      21:00:55.794 [e2-core] timeout 0030!
      21:00:55.848 [e2-core] AITready
      21:01:15.294 [e2-core] main thread is non-idle! display spinner!
      21:02:21.678 [e2-core] main thread is non-idle! display spinner!
      SZ | VU+ Uno 4K SE | VTi 15.0.0 | 2 TB
      WZ | VU+ Uno 4K SE | VTi 15.0.0 | 1 TB
      SerienRecorder | CustomSubservices | iFlatFHD

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von MiSeRy ()

    • ...also bei mir funktioniert die 9.02 nun seit ca. 5 Tagen eigentlich fehlerfrei, bis auf ein etwas stärkeres Ruckeln des Timeshift nach einer langen Standbildzeit.
      Allerdings sind auch bei dem ganzen Hickhack von neuen Versionen aufspielen und darauffolgend die alte Version wieder herstellen kuriose Merkwürdigkeiten aufgefallen. Nach der letzten Wiederherstellung der alten 9.01 meinte die Systeminfo aber immer noch die 9.02 drauf zu haben.
      Wenn ich aber auf 'Neuigkeiten' ging, wurden mir aber die Softwarepakete der 9.02 zur Aktualisierung angeboten. Falls ich aber diese "9.01" als Backup sichern wollte, wurde sie bei mir als 9.02... gespeichert. Meine ganzen Plugins habe ich im Vorfeld immer aktuell gehalten, ohne die Firmware zu aktualisieren. Ich kann mir nicht vorstellen, dass das zu einer höheren Firmwareversion führt. Ich weiß aber auch nicht, wie es dazu gekommen ist.

      Jedenfalls habe ich letzten Freitag den Versuch gewagt und habe die Firmwarepakete upgedated (es waren glaube ich 8 an der Zahl).
      Danach läuft alles wie es soll, bis auf das etwas stärkere Ruckeln im Timeshift (stört nicht weiter). Das dieser Bericht keine große Hilfe darstellt, dass ist mir natürlich klar.

      -volker-
    • Genau das gleiche Proble hatte ich auch. Ursache war bei mir, dass der Arbeitsspeicher voll geschrieben wurde und dann wurde mit der SWAP Partition weiter gemacht. Erst als ich diese auf 2 GB gesetzt habe, war der Arbeitsspeicherverbrauch so groß, dass die Box nicht mehr abgestürzt ist.

      Lösung des Problems war die komplette neuinstallation des Images in Version 9.01. Die 9.02 machte immer wieder Pronleme, auch nach Neuinstallation ohne Übernahme der Einstellungen.

      Hier ist mein Thread von damals: Vu+ Solo 2 SE beendet Dienste, weil Ram voll läuft

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von malimaster ()

    • Das ist ja merkwürdig.
      Bei meiner Solo SE habe ich zum ersten Male erst gar keinen Swap eingerichtet. Eigentlich müsste der Speicher ja ausreichen (das tut er bei mir auch und bei mir hatte das wohl andere Gründe, dass der Dauerspinner kam).

      Entweder hast Du massiv Addons/Plugins drauf gehabt, oder ein Plugin hat einfach gesponnen. 2GB Swap sind doch im Normalfall niemals von nöten. Selbst ich habe hier 3,5 Seiten Plugins installiert und habe noch 195MB frei. Da sind auch Plugins bei, die ich nie brauche - war bisher aber zu faul sie zu deinstallieren.
      Stören ja auch nicht. :)